From: YhLu <YhLu@tyan.com>
To: jamesclv@us.ibm.com
Cc: Andi Kleen <ak@muc.de>, Matt Domsch <Matt_Domsch@dell.com>,
linux-kernel@vger.kernel.org, discuss@x86-64.org,
suresh.b.siddha@intel.com
Subject: RE: 256 apic id for amd64
Date: Fri, 7 Jan 2005 16:28:49 -0800 [thread overview]
Message-ID: <3174569B9743D511922F00A0C943142307291358@TYANWEB> (raw)
Then sepertate that into init_amd and init_intel.
YH
-----Original Message-----
From: James Cleverdon [mailto:jamesclv@us.ibm.com]
Sent: Friday, January 07, 2005 4:13 PM
To: YhLu
Cc: Andi Kleen; Matt Domsch; linux-kernel@vger.kernel.org;
discuss@x86-64.org; suresh.b.siddha@intel.com
Subject: Re: 256 apic id for amd64
Clustered APIC systems need the phys_proc_id to come from the APIC ID
register. Intel prefers that non-clustered systems get their
phys_proc_id from the cpuid opcode.
So, using c->x86_apicid is unlikely to satisfy both parties.
On Friday 07 January 2005 04:04 pm, YhLu wrote:
> arch/x86_64/kernel/setup.c
>
> static void __init detect_ht(struct cpuinfo_x86 *c)
>
> phys_proc_id[cpu] = phys_pkg_id(index_msb);
>
> --->
> Phy_proc_id[cpu] = cpu_to_node[cpu];
> Or
> // that is initial apicid
> phys_proc_id[cpu] = c->x86_apicid >>
> hweight32(c->x86_num_cores - 1);
>
> YH
>
> -----Original Message-----
> From: Andi Kleen [mailto:ak@muc.de]
> Sent: Friday, January 07, 2005 2:18 PM
> To: YhLu
> Cc: Matt Domsch; linux-kernel@vger.kernel.org; discuss@x86-64.org;
> jamesclv@us.ibm.com; suresh.b.siddha@intel.com
> Subject: Re: 256 apic id for amd64
>
> On Fri, Jan 07, 2005 at 01:44:19PM -0800, YhLu wrote:
> > Can you consider to use c->x86_apicid to get phy_proc_id, that is
> > initial apicid.?
>
> Where?
>
> -Andi
--
James Cleverdon
IBM LTC (xSeries Linux Solutions)
{jamesclv(Unix, preferred), cleverdj(Notes)} at us dot ibm dot comm
next reply other threads:[~2005-01-08 0:19 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-08 0:28 YhLu [this message]
2005-01-08 0:26 ` 256 apic id for amd64 James Cleverdon
2005-01-08 0:34 ` Andi Kleen
-- strict thread matches above, loose matches on Subject: below --
2005-01-11 19:11 YhLu
2005-01-11 19:04 YhLu
2005-01-10 20:48 YhLu
2005-01-10 20:46 YhLu
2005-01-11 5:36 ` Andi Kleen
2005-01-10 20:37 YhLu
2005-01-10 20:09 YhLu
2005-01-10 20:18 ` Andi Kleen
2005-01-10 19:41 YhLu
2005-01-10 19:43 ` Andi Kleen
2005-01-11 0:42 ` James Cleverdon
2005-01-11 3:28 ` Siddha, Suresh B
2005-01-11 4:42 ` Andi Kleen
2005-01-10 18:48 YhLu
2005-01-10 18:45 ` Andi Kleen
2005-01-10 18:44 Andi Kleen
2005-01-11 4:04 ` Siddha, Suresh B
2005-01-11 4:39 ` Andi Kleen
2005-01-11 17:50 ` Andi Kleen
2005-01-08 2:53 YhLu
2005-01-09 23:56 ` James Cleverdon
2005-01-08 2:37 Mikael Pettersson
2005-01-08 15:46 ` Andi Kleen
2005-01-08 1:50 YhLu
2005-01-08 0:50 YhLu
2005-01-08 0:42 ` Andi Kleen
2005-01-08 0:04 YhLu
2005-01-08 0:12 ` James Cleverdon
2005-01-07 21:44 YhLu
2005-01-07 22:18 ` Andi Kleen
2005-01-07 21:14 YhLu
2005-01-07 21:12 ` Andi Kleen
2005-01-07 19:43 YhLu
2005-01-07 19:40 ` Andi Kleen
2005-01-07 18:27 YhLu
2005-01-07 19:29 ` Andi Kleen
2005-01-07 18:19 YhLu
2005-01-07 19:29 ` Andi Kleen
2005-01-07 2:53 YhLu
2005-01-07 12:24 ` Andi Kleen
2005-01-08 1:30 ` James Cleverdon
2005-01-07 1:06 YhLu
2005-01-07 12:44 ` Andi Kleen
2004-12-30 23:19 YhLu
2004-12-30 23:16 YhLu
2004-12-29 4:43 YhLu
2004-12-30 18:45 ` Andi Kleen
2004-12-30 22:56 ` Matt Domsch
2004-12-30 23:26 ` Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3174569B9743D511922F00A0C943142307291358@TYANWEB \
--to=yhlu@tyan.com \
--cc=Matt_Domsch@dell.com \
--cc=ak@muc.de \
--cc=discuss@x86-64.org \
--cc=jamesclv@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=suresh.b.siddha@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).