From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Laxman Dewangan <ldewangan@nvidia.com>,
javier@osg.samsung.com, mturquette@baylibre.com,
robh+dt@kernel.org, linux@armlinux.org.uk
Cc: linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org,
Javier Martinez Canillas <javier@dowhile0.org>
Subject: Re: [PATCH 3/5] clk: max77686: Add DT binding details for PMIC MAX77620
Date: Thu, 16 Jun 2016 11:49:07 +0200 [thread overview]
Message-ID: <57627613.2000409@samsung.com> (raw)
In-Reply-To: <1466000018-16784-4-git-send-email-ldewangan@nvidia.com>
On 06/15/2016 04:13 PM, Laxman Dewangan wrote:
> Maxim has used the same clock IP on multiple PMICs like
> MAX77686, MAX77802, MAX77620. Only differences are the
> number of clocks from these PMICs.
>
> Add clock binding details and example for the max77620 in
> maxim,max77686.
>
> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
> CC: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> CC: Javier Martinez Canillas <javier@dowhile0.org>
> ---
> .../devicetree/bindings/clock/maxim,max77686.txt | 38 +++++++++++++++++++---
> include/dt-bindings/mfd/max77620.h | 4 +++
> 2 files changed, 38 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
> index 354e5ab..24deb19 100644
> --- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt
> +++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
> @@ -1,8 +1,11 @@
> -Binding for Maxim MAX77686/MAX77802 32k clock generator block
> +Binding for Maxim MAX77686/MAX77802/MAX77620 32k clock generator block
>
> -This is a part of device tree bindings of MAX77686/MAX77802 multi-function
> -device. More information can be found in bindings/mfd/max77686.txt file for
> -MAX77686 and bindings/mfd/max77802.txt for MAX77802.
> +This is a part of device tree bindings of MAX77686/MAX77802/MAX77620
> +multi-function device. More information can be found in MFD DT binding
> +doc as follows:
> + bindings/mfd/max77686.txt for MAX77686 and
> + bindings/mfd/max77802.txt for MAX77802 and
> + bindings/mfd/max77620.txt for MAX77620.
>
> The MAX77686 contains three 32.768khz clock outputs that can be controlled
> (gated/ungated) over I2C.
> @@ -10,6 +13,9 @@ The MAX77686 contains three 32.768khz clock outputs that can be controlled
> The MAX77802 contains two 32.768khz clock outputs that can be controlled
> (gated/ungated) over I2C.
>
> +The MAX77686 contains one 32.768khz clock outputs that can be controlled
> +(gated/ungated) over I2C.
> +
> Following properties should be presend in main device node of the MFD chip.
Please update the information about allowed IDs.
>
> Required properties:
> @@ -82,3 +88,27 @@ Example:
> clock-names = "my-clock";
> clocks = <&max77802 MAX77802_CLK_32K_AP>;
> };
> +
> +
> +3. With MAX77620:
> +
> +#include <dt-bindings/mfd/max77620.h>
> +:::
Same as before: ':::'
> +
> + Node of the MFD chip
> + max77620: max77620@3c {
> + compatible = "maxim,max77620";
> + reg = <0x3c>;
> + :::
> + #clock-cells = <1>;
> + :::
> + };
> +
> + Clock consumer node
> +
> + foo@0 {
> + compatible = "bar,foo";
> + /* ... */
> + clock-names = "my-clock";
> + clocks = <&max77620 MAX77620_CLK_32K_OUT0>;
> + };
> diff --git a/include/dt-bindings/mfd/max77620.h b/include/dt-bindings/mfd/max77620.h
> index b911a07..e1bd08c 100644
> --- a/include/dt-bindings/mfd/max77620.h
> +++ b/include/dt-bindings/mfd/max77620.h
> @@ -36,4 +36,8 @@
> #define MAX77620_FPS_SRC_NONE 3
> #define MAX77620_FPS_SRC_DEF 4
>
> +/* MAX77686 clocks */
copy&paste error.
> +#define MAX77620_CLKS_NUM 1
> +#define MAX77620_CLK_32K_OUT0 0
First clk ID, then NUM.
Best regards,
Krzysztof
> +
> #endif
>
next prev parent reply other threads:[~2016-06-16 9:49 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-15 14:13 [PATCH 0/5] clk: Combine MAX77686 and MAX77802 driver and extend for MAX77620 Laxman Dewangan
2016-06-15 14:13 ` [PATCH 1/5] clk: max77686: Combine Maxim max77686 and max77802 driver Laxman Dewangan
2016-06-15 15:12 ` Javier Martinez Canillas
2016-06-15 15:35 ` kbuild test robot
2016-06-15 15:35 ` [PATCH] clk: max77686: fix semicolon.cocci warnings kbuild test robot
2016-06-16 9:31 ` [PATCH 1/5] clk: max77686: Combine Maxim max77686 and max77802 driver Krzysztof Kozlowski
2016-06-16 13:02 ` Krzysztof Kozlowski
2016-06-15 14:13 ` [PATCH 2/5] clk: Combine DT binding doc for max77686 and max77802 Laxman Dewangan
2016-06-15 15:19 ` Javier Martinez Canillas
2016-06-16 9:34 ` Krzysztof Kozlowski
2016-06-16 9:44 ` Krzysztof Kozlowski
2016-06-15 14:13 ` [PATCH 3/5] clk: max77686: Add DT binding details for PMIC MAX77620 Laxman Dewangan
2016-06-15 15:24 ` Javier Martinez Canillas
2016-06-16 9:49 ` Krzysztof Kozlowski [this message]
2016-06-15 14:13 ` [PATCH 4/5] clk: max77686: Add support for MAX77620 clocks Laxman Dewangan
2016-06-15 15:27 ` Javier Martinez Canillas
2016-06-16 9:54 ` Krzysztof Kozlowski
2016-06-16 9:52 ` Laxman Dewangan
2016-06-16 10:11 ` Krzysztof Kozlowski
2016-06-16 13:02 ` Krzysztof Kozlowski
2016-06-15 14:13 ` [PATCH 5/5] ARM: config: Get rid of config COMMON_CLK_MAX77802 Laxman Dewangan
2016-06-15 15:39 ` Javier Martinez Canillas
2016-06-16 12:25 ` Krzysztof Kozlowski
2016-06-16 13:06 ` Javier Martinez Canillas
2016-06-16 13:08 ` Laxman Dewangan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57627613.2000409@samsung.com \
--to=k.kozlowski@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=javier@dowhile0.org \
--cc=javier@osg.samsung.com \
--cc=ldewangan@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).