linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: Christoffer Dall <christoffer.dall@arm.com>,
	Peter Maydell <peter.maydell@linaro.org>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>,
	"Heinrich Schuchardt" <xypron.glpk@gmx.de>,
	"lkml - Kernel Mailing List" <linux-kernel@vger.kernel.org>,
	"Stefan Hajnoczi" <stefanha@redhat.com>,
	kvmarm@lists.cs.columbia.edu,
	arm-mail-list <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 1/1] KVM: inject data abort if instruction cannot be decoded
Date: Thu, 5 Sep 2019 14:09:18 +0100	[thread overview]
Message-ID: <4b6662bd-56e4-3c10-3b65-7c90828a22f9@kernel.org> (raw)
In-Reply-To: <20190905092223.GC4320@e113682-lin.lund.arm.com>

On 05/09/2019 10:22, Christoffer Dall wrote:
> On Thu, Sep 05, 2019 at 09:56:44AM +0100, Peter Maydell wrote:
>> On Thu, 5 Sep 2019 at 09:52, Marc Zyngier <maz@kernel.org> wrote:
>>>
>>> On Thu, 05 Sep 2019 09:16:54 +0100,
>>> Peter Maydell <peter.maydell@linaro.org> wrote:
>>>> This is true, but the problem is that barfing out to userspace
>>>> makes it harder to debug the guest because it means that
>>>> the VM is immediately destroyed, whereas AIUI if we
>>>> inject some kind of exception then (assuming you're set up
>>>> to do kernel-debug via gdbstub) you can actually examine
>>>> the offending guest code with a debugger because at least
>>>> your VM is still around to inspect...
>>>
>>> To Christoffer's point, I find the benefit a bit dubious. Yes, you get
>>> an exception, but the instruction that caused it may be completely
>>> legal (store with post-increment, for example), leading to an even
>>> more puzzled developer (that exception should never have been
>>> delivered the first place).
>>
>> Right, but the combination of "host kernel prints a message
>> about an unsupported load/store insn" and "within-guest debug
>> dump/stack trace/etc" is much more useful than just having
>> "host kernel prints message" and "QEMU exits"; and it requires
>> about 3 lines of code change...
>>
>>> I'm far more in favour of dumping the state of the access in the run
>>> structure (much like we do for a MMIO access) and let userspace do
>>> something about it (such as dumping information on the console or
>>> breaking). It could even inject an exception *if* the user has asked
>>> for it.
>>
>> ...whereas this requires agreement on a kernel-userspace API,
>> larger changes in the kernel, somebody to implement the userspace
>> side of things, and the user to update both the kernel and QEMU.
>> It's hard for me to see that the benefit here over the 3-line
>> approach really outweighs the extra effort needed. In practice
>> saying "we should do this" is saying "we're going to do nothing",
>> based on the historical record.
>>
> 
> How about something like the following (completely untested, liable for
> ABI discussions etc. etc., but for illustration purposes).
> 
> I think it raises the question (and likely many other) of whether we can
> break the existing 'ABI' and change behavior for missing ISV
> retrospectively for legacy user space when the issue has occurred?
>    
> Someone might have written code that reacts to the -ENOSYS, so I've
> taken the conservative approach for this for the time being.
> 
> 
> diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
> index 8a37c8e89777..19a92c49039c 100644
> --- a/arch/arm/include/asm/kvm_host.h
> +++ b/arch/arm/include/asm/kvm_host.h
> @@ -76,6 +76,14 @@ struct kvm_arch {
>  
>  	/* Mandated version of PSCI */
>  	u32 psci_version;
> +
> +	/*
> +	 * If we encounter a data abort without valid instruction syndrome
> +	 * information, report this to user space.  User space can (and
> +	 * should) opt in to this feature if KVM_CAP_ARM_NISV_TO_USER is
> +	 * supported.
> +	 */
> +	bool return_nisv_io_abort_to_user;
>  };
>  
>  #define KVM_NR_MEM_OBJS     40
> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> index f656169db8c3..019bc560edc1 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -83,6 +83,14 @@ struct kvm_arch {
>  
>  	/* Mandated version of PSCI */
>  	u32 psci_version;
> +
> +	/*
> +	 * If we encounter a data abort without valid instruction syndrome
> +	 * information, report this to user space.  User space can (and
> +	 * should) opt in to this feature if KVM_CAP_ARM_NISV_TO_USER is
> +	 * supported.
> +	 */
> +	bool return_nisv_io_abort_to_user;
>  };
>  
>  #define KVM_NR_MEM_OBJS     40
> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
> index 5e3f12d5359e..a4dd004d0db9 100644
> --- a/include/uapi/linux/kvm.h
> +++ b/include/uapi/linux/kvm.h
> @@ -235,6 +235,7 @@ struct kvm_hyperv_exit {
>  #define KVM_EXIT_S390_STSI        25
>  #define KVM_EXIT_IOAPIC_EOI       26
>  #define KVM_EXIT_HYPERV           27
> +#define KVM_EXIT_ARM_NISV         28
>  
>  /* For KVM_EXIT_INTERNAL_ERROR */
>  /* Emulate instruction failed. */
> @@ -996,6 +997,7 @@ struct kvm_ppc_resize_hpt {
>  #define KVM_CAP_ARM_PTRAUTH_ADDRESS 171
>  #define KVM_CAP_ARM_PTRAUTH_GENERIC 172
>  #define KVM_CAP_PMU_EVENT_FILTER 173
> +#define KVM_CAP_ARM_NISV_TO_USER 174
>  
>  #ifdef KVM_CAP_IRQ_ROUTING
>  
> diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c
> index 35a069815baf..2ce94bd9d4a9 100644
> --- a/virt/kvm/arm/arm.c
> +++ b/virt/kvm/arm/arm.c
> @@ -98,6 +98,26 @@ int kvm_arch_check_processor_compat(void)
>  	return 0;
>  }
>  
> +int kvm_vm_ioctl_enable_cap(struct kvm *kvm,
> +			    struct kvm_enable_cap *cap)
> +{
> +	int r;
> +
> +	if (cap->flags)
> +		return -EINVAL;
> +
> +	switch (cap->cap) {
> +	case KVM_CAP_ARM_NISV_TO_USER:
> +		r = 0;
> +		kvm->arch.return_nisv_io_abort_to_user = true;
> +		break;
> +	default:
> +		r = -EINVAL;
> +		break;
> +	}
> +
> +	return r;
> +}
>  
>  /**
>   * kvm_arch_init_vm - initializes a VM data structure
> @@ -196,6 +216,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
>  	case KVM_CAP_MP_STATE:
>  	case KVM_CAP_IMMEDIATE_EXIT:
>  	case KVM_CAP_VCPU_EVENTS:
> +	case KVM_CAP_ARM_NISV_TO_USER:
>  		r = 1;
>  		break;
>  	case KVM_CAP_ARM_SET_DEVICE_ADDR:
> @@ -673,6 +694,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
>  		ret = kvm_handle_mmio_return(vcpu, vcpu->run);
>  		if (ret)
>  			return ret;
> +	} else if (run->exit_reason == KVM_EXIT_ARM_NISV) {
> +		kvm_inject_undefined(vcpu);

Just to make sure I understand: Is the expectation here that userspace
could clear the exit reason if it managed to handle the exit? And
otherwise we'd inject an UNDEF on reentry?

>  	}
>  
>  	if (run->immediate_exit)
> diff --git a/virt/kvm/arm/mmio.c b/virt/kvm/arm/mmio.c
> index 6af5c91337f2..62e6ef47a6de 100644
> --- a/virt/kvm/arm/mmio.c
> +++ b/virt/kvm/arm/mmio.c
> @@ -167,8 +167,15 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run,
>  		if (ret)
>  			return ret;
>  	} else {
> -		kvm_err("load/store instruction decoding not implemented\n");
> -		return -ENOSYS;
> +		if (vcpu->kvm->arch.return_nisv_io_abort_to_user) {
> +			run->exit_reason = KVM_EXIT_ARM_NISV;
> +			run->mmio.phys_addr = fault_ipa;

We could also record whether that's a read or a write (WnR should still
be valid). Actually, we could store a sanitized version of the ESR.

> +			vcpu->stat.mmio_exit_user++;
> +			return 0;
> +		} else {
> +			kvm_info("encountered data abort without syndrome info\n");

My only issue with this is that the previous message has been sort of
documented...

Thanks,

	M.
-- 
Jazz is not dead, it just smells funny...

  reply	other threads:[~2019-09-05 13:09 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-04 18:07 [PATCH 1/1] KVM: inject data abort if instruction cannot be decoded Heinrich Schuchardt
2019-09-05  8:03 ` Marc Zyngier
2019-09-05  8:16   ` Peter Maydell
2019-09-05  8:25     ` Christoffer Dall
2019-09-05  8:32       ` Peter Maydell
2019-09-05  8:48     ` Heinrich Schuchardt
2019-09-05  8:52     ` Marc Zyngier
2019-09-05  8:56       ` Peter Maydell
2019-09-05  9:15         ` Marc Zyngier
2019-09-05  9:22         ` Christoffer Dall
2019-09-05 13:09           ` Marc Zyngier [this message]
2019-09-06  8:00             ` Christoffer Dall
2019-09-06 12:08               ` Alexander Graf
2019-09-06 12:34                 ` Marc Zyngier
2019-09-06 13:02                   ` [UNVERIFIED SENDER] " Alexander Graf
2019-09-06 13:12                 ` Christoffer Dall
2019-09-06 13:16                   ` Alexander Graf
2019-09-06 13:31                   ` Peter Maydell
2019-09-06 13:41                     ` Alexander Graf
2019-09-06 13:50                       ` Peter Maydell
2019-09-06 14:12                         ` Alexander Graf
2019-09-06 13:44                     ` Christoffer Dall
2019-09-05 13:25           ` Heinrich Schuchardt
2019-09-06  7:58             ` Christoffer Dall
2019-09-05  8:28   ` Heinrich Schuchardt
2019-09-05  9:11     ` Marc Zyngier
2019-09-05  9:20 ` Stefan Hajnoczi
2019-09-05  9:23   ` Daniel P. Berrangé
2019-09-05 12:01   ` Heinrich Schuchardt
2019-09-05 12:16     ` Christoffer Dall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4b6662bd-56e4-3c10-3b65-7c90828a22f9@kernel.org \
    --to=maz@kernel.org \
    --cc=berrange@redhat.com \
    --cc=christoffer.dall@arm.com \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peter.maydell@linaro.org \
    --cc=stefanha@redhat.com \
    --cc=xypron.glpk@gmx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).