From: Benoit Boissinot <bboissin@gmail.com>
To: Dave Airlie <airlied@gmail.com>
Cc: Andrew Morton <akpm@osdl.org>, Mike Werner <werner@sgi.com>,
linux-kernel@vger.kernel.org
Subject: Re: 2.6.10-mm2
Date: Sat, 8 Jan 2005 13:27:00 +0100 [thread overview]
Message-ID: <40f323d00501080427f881c68@mail.gmail.com> (raw)
In-Reply-To: <21d7e99705010718435695f837@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 1139 bytes --]
On Sat, 8 Jan 2005 13:43:48 +1100, Dave Airlie <airlied@gmail.com> wrote:
> > When i launch neverball (3d games), X get killed and I have the
> > following error in dmesg (3d card 9200SE, xserver : Xorg) :
> >
> > [drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
> >
> > [drm:drm_unlock] *ERROR* Process 10657 using kernel context 0
> >
>
> this looks like the agp backend isn't loading, Mike sent me parts of
> your .config but I lost the mail (don't drink and read e-mail...)
>
if you look at the .config, agp and agp_via are not build as modules.
> make sure that the correct backend for your chipset is loaded (throw a
> complete dmesg my way if you could.... I broke with tradition and
> actually tested -mm2 on my own machine there now and I have a Radeon
> 9200 on an intel agp ...
>
from dmesg, it looks like agp is correctly loaded.
> Dave.
>
Actually the error I reported first occurs when X starts, it happens a
second time when I launch neverball (and X get killed).
I attached a dmesg from right after X started, another after neverball
was launched.
output of lsmod and .config are attached to.
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: lsmod.log --]
[-- Type: text/x-log; name="lsmod.log", Size: 809 bytes --]
Module Size Used by
radeon 67008 0
drm 54548 1 radeon
snd_seq 44688 0
snd_via82xx 20960 0
snd_ac97_codec 67936 1 snd_via82xx
snd_pcm 75400 2 snd_via82xx,snd_ac97_codec
snd_timer 19524 2 snd_seq,snd_pcm
snd_page_alloc 7556 2 snd_via82xx,snd_pcm
snd_mpu401_uart 5760 1 snd_via82xx
snd_rawmidi 17344 1 snd_mpu401_uart
snd_seq_device 6988 2 snd_seq,snd_rawmidi
snd 40056 8 snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 6880 1 snd
ide_cd 36164 0
cdrom 35424 1 ide_cd
sk98lin 157088 0
[-- Attachment #3: dmesg-after-x-launch --]
[-- Type: application/octet-stream, Size: 12255 bytes --]
Linux version 2.6.10-mm2-arakou (tonfa@arakou) (gcc version 3.3.5 (Gentoo Linux 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7)) #11 Fri Jan 7 19:35:05 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262140
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32764 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f62a0
ACPI: RSDT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x3fffc000
ACPI: FADT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x3fffc0b2
ACPI: BOOT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x3fffc030
ACPI: MADT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x3fffc058
ACPI: DSDT (v001 ASUS A7V600 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
Kernel command line: root=/dev/hda6 video=vesa:mtrr vga=0x317
CPU 0 irqstacks, hard=c03c3000 soft=c03c2000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1822.659 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1035824k/1048560k available (1810k kernel code, 12124k reserved, 810k data, 176k init, 131056k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3588.09 BogoMIPS (lpj=1794048)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(TM) XP 2500+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041203
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Via IRQ fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
Initializing Cryptographic API
vesafb: framebuffer at 0xe8000000, mapped to 0xf8880000, using 3072k, total 131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=84
vesafb: protected mode interface info at c000:56f5
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: AGP aperture is 128M @ 0xf0000000
ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1
ACPI: PS/2 Mouse Controller [PS2M] at irq 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
ACPI: Floppy Controller [FDC0] at I/O 0x3f2-0x3f5, 0x3f7 irq 6 dma channel 2
elevator: using anticipatory as default io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0x9400-0x9407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x9408-0x940f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6Y120P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: JLMS XJ-HD166S, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
hda: cache flushes supported
hda: hda1 hda2 hda4 < hda5 hda6 hda7 >
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
PCI0 PCI1 USB0 USB1 USB2 USB3 SU20 MC97
ACPI: (supports S0 S1 S3 S4 S5)
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 176k freed
Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 177
eth0: 3Com Gigabit LOM (3C940)
PrefPort:A RlmtMode:Check Link State
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
EXT2-fs warning (device hda1): ext2_fill_super: mounting ext3 filesystem as ext2
ReiserFS: hda7: found reiserfs format "3.6" with standard journal
ReiserFS: hda7: using ordered data mode
ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda7: checking transaction log (hda7)
ReiserFS: hda7: Using r5 hash to sort names
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
ReiserFS: hda5: using ordered data mode
ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: Using r5 hash to sort names
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:11.5 to 64
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: none
irq moderation: disabled
scatter-gather: enabled
[drm] Initialized drm 1.0.0 20040925
radeon: Unknown parameter `drm_debug'
[drm:drm_init]
[drm:drm_probe]
[drm:drm_probe] assigning minor 0
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
[drm:drm_ctxbitmap_next] drm_ctxbitmap_next bit : 0
[drm:drm_ctxbitmap_init] drm_ctxbitmap_init : 0
[drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 SE]
[drm:drm_probe] new minor assigned 0
[drm:drm_stub_open]
[drm:drm_open_helper] pid = 10587, minor = 0
[drm:drm_setup]
[drm:drm_ioctl] pid=10587, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10587, cmd=0xc0086401, nr=0x01, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10587, cmd=0xc0086401, nr=0x01, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10587, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10587, cmd=0xc0186415, nr=0x15, dev 0xe200, auth=1
[drm:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:drm_addmap] 8192 13 f8f50000
[drm:drm_mmap] start = 0xafc90000, end = 0xafc92000, offset = 0xf8f50000
[drm:drm_vm_open] 0xafc90000,0x00002000
[drm:drm_do_vm_shm_nopage] shm_nopage 0xafc90000
[drm:drm_do_vm_shm_nopage] shm_nopage 0xafc91000
[drm:drm_ioctl] pid=10587, cmd=0xc0186415, nr=0x15, dev 0xe200, auth=1
[drm:drm_addmap] offset = 0xe8000000, size = 0x08000000, type = 0
[drm:drm_ioctl] pid=10587, cmd=0xc0086426, nr=0x26, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10587, cmd=0xc0086426, nr=0x26, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10587, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10587, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10587, cmd=0x6430, nr=0x30, dev 0xe200, auth=1
[drm:drm_ioctl] ret = ffffffed
[drm:drm_ioctl] pid=10587, cmd=0x40546440, nr=0x40, dev 0xe200, auth=1
[drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
[drm:drm_ioctl] ret = ffffffea
[drm:drm_ioctl] pid=10587, cmd=0xc0086426, nr=0x26, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10587, cmd=0xc0086426, nr=0x26, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10587, cmd=0x4008642b, nr=0x2b, dev 0xe200, auth=1
[drm:drm_unlock] *ERROR* Process 10587 using kernel context 0
[drm:drm_ioctl] ret = ffffffea
[drm:drm_vm_shm_close] 0xafc90000,0x00002000
[drm:drm_release] open_count = 1
[drm:drm_release] pid = 10587, device = 0xe200, open_count = 1
[drm:drm_fasync] fd = -1, device = 0xe200
[drm:drm_takedown]
[drm:drm_takedown] mtrr_del=1
[-- Attachment #4: dmesg-after-neverball-launch --]
[-- Type: application/octet-stream, Size: 14999 bytes --]
Linux version 2.6.10-mm2-arakou (tonfa@arakou) (gcc version 3.3.5 (Gentoo Linux 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7)) #11 Fri Jan 7 19:35:05 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262140
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32764 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f62a0
ACPI: RSDT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x3fffc000
ACPI: FADT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x3fffc0b2
ACPI: BOOT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x3fffc030
ACPI: MADT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x3fffc058
ACPI: DSDT (v001 ASUS A7V600 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
Kernel command line: root=/dev/hda6 video=vesa:mtrr vga=0x317
CPU 0 irqstacks, hard=c03c3000 soft=c03c2000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1822.659 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1035824k/1048560k available (1810k kernel code, 12124k reserved, 810k data, 176k init, 131056k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3588.09 BogoMIPS (lpj=1794048)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(TM) XP 2500+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041203
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Via IRQ fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
Initializing Cryptographic API
vesafb: framebuffer at 0xe8000000, mapped to 0xf8880000, using 3072k, total 131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=84
vesafb: protected mode interface info at c000:56f5
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: AGP aperture is 128M @ 0xf0000000
ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1
ACPI: PS/2 Mouse Controller [PS2M] at irq 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
ACPI: Floppy Controller [FDC0] at I/O 0x3f2-0x3f5, 0x3f7 irq 6 dma channel 2
elevator: using anticipatory as default io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0x9400-0x9407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x9408-0x940f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6Y120P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: JLMS XJ-HD166S, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
hda: cache flushes supported
hda: hda1 hda2 hda4 < hda5 hda6 hda7 >
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
PCI0 PCI1 USB0 USB1 USB2 USB3 SU20 MC97
ACPI: (supports S0 S1 S3 S4 S5)
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 176k freed
Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 177
eth0: 3Com Gigabit LOM (3C940)
PrefPort:A RlmtMode:Check Link State
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
EXT2-fs warning (device hda1): ext2_fill_super: mounting ext3 filesystem as ext2
ReiserFS: hda7: found reiserfs format "3.6" with standard journal
ReiserFS: hda7: using ordered data mode
ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda7: checking transaction log (hda7)
ReiserFS: hda7: Using r5 hash to sort names
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
ReiserFS: hda5: using ordered data mode
ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: Using r5 hash to sort names
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:11.5 to 64
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: none
irq moderation: disabled
scatter-gather: enabled
[drm] Initialized drm 1.0.0 20040925
radeon: Unknown parameter `drm_debug'
[drm:drm_init]
[drm:drm_probe]
[drm:drm_probe] assigning minor 0
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
[drm:drm_ctxbitmap_next] drm_ctxbitmap_next bit : 0
[drm:drm_ctxbitmap_init] drm_ctxbitmap_init : 0
[drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 SE]
[drm:drm_probe] new minor assigned 0
[drm:drm_stub_open]
[drm:drm_open_helper] pid = 10587, minor = 0
[drm:drm_setup]
[drm:drm_ioctl] pid=10587, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10587, cmd=0xc0086401, nr=0x01, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10587, cmd=0xc0086401, nr=0x01, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10587, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10587, cmd=0xc0186415, nr=0x15, dev 0xe200, auth=1
[drm:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:drm_addmap] 8192 13 f8f50000
[drm:drm_mmap] start = 0xafc90000, end = 0xafc92000, offset = 0xf8f50000
[drm:drm_vm_open] 0xafc90000,0x00002000
[drm:drm_do_vm_shm_nopage] shm_nopage 0xafc90000
[drm:drm_do_vm_shm_nopage] shm_nopage 0xafc91000
[drm:drm_ioctl] pid=10587, cmd=0xc0186415, nr=0x15, dev 0xe200, auth=1
[drm:drm_addmap] offset = 0xe8000000, size = 0x08000000, type = 0
[drm:drm_ioctl] pid=10587, cmd=0xc0086426, nr=0x26, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10587, cmd=0xc0086426, nr=0x26, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10587, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10587, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10587, cmd=0x6430, nr=0x30, dev 0xe200, auth=1
[drm:drm_ioctl] ret = ffffffed
[drm:drm_ioctl] pid=10587, cmd=0x40546440, nr=0x40, dev 0xe200, auth=1
[drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
[drm:drm_ioctl] ret = ffffffea
[drm:drm_ioctl] pid=10587, cmd=0xc0086426, nr=0x26, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10587, cmd=0xc0086426, nr=0x26, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10587, cmd=0x4008642b, nr=0x2b, dev 0xe200, auth=1
[drm:drm_unlock] *ERROR* Process 10587 using kernel context 0
[drm:drm_ioctl] ret = ffffffea
[drm:drm_vm_shm_close] 0xafc90000,0x00002000
[drm:drm_release] open_count = 1
[drm:drm_release] pid = 10587, device = 0xe200, open_count = 1
[drm:drm_fasync] fd = -1, device = 0xe200
[drm:drm_takedown]
[drm:drm_takedown] mtrr_del=1
[drm:drm_stub_open]
[drm:drm_open_helper] pid = 10826, minor = 0
[drm:drm_setup]
[drm:drm_ioctl] pid=10826, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10826, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1
[drm:drm_release] open_count = 1
[drm:drm_release] pid = 10826, device = 0xe200, open_count = 1
[drm:drm_fasync] fd = -1, device = 0xe200
[drm:drm_takedown]
[drm:drm_stub_open]
[drm:drm_open_helper] pid = 10826, minor = 0
[drm:drm_setup]
[drm:drm_ioctl] pid=10826, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10826, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1
[drm:drm_release] open_count = 1
[drm:drm_release] pid = 10826, device = 0xe200, open_count = 1
[drm:drm_fasync] fd = -1, device = 0xe200
[drm:drm_takedown]
[drm:drm_stub_open]
[drm:drm_open_helper] pid = 10826, minor = 0
[drm:drm_setup]
[drm:drm_ioctl] pid=10826, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10826, cmd=0xc0086401, nr=0x01, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10826, cmd=0xc0086401, nr=0x01, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10826, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10826, cmd=0xc0186415, nr=0x15, dev 0xe200, auth=1
[drm:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:drm_addmap] 8192 13 f8f50000
[drm:drm_mmap] start = 0xafc90000, end = 0xafc92000, offset = 0xf8f50000
[drm:drm_vm_open] 0xafc90000,0x00002000
[drm:drm_do_vm_shm_nopage] shm_nopage 0xafc90000
[drm:drm_do_vm_shm_nopage] shm_nopage 0xafc91000
[drm:drm_ioctl] pid=10826, cmd=0xc0186415, nr=0x15, dev 0xe200, auth=1
[drm:drm_addmap] offset = 0xe8000000, size = 0x08000000, type = 0
[drm:drm_ioctl] pid=10826, cmd=0xc0086426, nr=0x26, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10826, cmd=0xc0086426, nr=0x26, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10826, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10826, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10826, cmd=0x6430, nr=0x30, dev 0xe200, auth=1
[drm:drm_ioctl] ret = ffffffed
[drm:drm_ioctl] pid=10826, cmd=0x40546440, nr=0x40, dev 0xe200, auth=1
[drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
[drm:drm_ioctl] ret = ffffffea
[drm:drm_ioctl] pid=10826, cmd=0xc0086426, nr=0x26, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10826, cmd=0xc0086426, nr=0x26, dev 0xe200, auth=1
[drm:drm_ioctl] pid=10826, cmd=0x4008642b, nr=0x2b, dev 0xe200, auth=1
[drm:drm_unlock] *ERROR* Process 10826 using kernel context 0
[drm:drm_ioctl] ret = ffffffea
[drm:drm_vm_shm_close] 0xafc90000,0x00002000
[drm:drm_release] open_count = 1
[drm:drm_release] pid = 10826, device = 0xe200, open_count = 1
[drm:drm_fasync] fd = -1, device = 0xe200
[drm:drm_takedown]
[drm:drm_takedown] mtrr_del=1
[-- Attachment #5: config.gz --]
[-- Type: application/gzip, Size: 7844 bytes --]
next prev parent reply other threads:[~2005-01-08 12:28 UTC|newest]
Thread overview: 248+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-15 6:56 unregister_ioctl32_conversion and modules. ioctl32 revisited Andi Kleen
2004-12-15 7:46 ` Michael S. Tsirkin
2004-12-15 8:00 ` Andi Kleen
2004-12-15 8:21 ` Michael S. Tsirkin
2004-12-15 8:29 ` Andi Kleen
2004-12-15 11:42 ` Michael S. Tsirkin
2004-12-15 13:46 ` Arnd Bergmann
2004-12-15 16:12 ` Andi Kleen
2004-12-15 16:45 ` Arnd Bergmann
2004-12-15 16:57 ` Andi Kleen
2004-12-15 17:47 ` Arnd Bergmann
2004-12-15 17:59 ` Andi Kleen
2004-12-15 18:21 ` Michael S. Tsirkin
2004-12-16 4:06 ` Andi Kleen
2004-12-26 22:26 ` Chris Wedgwood
2004-12-26 22:49 ` [discuss] " Arnd Bergmann
2004-12-27 11:49 ` [discuss] Re: unregister_ioctl32_conversion and modules. ioct l32 revisited Michael S. Tsirkin
2005-01-05 15:25 ` Michael S. Tsirkin
2005-01-05 16:07 ` Arnd Bergmann
2004-12-15 18:20 ` unregister_ioctl32_conversion and modules. ioctl32 revisited Takashi Iwai
2004-12-15 18:30 ` Lee Revell
2004-12-15 19:34 ` Michael S. Tsirkin
2004-12-16 5:03 ` [discuss] " Andi Kleen
2004-12-16 7:53 ` Ingo Molnar
2004-12-16 8:09 ` Andi Kleen
2004-12-16 8:25 ` Andrew Morton
2004-12-16 8:30 ` Michael S. Tsirkin
2004-12-16 8:38 ` Andi Kleen
2004-12-17 1:43 ` [PATCH] " Michael S. Tsirkin
2004-12-16 16:08 ` Christoph Hellwig
2005-01-03 9:11 ` 2.6.10-mm1 Andrew Morton
2005-01-03 10:07 ` 2.6.10-mm1 Christoph Hellwig
2005-01-03 17:19 ` 2.6.10-mm1 Jesse Barnes
2005-01-03 23:29 ` 2.6.10-mm1 [failure on AMD64] Rafael J. Wysocki
2005-01-03 23:30 ` Jesse Barnes
2005-01-04 11:23 ` Thomas Molina
2005-01-04 13:22 ` Rafael J. Wysocki
2005-01-04 12:22 ` Andi Kleen
2005-01-04 21:05 ` Rafael J. Wysocki
2005-01-06 11:32 ` 2.6.10-mm1 Christoph Hellwig
2005-01-06 13:04 ` 2.6.10-mm1 David Howells
2005-01-06 13:06 ` 2.6.10-mm1 Christoph Hellwig
2005-01-03 10:25 ` 2.6.10-mm1 Christoph Hellwig
2005-01-03 13:21 ` 2.6.10-mm1 Christoph Hellwig
2005-01-03 13:35 ` 2.6.10-mm1 Michael S. Tsirkin
2005-01-03 11:48 ` 2.6.10-mm1 Christoph Hellwig
2005-01-05 17:27 ` 2.6.10-mm1 Hans Reiser
2005-01-06 13:52 ` 2.6.10-mm1 Vladimir Saveliev
2005-01-07 14:46 ` 2.6.10-mm1 Christoph Hellwig
2005-01-07 17:16 ` [RFC] per thread page reservation patch Vladimir Saveliev
2005-01-07 18:48 ` Andrew Morton
2005-01-07 20:21 ` Nikita Danilov
2005-01-07 19:05 ` Christoph Hellwig
2005-01-07 19:12 ` Christoph Hellwig
2005-01-07 19:21 ` Robert Love
2005-01-07 20:48 ` Nikita Danilov
2005-01-07 20:54 ` Christoph Hellwig
2005-01-07 21:00 ` Nikita Danilov
2005-01-07 21:07 ` Christoph Hellwig
2005-01-07 19:14 ` Paulo Marques
2005-01-07 19:32 ` Christoph Hellwig
2005-01-07 19:42 ` Andi Kleen
2005-01-07 20:55 ` Nikita Danilov
2005-01-07 21:24 ` Andrew Morton
2005-01-07 21:24 ` Andi Kleen
2005-01-07 22:12 ` Nikita Danilov
2005-01-07 23:03 ` Andrew Morton
2005-01-07 23:17 ` Nikita Danilov
2005-01-07 23:43 ` Andrew Morton
2005-01-08 12:44 ` Nikita Danilov
2005-01-08 13:43 ` Hugh Dickins
2005-01-09 11:35 ` Marcelo Tosatti
2005-01-09 18:16 ` Nikita Danilov
2005-01-25 16:39 ` reiser4 core patches: [Was: [RFC] per thread page reservation patch] Vladimir Saveliev
2005-01-27 10:37 ` Adrian Bunk
2005-01-27 11:01 ` Christoph Hellwig
2005-01-03 11:51 ` 2.6.10-mm1 Christoph Hellwig
2005-01-04 9:04 ` 2.6.10-mm1 Ingo Molnar
2005-01-04 9:26 ` 2.6.10-mm1 Christoph Hellwig
2005-01-04 9:33 ` 2.6.10-mm1 Ingo Molnar
2005-01-03 15:13 ` 2.6.10-mm1 William Lee Irwin III
2005-01-03 17:17 ` 2.6.10-mm1 Jesse Barnes
2005-01-05 22:38 ` 2.6.10-mm1 Matthew Dobson
2005-01-03 20:42 ` [PATCH] pktcdvd: make two functions static Peter Osterlund
2005-01-03 20:45 ` [PATCH] pktcdvd: grep-friendly function prototypes Peter Osterlund
2005-01-03 20:47 ` [PATCH] pktcdvd: Small documentation update Peter Osterlund
2005-01-03 20:53 ` [PATCH] isofs: Remove useless include Peter Osterlund
2005-01-03 20:58 ` [PATCH] synaptics: Remove unused struct member variable Peter Osterlund
2005-01-03 22:25 ` [PATCH] pktcdvd: make two functions static Bartlomiej Zolnierkiewicz
2005-01-04 9:08 ` 2.6.10-mm1 Ingo Molnar
2005-01-05 14:40 ` [PATCH] deprecate (un)register_ioctl32_conversion Michael S. Tsirkin
2005-01-05 14:46 ` Christoph Hellwig
2005-01-05 15:03 ` Michael S. Tsirkin
2005-01-05 15:11 ` Christoph Hellwig
2005-01-05 21:33 ` Andrew Morton
2005-01-06 14:41 ` Michael S. Tsirkin
2005-01-06 14:55 ` Christoph Hellwig
2005-01-06 15:22 ` Michael S. Tsirkin
2005-01-06 15:30 ` Christoph Hellwig
2005-01-06 15:56 ` Michael S. Tsirkin
2005-01-05 15:19 ` Andi Kleen
2005-01-05 15:55 ` Christoph Hellwig
2005-01-05 18:23 ` Takashi Iwai
2005-01-05 21:34 ` Andrew Morton
2005-01-06 8:22 ` 2.6.10-mm2 Andrew Morton
2005-01-06 8:39 ` 2.6.10-mm2 Nick Piggin
2005-01-06 9:11 ` 2.6.10-mm2 Eyal Lebedinsky
2005-01-06 9:24 ` 2.6.10-mm2 Andrew Morton
2005-01-06 9:27 ` 2.6.10-mm2 Christoph Hellwig
2005-01-06 10:17 ` 2.6.10-mm2 Juri Prokofjev
2005-01-06 14:54 ` 2.6.10-mm2 Dave Airlie
2005-01-06 10:17 ` [PATCH 2.6.10-mm2] m32r: build fix Hirokazu Takata
2005-01-06 10:47 ` 2.6.10-mm2 Christoph Hellwig
2005-01-06 11:19 ` 2.6.10-mm2 error: redefinition of `struct cfq_io_context' Helge Hafting
2005-01-06 14:21 ` Helge Hafting
2005-01-06 12:06 ` 2.6.10-mm2 Marcos D. Marado Torres
2005-01-11 14:08 ` acpi_power_off on 2.6.10-mm3 WAS: 2.6.10-mm2 Marcos D. Marado Torres
2005-01-06 12:48 ` 2.6.10-mm2 Sam Ravnborg
2005-01-06 18:15 ` 2.6.10-mm2 Felipe Alfaro Solana
2005-01-06 14:51 ` [PATCH] fget_light/fput_light for ioctls Michael S. Tsirkin
2005-01-06 16:18 ` [PATCH] fget_light/fput_light for ioctls (fixed) Michael S. Tsirkin
2005-01-06 15:00 ` [patch] 2.6.10-mm2: remove umsdos MAINTAINERS entry Adrian Bunk
2005-01-06 15:03 ` [patch] 2.6.10-mm2: fix MTD_BLOCK2MTD dependency Adrian Bunk
2005-01-08 20:18 ` Jörn Engel
2005-01-06 17:11 ` 2.6.10-mm2 Alexander Gran
2005-01-06 17:55 ` 2.6.10-mm2 Diego Calleja
2005-01-06 18:17 ` 2.6.10-mm2 Marc Ballarin
2005-01-06 17:48 ` 2.6.10-mm2: swsusp regression Rafael J. Wysocki
2005-01-06 22:52 ` Pavel Machek
2005-01-06 23:41 ` Rafael J. Wysocki
2005-01-06 23:48 ` Pavel Machek
2005-01-07 0:24 ` Nigel Cunningham
2005-01-07 0:29 ` Pavel Machek
2005-01-07 0:45 ` Nigel Cunningham
2005-01-07 12:45 ` Rafael J. Wysocki
2005-01-07 22:12 ` Nigel Cunningham
2005-01-08 0:56 ` Rafael J. Wysocki
2005-01-08 9:49 ` 2.6.10-mm2: swsusp regression [update] Rafael J. Wysocki
2005-01-08 9:56 ` Nigel Cunningham
2005-01-08 13:19 ` Pavel Machek
2005-01-08 15:10 ` Rafael J. Wysocki
2005-01-08 15:44 ` Pavel Machek
2005-01-12 18:51 ` Rafael J. Wysocki
2005-01-12 21:01 ` Pavel Machek
2005-01-12 22:44 ` Rafael J. Wysocki
2005-01-12 22:46 ` Pavel Machek
2005-01-12 22:58 ` Nigel Cunningham
2005-01-12 23:02 ` Rafael J. Wysocki
2005-01-12 23:28 ` Nigel Cunningham
2005-01-13 0:59 ` [PATCH] Fix a bug in timer_suspend() on x86_64 Rafael J. Wysocki
2005-01-13 10:08 ` Pavel Machek
2005-01-13 10:14 ` Nigel Cunningham
2005-01-13 19:47 ` Andi Kleen
2005-01-08 17:22 ` 2.6.10-mm2: swsusp regression [update] Barry K. Nathan
2005-01-06 17:57 ` [patch] 2.6.10-mm2: move CPUSETS above EMBEDDED Adrian Bunk
2005-01-07 6:20 ` Paul Jackson
2005-01-06 18:15 ` [2.6 patch] 2.6.10-mm2: let I2C_ALGO_SGI depend on MIPS Adrian Bunk
[not found] ` <20050106192701.GA13955@linux-mips.org>
2005-01-06 19:35 ` Ilya A. Volynets-Evenbakh
2005-01-06 19:46 ` Greg KH
2005-01-07 9:12 ` Ladislav Michl
2005-01-07 19:14 ` Greg KH
2005-01-06 20:30 ` 2.6.10-mm2 Ramón Rey Vicente
2005-01-07 9:39 ` 2.6.10-mm2 Benoit Boissinot
2005-01-07 13:13 ` 2.6.10-mm2 Brice Goglin
2005-01-09 1:26 ` 2.6.10-mm2 Dave Airlie
2005-01-09 8:55 ` 2.6.10-mm2 Brice Goglin
2005-01-08 2:43 ` 2.6.10-mm2 Dave Airlie
2005-01-08 12:27 ` Benoit Boissinot [this message]
2005-01-08 13:42 ` 2.6.10-mm2 Dave Airlie
2005-01-08 14:18 ` 2.6.10-mm2 Marc Ballarin
2005-01-09 1:23 ` 2.6.10-mm2 Dave Airlie
2005-01-08 16:46 ` 2.6.10-mm2 Mike Werner
2005-01-08 13:48 ` 2.6.10-mm2 Dave Airlie
2005-01-08 15:41 ` 2.6.10-mm2 Benoit Boissinot
2005-01-09 1:38 ` 2.6.10-mm2 Dave Airlie
2005-01-09 14:09 ` 2.6.10-mm2 Benoit Boissinot
2005-01-09 14:15 ` 2.6.10-mm2 Brice Goglin
2005-01-10 7:40 ` 2.6.10-mm2 Dave Airlie
2005-01-10 7:49 ` 2.6.10-mm2 Brice Goglin
[not found] ` <21d7e9970501100101353cf602@mail.gmail.com>
2005-01-10 10:14 ` 2.6.10-mm2 solved Brice Goglin
2005-01-10 16:41 ` Brice Goglin
2005-01-08 1:31 ` AGP Oops (was Re: 2.6.10-mm2) Sean Neakums
2005-01-08 1:36 ` Andrew Morton
2005-01-08 13:01 ` Sean Neakums
2005-01-06 14:06 ` [PATCH] macros to detect existance of unlocked_ioctl and ioctl_compat Michael S. Tsirkin
2005-01-06 14:53 ` Christoph Hellwig
2005-01-06 15:09 ` Andi Kleen
2005-01-06 15:14 ` Christoph Hellwig
2005-01-06 15:22 ` Lee Revell
2005-01-06 15:31 ` Christoph Hellwig
2005-01-06 15:38 ` Lee Revell
2005-01-06 19:03 ` Catalin Marinas
2005-01-06 15:37 ` Andi Kleen
2005-01-06 16:58 ` Petr Vandrovec
2005-01-06 16:35 ` Petr Vandrovec
2005-01-06 16:39 ` Christoph Hellwig
2005-01-06 16:57 ` Andi Kleen
2005-01-06 17:26 ` Petr Vandrovec
2005-01-06 17:53 ` Andi Kleen
2005-01-06 18:19 ` Petr Vandrovec
2005-01-06 19:35 ` Greg KH
2005-01-06 19:51 ` Andi Kleen
2005-01-06 19:59 ` David S. Miller
2005-01-06 20:44 ` Andi Kleen
2005-01-06 21:09 ` Petr Vandrovec
2005-01-06 21:24 ` Greg KH
2005-01-06 21:59 ` [linux-usb-devel] " David Brownell
2005-01-06 22:48 ` Greg KH
2005-01-07 11:49 ` [discuss] " Arnd Bergmann
2005-01-07 12:30 ` Andi Kleen
2005-01-06 22:34 ` Pavel Machek
2005-01-12 20:36 ` [PATCH] fix: macros to detect existance of unlocked_ioctl and compat_ioctl Michael S. Tsirkin
2005-01-12 21:29 ` Greg KH
2005-01-12 21:43 ` Andi Kleen
2005-01-12 22:52 ` Greg KH
2005-01-12 23:10 ` Andrew Morton
2005-01-12 23:16 ` Greg KH
2005-01-16 5:38 ` Werner Almesberger
2005-01-20 5:38 ` 2.6.11-rc1-mm2 Andrew Morton
2005-01-20 6:53 ` 2.6.11-rc1-mm2: CONFIG_SMP=n compile error Adrian Bunk
2005-01-20 7:12 ` Andrew Morton
2005-01-20 17:44 ` Rafael J. Wysocki
2005-01-20 9:57 ` 2.6.11-rc1-mm2 Steffen Klassert
2005-01-20 10:39 ` 2.6.11-rc1-mm2 Christoph Hellwig
2005-01-20 11:40 ` 2.6.11-rc1-mm2 Benoit Boissinot
2005-01-20 11:49 ` 2.6.11-rc1-mm2 Benoit Boissinot
2005-01-20 11:58 ` 2.6.11-rc1-mm2 Christoph Hellwig
2005-01-21 0:09 ` security hook missing in compat ioctl in 2.6.11-rc1-mm2 Michael S. Tsirkin
2005-01-21 0:10 ` Chris Wright
2005-01-21 1:26 ` [PATCH] compat ioctl security hook fixup Chris Wright
2005-01-21 4:19 ` Andi Kleen
2005-01-21 5:51 ` Chris Wright
2005-01-21 6:11 ` Andi Kleen
2005-01-21 6:35 ` [PATCH] compat ioctl security hook fixup (take2) Chris Wright
2005-01-21 8:06 ` 2.6.11-rc1-mm2 Con Kolivas
2005-01-21 8:30 ` 2.6.11-rc1-mm2 Andrew Morton
2005-01-21 8:34 ` 2.6.11-rc1-mm2 Andrew Morton
2005-01-21 8:37 ` 2.6.11-rc1-mm2 Con Kolivas
2005-01-21 12:48 ` 2.6.11-rc1-mm2 Adrian Bunk
2005-01-21 22:29 ` 2.6.11-rc1-mm2 Con Kolivas
2005-01-21 22:43 ` [PATCH] sched: account rt_tasks as iso_ticks Con Kolivas
2005-02-01 0:34 ` 2.6.11-rc1-mm2 Ed Tomlinson
2005-02-03 16:36 ` 2.6.11-rc1-mm2 Alexander Nyberg
2005-01-12 22:13 ` [PATCH] fix: macros to detect existance of unlocked_ioctl and compat_ioctl Andreas Dilger
2005-01-12 22:58 ` Greg KH
2005-01-13 10:57 ` Takashi Iwai
2005-01-06 18:47 2.6.10-mm2 Mike Werner
2005-01-07 11:42 ` 2.6.10-mm2 Ramón Rey Vicente
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40f323d00501080427f881c68@mail.gmail.com \
--to=bboissin@gmail.com \
--cc=airlied@gmail.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=werner@sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).