Linux version 2.6.0-test1-mm1 (gf@gf) (gcc version 3.2.3) #1 Wed Jul 16 15:19:05 EEST 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000ffeb000 (usable) BIOS-e820: 000000000ffeb000 - 000000000ffef000 (ACPI data) BIOS-e820: 000000000ffef000 - 000000000ffff000 (reserved) BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65515 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61419 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 ACPI: RSDP (v000 ASUS ) @ 0x000f6b10 ACPI: RSDT (v001 ASUS P4T-E 12336.12337) @ 0x0ffeb000 ACPI: FADT (v001 ASUS P4T-E 12336.12337) @ 0x0ffeb100 ACPI: BOOT (v001 ASUS P4T-E 12336.12337) @ 0x0ffeb040 ACPI: MADT (v001 ASUS P4T-E 12336.12337) @ 0x0ffeb080 ACPI: DSDT (v001 ASUS P4T-E 00000.04096) @ 0x00000000 ACPI: BIOS passes blacklist Building zonelist for node : 0 Kernel command line: BOOT_IMAGE=2.6.0-test-mm1 ro root=301 video=matroxfb:vesa:0x11b,fv:75Hz Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 1607.594 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3170.30 BogoMIPS Memory: 255488k/262060k available (2164k kernel code, 5864k reserved, 793k data, 128k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K CPU: After generic, caps: 3febfbff 00000000 00000000 00000080 CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v2.0 (20020519) Initializing RT netlink socket PCI: PCI BIOS revision 2.10 entry at 0xf0e90, last bus=2 PCI: Using configuration type 1 BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030714 ACPI-0109: *** Error: No object was returned from [\_SB_.PCI0.PX40.UAR2._STA] (Node c12d7620), AE_NOT_EXIST ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Br ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] Linux Plug and Play Support v0.96 (c) Adam Belay Linux Kernel Card Services 3.1.22 options: [pci] [pm] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' matroxfb: Matrox G550 detected matroxfb: MTRR's turned on matroxfb: 1280x1024x32bpp (virtual: 1280x65536) matroxfb: framebuffer at 0xF6000000, mapped to 0xd080c000, size 33554432 fb0: MATROX frame buffer device fb0: initializing hardware pty: 256 Unix98 ptys configured SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x80 Enabling SEP on CPU 0 Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU] (supports C1) Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel i850 Chipset. agpgart: Maximum main memory to use for agp memory: 203M agpgart: AGP aperture is 64M @ 0xf8000000 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:02:0b.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xd800. Vers LK1.1.19 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 0000:00:1f.1 ICH2: chipset revision 4 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:pio, hdd:pio hda: ST340016A, ATA DISK drive anticipatory scheduling elevator ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: PLEXTOR CD-R PX-W4824A, ATAPI CD/DVD-ROM drive hdd: PIONEER DVD-RW DVR-103, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: host protected area => 1 hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100) hda: hda1 hda2 end_request: I/O error, dev hdc, sector 0 hdc: ATAPI 40X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 end_request: I/O error, dev hdd, sector 0 hdd: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, DMA matroxfb_crtc2: secondary head of fb0 was registered as fb1 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 Intel 810 + AC97 Audio, version 0.24, 15:14:30 Jul 16 2003 PCI: Setting latency timer of device 0000:00:1f.5 to 64 i810: Intel ICH2 found at IO 0xe100 and 0xe000, MEM 0x0000 and 0x0000, IRQ 4 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 ac97_codec: AC97 Audio codec, id: ALG16 (ALC200/200P) i810_audio: AC'97 codec 0 supports AMAP, total channels = 2 i810_audio: setting clocking to 48689 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 128k freed EXT3 FS on hda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice SCSI subsystem initialized call_verify: server accept status: 2 call_verify: server accept status: 2 call_verify: server accept status: 2 RPC: garbage, exit EIO nfs_get_root: getattr error = 5 nfs_read_super: get root inode failed nfs warning: mount version older than kernel call_verify: server accept status: 2 call_verify: server accept status: 2 call_verify: server accept status: 2 RPC: garbage, exit EIO nfs_get_root: getattr error = 5 nfs_read_super: get root inode failed nfs warning: mount version older than kernel call_verify: server accept status: 2 call_verify: server accept status: 2 call_verify: server accept status: 2 RPC: garbage, exit EIO nfs_get_root: getattr error = 5 nfs_read_super: get root inode failed nfs warning: mount version older than kernel call_verify: server accept status: 2 call_verify: server accept status: 2 call_verify: server accept status: 2 RPC: garbage, exit EIO nfs_get_root: getattr error = 5 nfs_read_super: get root inode failed nfs warning: mount version older than kernel call_verify: server accept status: 2 call_verify: server accept status: 2 call_verify: server accept status: 2 RPC: garbage, exit EIO nfs_get_root: getattr error = 5 nfs_read_super: get root inode failed nfs warning: mount version older than kernel blk: queue c041831c, I/O limit 4095Mb (mask 0xffffffff) mtrr: no MTRR for f6000000,1000000 found [drm] Initialized mga 3.1.0 20021029 on minor 0 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode