From: Matt Helsley <mhelsley@vmware.com>
To: <linux-kernel@vger.kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>,
Peter Zijlstra <peterz@infradead.org>,
Steven Rostedt <rostedt@goodmis.org>,
Julien Thierry <jthierry@redhat.com>,
Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>,
Matt Helsley <mhelsley@vmware.com>
Subject: [RFC][PATCH v5 35/51] objtool: mcount: Remove endian wrappers
Date: Thu, 18 Jun 2020 13:38:21 -0700 [thread overview]
Message-ID: <72408e62826ff1ef26568104cd63dd1851a96dd4.1592510545.git.mhelsley@vmware.com> (raw)
In-Reply-To: <cover.1592510545.git.mhelsley@vmware.com>
Now that they're no longer used we can remove these endian
wrappers.
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
---
tools/objtool/recordmcount.c | 63 ------------------------------------
1 file changed, 63 deletions(-)
diff --git a/tools/objtool/recordmcount.c b/tools/objtool/recordmcount.c
index 7f4d18e83e24..ff52697613b1 100644
--- a/tools/objtool/recordmcount.c
+++ b/tools/objtool/recordmcount.c
@@ -149,53 +149,6 @@ static int make_nop_arm64(struct section *txts, size_t const offset)
return 0;
}
-/* w8rev, w8nat, ...: Handle endianness. */
-
-static uint64_t w8rev(uint64_t const x)
-{
- return ((0xff & (x >> (0 * 8))) << (7 * 8))
- | ((0xff & (x >> (1 * 8))) << (6 * 8))
- | ((0xff & (x >> (2 * 8))) << (5 * 8))
- | ((0xff & (x >> (3 * 8))) << (4 * 8))
- | ((0xff & (x >> (4 * 8))) << (3 * 8))
- | ((0xff & (x >> (5 * 8))) << (2 * 8))
- | ((0xff & (x >> (6 * 8))) << (1 * 8))
- | ((0xff & (x >> (7 * 8))) << (0 * 8));
-}
-
-static uint32_t w4rev(uint32_t const x)
-{
- return ((0xff & (x >> (0 * 8))) << (3 * 8))
- | ((0xff & (x >> (1 * 8))) << (2 * 8))
- | ((0xff & (x >> (2 * 8))) << (1 * 8))
- | ((0xff & (x >> (3 * 8))) << (0 * 8));
-}
-
-static uint32_t w2rev(uint16_t const x)
-{
- return ((0xff & (x >> (0 * 8))) << (1 * 8))
- | ((0xff & (x >> (1 * 8))) << (0 * 8));
-}
-
-static uint64_t w8nat(uint64_t const x)
-{
- return x;
-}
-
-static uint32_t w4nat(uint32_t const x)
-{
- return x;
-}
-
-static uint32_t w2nat(uint16_t const x)
-{
- return x;
-}
-
-static uint64_t (*w8)(uint64_t);
-static uint32_t (*w)(uint32_t);
-static uint32_t (*w2)(uint16_t);
-
/* Names of the sections that could contain calls to mcount. */
static int is_mcounted_section_name(char const *const txtname)
{
@@ -571,22 +524,12 @@ static int do_file(char const *const fname)
goto out;
}
- w = w4nat;
- w2 = w2nat;
- w8 = w8nat;
switch (lf->ehdr.e_ident[EI_DATA]) {
- static unsigned int const endian = 1;
default:
fprintf(stderr, "unrecognized ELF data encoding %d: %s\n",
lf->ehdr.e_ident[EI_DATA], fname);
goto out;
case ELFDATA2LSB:
- if (*(unsigned char const *)&endian != 1) {
- /* objtool is big endian, file.o is little endian. */
- w = w4rev;
- w2 = w2rev;
- w8 = w8rev;
- }
ideal_nop4_arm = ideal_nop4_arm_le;
bl_mcount_arm = bl_mcount_arm_le;
push_arm = push_arm_le;
@@ -594,12 +537,6 @@ static int do_file(char const *const fname)
push_bl_mcount_thumb = push_bl_mcount_thumb_le;
break;
case ELFDATA2MSB:
- if (*(unsigned char const *)&endian != 0) {
- /* objtool is little endian, file.o is big endian. */
- w = w4rev;
- w2 = w2rev;
- w8 = w8rev;
- }
ideal_nop4_arm = ideal_nop4_arm_be;
bl_mcount_arm = bl_mcount_arm_be;
push_arm = push_arm_be;
--
2.20.1
next prev parent reply other threads:[~2020-06-18 20:42 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-18 20:37 [RFC][PATCH v5 00/51] objtool: Make recordmcount a subcommand Matt Helsley
2020-06-18 20:37 ` [RFC][PATCH v5 01/51] objtool: Factor out reasons to build objtool Matt Helsley
2020-06-24 15:37 ` Miroslav Benes
2020-06-18 20:37 ` [RFC][PATCH v5 02/51] objtool: Prepare to merge recordmcount Matt Helsley
2020-06-18 20:37 ` [RFC][PATCH v5 03/51] objtool: Make recordmcount into mcount subcmd Matt Helsley
2020-06-25 10:39 ` Miroslav Benes
2020-06-18 20:37 ` [RFC][PATCH v5 04/51] objtool: recordmcount: Start using objtool's elf wrapper Matt Helsley
2020-06-18 20:37 ` [RFC][PATCH v5 05/51] objtool: recordmcount: Search for __mcount_loc before walking the sections Matt Helsley
2020-06-18 20:37 ` [RFC][PATCH v5 06/51] objtool: recordmcount: Convert do_func() relhdrs Matt Helsley
2020-06-18 20:37 ` [RFC][PATCH v5 07/51] objtool: mcount: Move nhdr into find_symtab() Matt Helsley
2020-06-18 20:37 ` [RFC][PATCH v5 08/51] objtool: mcount: Remove unused fname parameter Matt Helsley
2020-06-18 20:37 ` [RFC][PATCH v5 09/51] objtool: mcount: Use libelf for section header names Matt Helsley
2020-06-18 20:37 ` [RFC][PATCH v5 10/51] objtool: mcount: Walk objtool Elf structs in find_secsym_ndx Matt Helsley
2020-06-18 20:37 ` [RFC][PATCH v5 11/51] objtool: mcount: Use symbol structs to find mcount relocations Matt Helsley
2020-06-18 20:37 ` [RFC][PATCH v5 12/51] objtool: mcount: Walk relocation lists Matt Helsley
2020-06-18 20:37 ` [RFC][PATCH v5 13/51] objtool: mcount: Return symbol from mcountsym Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 14/51] objtool: mcount: Move get_mcountsym Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 15/51] objtool: mcount: Replace MIPS offset types Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 16/51] objtool: mcount: Move is_fake_mcount() Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 17/51] objtool: mcount: Stop using ehdr in find_section_sym_index Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 18/51] objtool: mcount: Move find_section_sym_index() Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 19/51] objtool: mcount: Restrict using ehdr in append_func() Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 20/51] objtool: mcount: Use objtool ELF to write Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 21/51] objtool: mcount: Move nop_mcount() Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 22/51] objtool: mcount: Move has_rel_mcount() and tot_relsize() Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 23/51] objtool: mcount: Move relocation entry size detection Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 24/51] objtool: mcount: Only keep ELF file size Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 25/51] objtool: mcount: Use ELF header from objtool Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 26/51] objtool: mcount: Remove unused file mapping Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 27/51] objtool: mcount: Reduce usage of _size wrapper Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 28/51] objtool: mcount: Move mcount_adjust out of wrapper Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 29/51] objtool: mcount: Pre-allocate new ELF sections Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 30/51] objtool: mcount: Generic location and relocation table types Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 31/51] objtool: mcount: Use objtool relocation section Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 32/51] objtool: mcount: Move sift_rel_mcount out of wrapper file Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 33/51] objtool: mcount: Remove wrapper for ELF relocation type Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 34/51] objtool: mcount: Remove wrapper double-include trick Matt Helsley
2020-06-18 20:38 ` Matt Helsley [this message]
2020-06-18 20:38 ` [RFC][PATCH v5 36/51] objtool: mcount: Rename to mcount.c Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 37/51] objtool: mcount: Simplify mcount name matching Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 38/51] objtool: mcount: mcount symbol name simplification Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 39/51] objtool: mcount: Verify x86 instruction with memcmp() Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 40/51] objtool: mcount: const-ify ARM instruction patterns Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 41/51] objtool: mcount: Convert nop writes to elf_write_insn() Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 42/51] objtool: mcount: Move mcount symbol name testing Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 43/51] objtool: check: Use class to recognize kcov calls Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 44/51] objtool: mcount: Keep lists locations and relocations Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 45/51] objtool: mcount: Move mcount section test to objtool ELF Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 46/51] objtool: mcount: Flag mcount relocation sections Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 47/51] objtool: mcount: Merge section mcount flags Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 48/51] objtool: mcount: Eliminate first pass Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 49/51] objtool: mcount: Remove relocation size check Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 50/51] objtool: mcount: Remove useless lookup Matt Helsley
2020-06-18 20:38 ` [RFC][PATCH v5 51/51] objtool: mcount: Remove stale description Matt Helsley
2020-06-23 14:12 ` [RFC][PATCH v5 00/51] objtool: Make recordmcount a subcommand Matt Helsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=72408e62826ff1ef26568104cd63dd1851a96dd4.1592510545.git.mhelsley@vmware.com \
--to=mhelsley@vmware.com \
--cc=jpoimboe@redhat.com \
--cc=jthierry@redhat.com \
--cc=kamalesh@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=rostedt@goodmis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).