From: Hans Verkuil <hverkuil@xs4all.nl>
To: Sergey Senozhatsky <senozhatsky@chromium.org>,
Hans Verkuil <hans.verkuil@cisco.com>,
Tomasz Figa <tfiga@chromium.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
Kyungmin Park <kyungmin.park@samsung.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Sakari Ailus <sakari.ailus@iki.fi>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Pawel Osciak <posciak@chromium.org>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCHv4 04/11] videobuf2: add queue memory consistency parameter
Date: Fri, 6 Mar 2020 15:04:47 +0100 [thread overview]
Message-ID: <7ab74b32-441d-1a1a-0112-6c4d0c0b900c@xs4all.nl> (raw)
In-Reply-To: <20200302041213.27662-5-senozhatsky@chromium.org>
On 02/03/2020 05:12, Sergey Senozhatsky wrote:
> Preparations for future V4L2_FLAG_MEMORY_NON_CONSISTENT support.
>
> Extend vb2_core_reqbufs() with queue memory consistency flag
> that is applied to the newly allocated buffers.
>
> An attempt to allocate a buffer with consistency requirements
> which don't match queue's consistency model will fail.
>
> Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
> ---
> .../media/common/videobuf2/videobuf2-core.c | 47 +++++++++++++++----
> .../media/common/videobuf2/videobuf2-v4l2.c | 6 +--
> drivers/media/dvb-core/dvb_vb2.c | 2 +-
> include/media/videobuf2-core.h | 7 ++-
> 4 files changed, 47 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c
> index 4489744fbbd9..3ca0545db7ee 100644
> --- a/drivers/media/common/videobuf2/videobuf2-core.c
> +++ b/drivers/media/common/videobuf2/videobuf2-core.c
> @@ -664,8 +664,19 @@ int vb2_verify_memory_type(struct vb2_queue *q,
> }
> EXPORT_SYMBOL(vb2_verify_memory_type);
>
> +static void set_queue_consistency(struct vb2_queue *q, bool consistent_mem)
> +{
> + if (!vb2_queue_allows_cache_hints(q))
> + return;
> +
> + if (consistent_mem)
> + q->dma_attrs &= ~DMA_ATTR_NON_CONSISTENT;
> + else
> + q->dma_attrs |= DMA_ATTR_NON_CONSISTENT;
> +}
> +
> int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory,
> - unsigned int *count)
> + bool consistent_mem, unsigned int *count)
> {
> unsigned int num_buffers, allocated_buffers, num_planes = 0;
> unsigned plane_sizes[VB2_MAX_PLANES] = { };
> @@ -720,6 +731,7 @@ int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory,
> num_buffers = min_t(unsigned int, num_buffers, VB2_MAX_FRAME);
> memset(q->alloc_devs, 0, sizeof(q->alloc_devs));
> q->memory = memory;
> + set_queue_consistency(q, consistent_mem);
>
> /*
> * Ask the driver how many buffers and planes per buffer it requires.
> @@ -803,9 +815,21 @@ int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory,
> }
> EXPORT_SYMBOL_GPL(vb2_core_reqbufs);
>
> +static bool verify_consistency_attr(struct vb2_queue *q, bool consistent_mem)
> +{
> + bool queue_attr = q->dma_attrs & DMA_ATTR_NON_CONSISTENT;
> +
> + if (consistent_mem != queue_attr) {
This is the wrong way around!
It's much better to write it like this:
bool queue_is_consistent = !(q->dma_attrs & DMA_ATTR_NON_CONSISTENT);
if (consistent_mem != queue_is_consistent) {
What concerns me more is that this means that this series has not been
tested properly. I found this when testing with v4l2-compliance and vivid.
I'll reply to the cover letter with more information about what needs to be
done before I merge this.
> + dprintk(1, "memory consistency model mismatch\n");
> + return false;
> + }
> + return true;
> +}
> +
> int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory,
> - unsigned int *count, unsigned requested_planes,
> - const unsigned requested_sizes[])
> + bool consistent_mem, unsigned int *count,
> + unsigned requested_planes,
> + const unsigned requested_sizes[])
Use 'unsigned int' in the two lines above, as per checkpatch suggestion.
Regards,
Hans
> {
> unsigned int num_planes = 0, num_buffers, allocated_buffers;
> unsigned plane_sizes[VB2_MAX_PLANES] = { };
> @@ -823,10 +847,15 @@ int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory,
> }
> memset(q->alloc_devs, 0, sizeof(q->alloc_devs));
> q->memory = memory;
> + set_queue_consistency(q, consistent_mem);
> q->waiting_for_buffers = !q->is_output;
> - } else if (q->memory != memory) {
> - dprintk(1, "memory model mismatch\n");
> - return -EINVAL;
> + } else {
> + if (q->memory != memory) {
> + dprintk(1, "memory model mismatch\n");
> + return -EINVAL;
> + }
> + if (!verify_consistency_attr(q, consistent_mem))
> + return -EINVAL;
> }
>
> num_buffers = min(*count, VB2_MAX_FRAME - q->num_buffers);
> @@ -2498,7 +2527,7 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read)
> fileio->memory = VB2_MEMORY_MMAP;
> fileio->type = q->type;
> q->fileio = fileio;
> - ret = vb2_core_reqbufs(q, fileio->memory, &fileio->count);
> + ret = vb2_core_reqbufs(q, fileio->memory, true, &fileio->count);
> if (ret)
> goto err_kfree;
>
> @@ -2555,7 +2584,7 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read)
>
> err_reqbufs:
> fileio->count = 0;
> - vb2_core_reqbufs(q, fileio->memory, &fileio->count);
> + vb2_core_reqbufs(q, fileio->memory, true, &fileio->count);
>
> err_kfree:
> q->fileio = NULL;
> @@ -2575,7 +2604,7 @@ static int __vb2_cleanup_fileio(struct vb2_queue *q)
> vb2_core_streamoff(q, q->type);
> q->fileio = NULL;
> fileio->count = 0;
> - vb2_core_reqbufs(q, fileio->memory, &fileio->count);
> + vb2_core_reqbufs(q, fileio->memory, true, &fileio->count);
> kfree(fileio);
> dprintk(3, "file io emulator closed\n");
> }
> diff --git a/drivers/media/common/videobuf2/videobuf2-v4l2.c b/drivers/media/common/videobuf2/videobuf2-v4l2.c
> index c847bcea6e95..6111d74f68c9 100644
> --- a/drivers/media/common/videobuf2/videobuf2-v4l2.c
> +++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c
> @@ -724,7 +724,7 @@ int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req)
> int ret = vb2_verify_memory_type(q, req->memory, req->type);
>
> fill_buf_caps(q, &req->capabilities);
> - return ret ? ret : vb2_core_reqbufs(q, req->memory, &req->count);
> + return ret ? ret : vb2_core_reqbufs(q, req->memory, true, &req->count);
> }
> EXPORT_SYMBOL_GPL(vb2_reqbufs);
>
> @@ -798,7 +798,7 @@ int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create)
> for (i = 0; i < requested_planes; i++)
> if (requested_sizes[i] == 0)
> return -EINVAL;
> - return ret ? ret : vb2_core_create_bufs(q, create->memory,
> + return ret ? ret : vb2_core_create_bufs(q, create->memory, true,
> &create->count, requested_planes, requested_sizes);
> }
> EXPORT_SYMBOL_GPL(vb2_create_bufs);
> @@ -974,7 +974,7 @@ int vb2_ioctl_reqbufs(struct file *file, void *priv,
> return res;
> if (vb2_queue_is_busy(vdev, file))
> return -EBUSY;
> - res = vb2_core_reqbufs(vdev->queue, p->memory, &p->count);
> + res = vb2_core_reqbufs(vdev->queue, p->memory, true, &p->count);
> /* If count == 0, then the owner has released all buffers and he
> is no longer owner of the queue. Otherwise we have a new owner. */
> if (res == 0)
> diff --git a/drivers/media/dvb-core/dvb_vb2.c b/drivers/media/dvb-core/dvb_vb2.c
> index 6974f1731529..e60063652164 100644
> --- a/drivers/media/dvb-core/dvb_vb2.c
> +++ b/drivers/media/dvb-core/dvb_vb2.c
> @@ -342,7 +342,7 @@ int dvb_vb2_reqbufs(struct dvb_vb2_ctx *ctx, struct dmx_requestbuffers *req)
>
> ctx->buf_siz = req->size;
> ctx->buf_cnt = req->count;
> - ret = vb2_core_reqbufs(&ctx->vb_q, VB2_MEMORY_MMAP, &req->count);
> + ret = vb2_core_reqbufs(&ctx->vb_q, VB2_MEMORY_MMAP, true, &req->count);
> if (ret) {
> ctx->state = DVB_VB2_STATE_NONE;
> dprintk(1, "[%s] count=%d size=%d errno=%d\n", ctx->name,
> diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
> index 731fd9fbd506..ba83ac754c21 100644
> --- a/include/media/videobuf2-core.h
> +++ b/include/media/videobuf2-core.h
> @@ -737,6 +737,7 @@ void vb2_core_querybuf(struct vb2_queue *q, unsigned int index, void *pb);
> * vb2_core_reqbufs() - Initiate streaming.
> * @q: pointer to &struct vb2_queue with videobuf2 queue.
> * @memory: memory type, as defined by &enum vb2_memory.
> + * @consistent_mem: memory consistency model.
> * @count: requested buffer count.
> *
> * Videobuf2 core helper to implement VIDIOC_REQBUF() operation. It is called
> @@ -761,12 +762,13 @@ void vb2_core_querybuf(struct vb2_queue *q, unsigned int index, void *pb);
> * Return: returns zero on success; an error code otherwise.
> */
> int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory,
> - unsigned int *count);
> + bool consistent_mem, unsigned int *count);
>
> /**
> * vb2_core_create_bufs() - Allocate buffers and any required auxiliary structs
> * @q: pointer to &struct vb2_queue with videobuf2 queue.
> * @memory: memory type, as defined by &enum vb2_memory.
> + * @consistent_mem: memory consistency model.
> * @count: requested buffer count.
> * @requested_planes: number of planes requested.
> * @requested_sizes: array with the size of the planes.
> @@ -784,7 +786,8 @@ int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory,
> * Return: returns zero on success; an error code otherwise.
> */
> int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory,
> - unsigned int *count, unsigned int requested_planes,
> + bool consistent_mem, unsigned int *count,
> + unsigned int requested_planes,
> const unsigned int requested_sizes[]);
>
> /**
>
next prev parent reply other threads:[~2020-03-06 14:04 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-02 4:12 [PATCHv4 00/11] Implement V4L2_BUF_FLAG_NO_CACHE_* flags Sergey Senozhatsky
2020-03-02 4:12 ` [PATCHv4 01/11] videobuf2: add cache management members Sergey Senozhatsky
2020-03-06 13:57 ` Hans Verkuil
2020-03-07 5:22 ` Sergey Senozhatsky
2020-03-07 9:46 ` Sergey Senozhatsky
2020-03-07 10:10 ` Hans Verkuil
2020-03-07 11:28 ` Sergey Senozhatsky
2020-03-07 11:47 ` Hans Verkuil
2020-03-09 3:27 ` Sergey Senozhatsky
2020-03-09 3:44 ` Sergey Senozhatsky
2020-03-09 7:21 ` Hans Verkuil
2020-03-09 7:25 ` Sergey Senozhatsky
2020-03-09 7:28 ` Hans Verkuil
2020-03-09 7:39 ` Sergey Senozhatsky
2020-03-09 8:58 ` Tomasz Figa
2020-03-09 9:08 ` Sergey Senozhatsky
2020-03-09 9:17 ` Tomasz Figa
2020-03-09 9:29 ` Sergey Senozhatsky
2020-03-09 4:03 ` Sergey Senozhatsky
2020-03-09 7:17 ` Hans Verkuil
2020-03-02 4:12 ` [PATCHv4 02/11] videobuf2: handle V4L2 buffer cache flags Sergey Senozhatsky
2020-03-02 4:12 ` [PATCHv4 03/11] videobuf2: add V4L2_FLAG_MEMORY_NON_CONSISTENT flag Sergey Senozhatsky
2020-03-06 13:58 ` Hans Verkuil
2020-03-07 8:09 ` Sergey Senozhatsky
2020-03-02 4:12 ` [PATCHv4 04/11] videobuf2: add queue memory consistency parameter Sergey Senozhatsky
2020-03-06 14:04 ` Hans Verkuil [this message]
2020-03-07 7:50 ` Sergey Senozhatsky
2020-03-07 10:03 ` Hans Verkuil
2020-03-20 13:46 ` Dafna Hirschfeld
2020-03-24 2:39 ` Sergey Senozhatsky
2020-03-24 10:17 ` Ezequiel Garcia
2020-03-25 2:32 ` Sergey Senozhatsky
2020-03-27 11:27 ` Tomasz Figa
2020-03-02 4:12 ` [PATCHv4 05/11] videobuf2: handle V4L2_FLAG_MEMORY_NON_CONSISTENT flag Sergey Senozhatsky
2020-03-06 15:30 ` Hans Verkuil
2020-03-07 7:51 ` Sergey Senozhatsky
2020-03-07 9:38 ` Sergey Senozhatsky
2020-03-07 10:05 ` Hans Verkuil
2020-03-02 4:12 ` [PATCHv4 06/11] videobuf2: factor out planes prepare/finish functions Sergey Senozhatsky
2020-03-02 4:12 ` [PATCHv4 07/11] videobuf2: do not sync caches when we are allowed not to Sergey Senozhatsky
2020-03-02 4:12 ` [PATCHv4 08/11] videobuf2: check ->synced flag in prepare() and finish() Sergey Senozhatsky
2020-03-02 4:12 ` [PATCHv4 09/11] videobuf2: add begin/end cpu_access callbacks to dma-contig Sergey Senozhatsky
2020-03-02 4:12 ` [PATCHv4 10/11] videobuf2: add begin/end cpu_access callbacks to dma-sg Sergey Senozhatsky
2020-03-06 14:04 ` Hans Verkuil
2020-03-07 5:26 ` Sergey Senozhatsky
2020-03-07 9:32 ` Hans Verkuil
2020-03-07 9:39 ` Sergey Senozhatsky
2020-03-02 4:12 ` [PATCHv4 11/11] videobuf2: don't test db_attach in dma-contig prepare and finish Sergey Senozhatsky
2020-03-06 14:18 ` [PATCHv4 00/11] Implement V4L2_BUF_FLAG_NO_CACHE_* flags Hans Verkuil
2020-03-07 8:08 ` Sergey Senozhatsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7ab74b32-441d-1a1a-0112-6c4d0c0b900c@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=hans.verkuil@cisco.com \
--cc=kyungmin.park@samsung.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mchehab@kernel.org \
--cc=posciak@chromium.org \
--cc=sakari.ailus@iki.fi \
--cc=senozhatsky@chromium.org \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).