From: Jacek Anaszewski <jacek.anaszewski@gmail.com>
To: Pavel Machek <pavel@ucw.cz>
Cc: "Vesa Jääskeläinen" <dachaac@gmail.com>,
"Dan Murphy" <dmurphy@ti.com>,
robh+dt@kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org
Subject: Re: [PATCH 2/2] leds: lp5024: Add the LP5024/18 RGB LED driver
Date: Sat, 5 Jan 2019 13:16:11 +0100 [thread overview]
Message-ID: <4cf79414-578e-eea7-4f46-fc8789206988@gmail.com> (raw)
In-Reply-To: <20190104220726.GA12395@amd>
Hi Pavel,
On 1/4/19 11:07 PM, Pavel Machek wrote:
> Hi!
>
>> But, aside from that hypothetic issue, we need a solution for
>> LEDn_BRIGHTNESS feature of lp5024, i.e. setting color intensity
>> via a single register write. How would you propose to address that?
>
> So they have hardware feature that allows control of 3 LEDs at the
> same time, right?
>
> Actually turris routers (IIRC) have similar feature, but shared for
> all their LEDs.
>
> I'd suggest simply ignoring that feature for now :-).
Why not use brightness file for that?
> We will need to solve RGB leds somehow, hopefully this is solved with
> it.
When? With this attitude we will procrastinate it forever.
It's been almost 3 years since first HSV patches.
I proposed rough design of LED RGB class interface in [0].
If you find it totally flawed, then please spot the problems.
If not, let's improve it and implement.
[0] https://lkml.org/lkml/2019/1/3/550
--
Best regards,
Jacek Anaszewski
next prev parent reply other threads:[~2019-01-05 12:16 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-19 16:26 [PATCH 0/2] LP5024/18 LED introduction Dan Murphy
2018-12-19 16:26 ` [PATCH 1/2] dt: bindings: lp5024: Introduce the lp5024 and lp5018 RGB driver Dan Murphy
2018-12-28 23:53 ` Rob Herring
2018-12-31 18:54 ` Dan Murphy
2019-01-08 20:33 ` Jacek Anaszewski
2019-01-08 20:53 ` Dan Murphy
2019-01-08 21:16 ` Jacek Anaszewski
2019-01-08 21:22 ` Dan Murphy
2019-01-09 20:12 ` Jacek Anaszewski
2019-01-09 21:12 ` Dan Murphy
2019-01-09 21:28 ` Jacek Anaszewski
2019-01-09 21:31 ` Dan Murphy
2019-01-10 18:44 ` Jacek Anaszewski
2019-01-10 19:22 ` Dan Murphy
2019-01-10 19:57 ` Jacek Anaszewski
2019-01-10 20:43 ` Dan Murphy
2019-01-10 22:03 ` Jacek Anaszewski
2019-01-10 23:51 ` Dan Murphy
2019-01-11 12:38 ` Dan Murphy
2019-01-11 21:52 ` Jacek Anaszewski
2019-01-12 17:09 ` Dan Murphy
2019-01-12 19:48 ` Jacek Anaszewski
2019-01-14 12:27 ` Dan Murphy
2019-01-14 20:11 ` Jacek Anaszewski
2019-01-14 20:14 ` Dan Murphy
2019-01-14 20:28 ` Jacek Anaszewski
2019-01-14 20:29 ` Dan Murphy
2018-12-19 16:26 ` [PATCH 2/2] leds: lp5024: Add the LP5024/18 RGB LED driver Dan Murphy
2018-12-19 19:04 ` Dan Murphy
2018-12-19 19:34 ` Pavel Machek
2018-12-19 19:41 ` Dan Murphy
2018-12-19 20:10 ` Pavel Machek
2018-12-19 20:41 ` Dan Murphy
2018-12-19 21:36 ` Jacek Anaszewski
2018-12-19 21:50 ` Dan Murphy
2018-12-20 12:40 ` Vesa Jääskeläinen
2018-12-20 13:56 ` Dan Murphy
2019-01-01 13:45 ` Vesa Jääskeläinen
2019-01-03 22:05 ` Jacek Anaszewski
2019-01-03 23:19 ` Vesa Jääskeläinen
2019-01-03 23:34 ` Pavel Machek
2019-01-04 19:49 ` Vesa Jääskeläinen
2019-01-04 20:43 ` Pavel Machek
2019-01-04 19:12 ` Jacek Anaszewski
2019-01-04 20:12 ` Pavel Machek
2019-01-04 21:37 ` Jacek Anaszewski
2019-01-04 22:07 ` Pavel Machek
2019-01-05 12:16 ` Jacek Anaszewski [this message]
2019-01-05 12:31 ` Pavel Machek
2019-01-05 13:16 ` Jacek Anaszewski
2019-01-05 22:12 ` Generic RGB LED support was " Pavel Machek
2019-01-06 15:52 ` Jacek Anaszewski
2019-01-07 19:13 ` Jacek Anaszewski
2019-01-07 19:36 ` Dan Murphy
2019-01-07 20:59 ` Jacek Anaszewski
2019-01-07 21:14 ` Dan Murphy
2019-01-08 21:18 ` Jacek Anaszewski
2019-01-08 21:25 ` Dan Murphy
2019-01-10 12:46 ` Dan Murphy
2019-01-10 19:23 ` Jacek Anaszewski
2019-01-10 19:58 ` Dan Murphy
2019-01-10 21:02 ` Jacek Anaszewski
2019-01-10 21:07 ` Dan Murphy
2019-01-08 22:59 ` Pavel Machek
2019-01-09 7:11 ` Vesa Jääskeläinen
2019-01-13 16:37 ` Jacek Anaszewski
2019-01-05 0:39 ` Vesa Jääskeläinen
2019-01-07 19:34 ` Dan Murphy
2019-01-09 6:20 ` Vesa Jääskeläinen
2019-01-07 21:13 ` Jacek Anaszewski
2019-01-07 21:15 ` Dan Murphy
2019-01-09 6:46 ` Vesa Jääskeläinen
2019-01-13 16:36 ` Jacek Anaszewski
2018-12-20 20:31 ` Jacek Anaszewski
2018-12-21 7:32 ` Jacek Anaszewski
2018-12-21 13:05 ` Dan Murphy
2018-12-29 18:28 ` Jacek Anaszewski
2018-12-29 19:07 ` Pavel Machek
2018-12-30 17:09 ` Jacek Anaszewski
2018-12-30 17:35 ` Pavel Machek
2018-12-31 15:43 ` Jacek Anaszewski
2018-12-31 15:47 ` Jacek Anaszewski
2018-12-31 19:15 ` Dan Murphy
2019-01-01 14:42 ` Jacek Anaszewski
2019-01-01 18:11 ` Dan Murphy
2019-01-01 22:06 ` Jacek Anaszewski
2018-12-31 16:28 ` Pavel Machek
2019-01-01 14:26 ` Jacek Anaszewski
2018-12-19 22:03 ` Pavel Machek
2018-12-19 22:08 ` Dan Murphy
2018-12-19 22:27 ` Pavel Machek
2018-12-20 1:31 ` Dan Murphy
2018-12-20 9:06 ` Pavel Machek
2018-12-20 14:03 ` Dan Murphy
2019-01-08 21:10 ` Jacek Anaszewski
2019-01-08 21:17 ` Dan Murphy
2019-07-22 20:59 ` Backlight in motorola Droid 4 Pavel Machek
2019-07-23 15:53 ` Dan Murphy
2019-07-24 8:22 ` Pavel Machek
2019-07-24 12:45 ` Pavel Machek
2019-07-24 15:10 ` Dan Murphy
2019-07-24 15:22 ` Dan Murphy
2019-07-26 14:38 ` Dan Murphy
2019-07-29 22:00 ` Pavel Machek
2019-07-30 18:21 ` Dan Murphy
2019-07-30 21:52 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4cf79414-578e-eea7-4f46-fc8789206988@gmail.com \
--to=jacek.anaszewski@gmail.com \
--cc=dachaac@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).