[PATCH v3 08/41] powerpc/32: Reconcile interrupts in C

From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Michael Ellerman <mpe@ellerman.id.au>,
	npiggin@gmail.com
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v3 08/41] powerpc/32: Reconcile interrupts in C
Date: Fri, 12 Mar 2021 12:50:17 +0000 (UTC)	[thread overview]
Message-ID: <602e1ec47e15ca540f7edb9cf6feb6c249911bd6.1615552866.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <cover.1615552866.git.christophe.leroy@csgroup.eu>

There is no need for this to be in asm anymore,
use the new interrupt entry wrapper.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
 arch/powerpc/include/asm/interrupt.h |  4 ++
 arch/powerpc/kernel/entry_32.S       | 58 ----------------------------
 2 files changed, 4 insertions(+), 58 deletions(-)

diff --git a/arch/powerpc/include/asm/interrupt.h b/arch/powerpc/include/asm/interrupt.h
index 232a4847f596..b2f69e5dcb50 100644
--- a/arch/powerpc/include/asm/interrupt.h
+++ b/arch/powerpc/include/asm/interrupt.h
@@ -29,6 +29,10 @@ static inline void booke_restore_dbcr0(void)
 
 static inline void interrupt_enter_prepare(struct pt_regs *regs, struct interrupt_state *state)
 {
+#ifdef CONFIG_PPC32
+	if (!arch_irq_disabled_regs(regs))
+		trace_hardirqs_off();
+#endif
 	/*
 	 * Book3E reconciles irq soft mask in asm
 	 */
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 535c55f4393a..0f18fe14649c 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -202,22 +202,6 @@ transfer_to_handler_cont:
 	lwz	r9,4(r9)		/* where to go when done */
 #if defined(CONFIG_PPC_8xx) && defined(CONFIG_PERF_EVENTS)
 	mtspr	SPRN_NRI, r0
-#endif
-#ifdef CONFIG_TRACE_IRQFLAGS
-	/*
-	 * When tracing IRQ state (lockdep) we enable the MMU before we call
-	 * the IRQ tracing functions as they might access vmalloc space or
-	 * perform IOs for console output.
-	 *
-	 * To speed up the syscall path where interrupts stay on, let's check
-	 * first if we are changing the MSR value at all.
-	 */
-	tophys_novmstack r12, r1
-	lwz	r12,_MSR(r12)
-	andi.	r12,r12,MSR_EE
-	bne	1f
-
-	/* MSR isn't changing, just transition directly */
 #endif
 	mtspr	SPRN_SRR0,r11
 	mtspr	SPRN_SRR1,r10
@@ -244,48 +228,6 @@ transfer_to_handler_cont:
 _ASM_NOKPROBE_SYMBOL(transfer_to_handler)
 _ASM_NOKPROBE_SYMBOL(transfer_to_handler_cont)
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-1:	/* MSR is changing, re-enable MMU so we can notify lockdep. We need to
-	 * keep interrupts disabled at this point otherwise we might risk
-	 * taking an interrupt before we tell lockdep they are enabled.
-	 */
-	lis	r12,reenable_mmu@h
-	ori	r12,r12,reenable_mmu@l
-	LOAD_REG_IMMEDIATE(r0, MSR_KERNEL)
-	mtspr	SPRN_SRR0,r12
-	mtspr	SPRN_SRR1,r0
-	rfi
-#ifdef CONFIG_40x
-	b .	/* Prevent prefetch past rfi */
-#endif
-
-reenable_mmu:
-	/*
-	 * We save a bunch of GPRs,
-	 * r3 can be different from GPR3(r1) at this point, r9 and r11
-	 * contains the old MSR and handler address respectively,
-	 * r0, r4-r8, r12, CCR, CTR, XER etc... are left
-	 * clobbered as they aren't useful past this point.
-	 */
-
-	stwu	r1,-32(r1)
-	stw	r9,8(r1)
-	stw	r11,12(r1)
-	stw	r3,16(r1)
-
-	/* If we are disabling interrupts (normal case), simply log it with
-	 * lockdep
-	 */
-1:	bl	trace_hardirqs_off
-	lwz	r3,16(r1)
-	lwz	r11,12(r1)
-	lwz	r9,8(r1)
-	addi	r1,r1,32
-	mtctr	r11
-	mtlr	r9
-	bctr				/* jump to handler */
-#endif /* CONFIG_TRACE_IRQFLAGS */
-
 #ifndef CONFIG_VMAP_STACK
 /*
  * On kernel stack overflow, load up an initial stack pointer
-- 
2.25.0

