From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
Adrian Hunter <adrian.hunter@intel.com>,
linux-mmc@vger.kernel.org
Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Gregory CLEMENT <gregory.clement@free-electrons.com>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
linux-arm-kernel@lists.infradead.org,
Mike Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, Ziji Hu <huziji@marvell.com>,
Jimmy Xu <zmxu@marvell.com>, Jisheng Zhang <jszhang@marvell.com>,
Nadav Haklai <nadavh@marvell.com>, Ryan Gao <ygao@marvell.com>,
Doug Jones <dougj@marvell.com>, Victor Gu <xigu@marvell.com>,
"Wei(SOCP) Liu" <liuw@marvell.com>,
Wilson Ding <dingwei@marvell.com>,
Yehuda Yitschak <yehuday@marvell.com>,
Marcin Wojtas <mw@semihalf.com>, Hanna Hawa <hannah@marvell.com>,
Kostya Porotchkin <kostap@marvell.com>
Subject: [PATCH v6 13/14] arm64: dts: marvell: add sdhci support for Armada 7K/8K
Date: Tue, 14 Feb 2017 18:01:53 +0100 [thread overview]
Message-ID: <9571ae6d12f2051c1457dc5fc34042b325d00b60.1487091464.git-series.gregory.clement@free-electrons.com> (raw)
In-Reply-To: <cover.ff78bebe0384f650a51e5e6f0f1dca6e7894b53b.1487091464.git-series.gregory.clement@free-electrons.com>
In-Reply-To: <cover.ff78bebe0384f650a51e5e6f0f1dca6e7894b53b.1487091464.git-series.gregory.clement@free-electrons.com>
Also enable it on the Armada 7040 DB and Armada 8040 DB boards.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm64/boot/dts/marvell/armada-7040-db.dts | 14 +++++++++-
arch/arm64/boot/dts/marvell/armada-8040-db.dts | 20 +++++++++++++-
arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 11 +++++++-
arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 11 +++++++-
4 files changed, 56 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 070b589680c5..6adbfcd26369 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -146,3 +146,17 @@
&cpm_usb3_1 {
status = "okay";
};
+
+&ap_sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+};
+
+&cpm_sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 6e6f182fb297..ab16082d9fbf 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -148,3 +148,23 @@
&cps_usb3_1 {
status = "okay";
};
+
+&ap_sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ non-removable;
+};
+
+&cpm_sdhci0 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mmccard: mmccard@0 {
+ compatible = "mmc-card";
+ reg = <0>;
+ };
+
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 5019c8f4acd0..fe41bf9c301e 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -229,6 +229,17 @@
};
+ ap_sdhci0: sdhci@6e0000 {
+ compatible = "marvell,armada-ap806-sdhci";
+ reg = <0x6e0000 0x300>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core";
+ clocks = <&ap_syscon 4>;
+ dma-coherent;
+ marvell,xenon-phy-slow-mode;
+ status = "disabled";
+ };
+
ap_syscon: system-controller@6f4000 {
compatible = "marvell,ap806-system-controller",
"syscon";
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 05222f749a45..8ff545dc4195 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -172,6 +172,17 @@
clocks = <&cpm_syscon0 1 25>;
status = "okay";
};
+
+ cpm_sdhci0: sdhci@780000 {
+ compatible = "marvell,armada-cp110-sdhci";
+ reg = <0x780000 0x300>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core";
+ clocks = <&cpm_syscon0 1 4>;
+ dma-coherent;
+ status = "disabled";
+ };
+
};
cpm_pcie0: pcie@f2600000 {
--
git-series 0.9.1
next prev parent reply other threads:[~2017-02-14 17:03 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-14 17:01 [PATCH v6 00/14] mmc: Add support to Marvell Xenon SD Host Controller Gregory CLEMENT
2017-02-14 17:01 ` [PATCH v6 01/14] clk: apn806: Add eMMC clock to system controller driver Gregory CLEMENT
2017-02-14 17:01 ` [PATCH v6 02/14] clk: apn806: Turn the eMMC clock as optional for dts backwards compatible Gregory CLEMENT
2017-02-14 17:01 ` [PATCH v6 03/14] mmc: core: Add mmc-card dt sub-node parse in core layer Gregory CLEMENT
2017-03-15 12:43 ` Ulf Hansson
2017-03-15 13:46 ` Ziji Hu
2017-03-22 17:11 ` Gregory CLEMENT
2017-02-14 17:01 ` [PATCH v6 04/14] mmc: sdhci: Export sdhci_set_ios() from sdhci.c Gregory CLEMENT
2017-03-22 14:48 ` Adrian Hunter
2017-02-14 17:01 ` [PATCH v6 05/14] mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c Gregory CLEMENT
2017-03-22 14:49 ` Adrian Hunter
2017-02-14 17:01 ` [PATCH v6 06/14] mmc: sdhci: Export sdhci_enable_sdio_irq() from sdhci.c Gregory CLEMENT
2017-03-22 14:49 ` Adrian Hunter
2017-02-14 17:01 ` [PATCH v6 07/14] dt: bindings: Add bindings for Marvell Xenon SD Host Controller Gregory CLEMENT
2017-02-22 21:44 ` Rob Herring
2017-03-15 12:48 ` Ulf Hansson
2017-03-23 5:32 ` [EXT] " Ziji Hu
2017-02-14 17:01 ` [PATCH v6 08/14] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality Gregory CLEMENT
2017-03-15 13:11 ` Ulf Hansson
2017-03-15 13:58 ` Ziji Hu
2017-03-16 2:24 ` Jisheng Zhang
2017-03-22 14:32 ` Adrian Hunter
2017-02-14 17:01 ` [PATCH v6 09/14] mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC Gregory CLEMENT
2017-03-15 13:39 ` Ulf Hansson
2017-03-15 14:31 ` Ziji Hu
2017-03-22 14:33 ` Adrian Hunter
2017-02-14 17:01 ` [PATCH v6 10/14] mmc: sdhci-xenon: Add SoC PHY PAD voltage control Gregory CLEMENT
2017-03-22 14:47 ` Adrian Hunter
2017-02-14 17:01 ` [PATCH v6 11/14] MAINTAINERS: add entry for Marvell Xenon MMC Host Controller drivers Gregory CLEMENT
2017-02-14 17:01 ` [PATCH v6 12/14] arm64: dts: marvell: add eMMC support for Armada 37xx Gregory CLEMENT
2017-02-14 17:01 ` Gregory CLEMENT [this message]
2017-02-14 17:01 ` [PATCH v6 14/14] arm64: configs: enable SDHCI driver for Xenon Gregory CLEMENT
2017-02-20 16:59 ` [PATCH v6 00/14] mmc: Add support to Marvell Xenon SD Host Controller Gregory CLEMENT
2017-02-20 19:32 ` Ulf Hansson
2017-02-27 9:41 ` Ziji Hu
2017-03-10 10:15 ` Gregory CLEMENT
2017-02-20 17:07 ` Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9571ae6d12f2051c1457dc5fc34042b325d00b60.1487091464.git-series.gregory.clement@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=adrian.hunter@intel.com \
--cc=andrew@lunn.ch \
--cc=devicetree@vger.kernel.org \
--cc=dingwei@marvell.com \
--cc=dougj@marvell.com \
--cc=hannah@marvell.com \
--cc=huziji@marvell.com \
--cc=jason@lakedaemon.net \
--cc=jszhang@marvell.com \
--cc=kostap@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=liuw@marvell.com \
--cc=mturquette@baylibre.com \
--cc=mw@semihalf.com \
--cc=nadavh@marvell.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=thomas.petazzoni@free-electrons.com \
--cc=ulf.hansson@linaro.org \
--cc=xigu@marvell.com \
--cc=yehuday@marvell.com \
--cc=ygao@marvell.com \
--cc=zmxu@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).