From: Yaroslav Klyukin <skintwin@mail.ru>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: Jens Axboe <axboe@suse.de>, Vojtech Pavlik <vojtech@suse.cz>,
Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>,
"Prakash K. Cheemplavam" <prakashkc@gmx.de>,
marcush@onlinehome.de, linux-kernel@vger.kernel.org,
eric_mudama@Maxtor.com
Subject: Re: Silicon Image 3112A SATA trouble
Date: Sun, 30 Nov 2003 16:05:14 -0500 [thread overview]
Message-ID: <3FCA5B8A.2020006@mail.ru> (raw)
In-Reply-To: <3FCA3787.1000104@pobox.com>
Jeff Garzik wrote:
> Jens Axboe wrote:
>
>> Ah, my line wasn't completely clear (to say the least)... So to clear
>> all doubts:
>>
>> if ((sector_count % 15 == 1) && (sector_count != 1))
>> errata path
>>
>> Agree?
>
>
>
> Agreed.
>
>
> The confusion here is most likely my fault, as my original post
> intentionally inverted the logic for illustrative purposes (hah!)...
>
>> Well, the constraint we must satisfy is
>>
>> sector_count % 15 != 1
>>
>> (i.e. "== 1" causes the lockup)
Hi, I just rebuilt my kernel with libata support.
I have 3112 Silicon Image controller with IDE drive attahed.
(I have 2 IDE drives, so I bought second controller to split load between them. One is connected to the MB IDE controller.)
When I run hdparm command, I can see strange behaviour of the ilbata driver:
[root@shrike root]# hdparm -t /dev/hda
/dev/hda:
Timing buffered disk reads: 64 MB in 1.19 seconds = 53.78 MB/sec
[root@shrike root]# hdparm -t /dev/sda1
/dev/sda1:
Timing buffered disk reads: read(1048576) returned 921600 bytes
[root@shrike root]#
Meanwhile -T switch works normally.
I know, that siimage support is broken, any ideas, what can possibly cause such errors?
Is it somehow linked to the error discussed in this message thread?
WBR.
next prev parent reply other threads:[~2003-11-30 21:05 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-25 13:59 Silicon Image 3112A SATA trouble Prakash K. Cheemplavam
2003-11-29 15:39 ` Prakash K. Cheemplavam
2003-11-29 16:38 ` Julien Oster
2003-11-29 16:54 ` Jeff Garzik
2003-11-29 17:07 ` Craig Bradney
2003-11-30 1:51 ` Prakash K. Cheemplavam
2003-11-29 16:56 ` Jeff Garzik
2003-11-29 17:41 ` Miquel van Smoorenburg
2003-11-29 18:39 ` Jeff Garzik
2003-11-29 20:24 ` Marcus Hartig
2003-11-30 2:00 ` Prakash K. Cheemplavam
2003-11-30 14:47 ` Bartlomiej Zolnierkiewicz
2003-11-30 15:52 ` Prakash K. Cheemplavam
2003-11-30 16:21 ` Bartlomiej Zolnierkiewicz
2003-11-30 16:25 ` Jens Axboe
2003-11-30 16:41 ` Jeff Garzik
2003-11-30 16:51 ` Jens Axboe
2003-11-30 16:58 ` Bartlomiej Zolnierkiewicz
2003-11-30 17:06 ` Jeff Garzik
2003-11-30 17:10 ` Jens Axboe
2003-11-30 17:22 ` Jeff Garzik
2003-11-30 17:31 ` Jens Axboe
2003-11-30 17:48 ` Jeff Garzik
2003-11-30 17:56 ` Vojtech Pavlik
2003-11-30 18:17 ` Jens Axboe
2003-11-30 18:19 ` Jeff Garzik
2003-11-30 18:22 ` Jens Axboe
2003-11-30 18:31 ` Jeff Garzik
2003-11-30 19:44 ` Vojtech Pavlik
2003-11-30 21:05 ` Yaroslav Klyukin [this message]
2003-11-30 17:08 ` Jens Axboe
2003-11-30 17:13 ` Bartlomiej Zolnierkiewicz
2003-11-30 17:13 ` Jens Axboe
2003-11-30 17:18 ` Jeff Garzik
2003-11-30 17:28 ` Jens Axboe
2003-11-30 17:41 ` Jeff Garzik
2003-11-30 17:45 ` Jens Axboe
2003-11-30 17:57 ` Jeff Garzik
2003-11-30 18:21 ` Jens Axboe
2003-11-30 19:04 ` Jeff Garzik
2003-11-30 19:39 ` Jens Axboe
2003-11-30 20:35 ` Jeff Garzik
2003-12-01 9:02 ` Jens Axboe
2003-11-30 17:19 ` Prakash K. Cheemplavam
2003-11-30 18:07 ` Bartlomiej Zolnierkiewicz
2003-11-30 21:34 ` Prakash K. Cheemplavam
2003-11-30 16:27 ` Jeff Garzik
2003-11-30 16:34 ` Bartlomiej Zolnierkiewicz
[not found] <Pine.LNX.4.44.0311291453550.838-100000@coffee.psychology.mcmaster.ca>
2003-11-30 16:45 ` Jeff Garzik
2003-11-30 17:52 Luis Miguel García
2003-11-30 17:13 ` Craig Bradney
2003-11-30 18:27 ` Jeff Garzik
2003-11-30 18:41 Luis Miguel García
2003-11-30 21:15 ` Craig Bradney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3FCA5B8A.2020006@mail.ru \
--to=skintwin@mail.ru \
--cc=B.Zolnierkiewicz@elka.pw.edu.pl \
--cc=axboe@suse.de \
--cc=eric_mudama@Maxtor.com \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marcush@onlinehome.de \
--cc=prakashkc@gmx.de \
--cc=vojtech@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).