linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Ramuthevar, Vadivel MuruganX"  <vadivel.muruganx.ramuthevar@linux.intel.com>
To: Vignesh Raghavendra <vigneshr@ti.com>, linux-mtd@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	dwmw2@infradead.org, computersforpeace@gmail.com, richard@nod.at,
	jwboyer@gmail.com, boris.brezillon@free-electrons.com,
	cyrille.pitchen@atmel.com, david.oberhollenzer@sigma-star.at,
	miquel.raynal@bootlin.com, tudor.ambarus@gmail.com,
	andriy.shevchenko@intel.com, cheol.yong.kim@intel.com,
	qi-ming.wu@intel.com
Subject: Re: [PATCH v3 2/3] mtd: spi-nor: cadence-quadspi: Disable the DAC for Intel LGM SoC
Date: Wed, 16 Oct 2019 16:48:15 +0800	[thread overview]
Message-ID: <9b91e39e-a1ab-d99d-50b1-483d6acf5357@linux.intel.com> (raw)
In-Reply-To: <85355c80-1344-db22-ae31-0f20f30b9754@ti.com>

Hi Vignesh,

       Thank you for the review comments.

On 16/10/2019 4:32 PM, Vignesh Raghavendra wrote:
>
> On 09/09/19 4:17 PM, Ramuthevar,Vadivel MuruganX wrote:
>> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
>>
>> on Intel's Lightning Mountain(LGM) SoCs QSPI controller do not use
> s/on/On
Agreed, will update.
>> Direct Access Controller(DAC).
>>
>> This patch introduces to properly disable the Direct Access Controller
> "This patch adds a quirk to disable..." or something something similar
okay, will update.
>> for data transfer instead it uses indirect data transfer.
>>
>> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
>> ---
>>   drivers/mtd/spi-nor/Kconfig           |  2 +-
>>   drivers/mtd/spi-nor/cadence-quadspi.c | 21 +++++++++++++++++++++
>>   2 files changed, 22 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
>> index 6de83277ce8b..ba2e372ae514 100644
>> --- a/drivers/mtd/spi-nor/Kconfig
>> +++ b/drivers/mtd/spi-nor/Kconfig
>> @@ -34,7 +34,7 @@ config SPI_ASPEED_SMC
>>   
>>   config SPI_CADENCE_QUADSPI
>>   	tristate "Cadence Quad SPI controller"
>> -	depends on OF && (ARM || ARM64 || COMPILE_TEST)
>> +	depends on OF && (ARM || ARM64 || COMPILE_TEST || X86)
>>   	help
>>   	  Enable support for the Cadence Quad SPI Flash controller.
>>   
>> diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
>> index 67f15a1f16fd..73b9fbd1508a 100644
>> --- a/drivers/mtd/spi-nor/cadence-quadspi.c
>> +++ b/drivers/mtd/spi-nor/cadence-quadspi.c
>> @@ -33,6 +33,7 @@
>>   
>>   /* Quirks */
>>   #define CQSPI_NEEDS_WR_DELAY		BIT(0)
>> +#define CQSPI_DISABLE_DAC_MODE		BIT(1)
>>   
>>   /* Capabilities mask */
>>   #define CQSPI_BASE_HWCAPS_MASK					\
>> @@ -609,6 +610,13 @@ static int cqspi_write_setup(struct spi_nor *nor)
>>   	struct cqspi_st *cqspi = f_pdata->cqspi;
>>   	void __iomem *reg_base = cqspi->iobase;
>>   
>> +	/* Disable direct access controller */
>> +	if (!f_pdata->use_direct_mode) {
>> +		reg = readl(reg_base + CQSPI_REG_CONFIG);
>> +		reg &= ~CQSPI_REG_CONFIG_ENB_DIR_ACC_CTRL;
>> +		writel(reg, reg_base + CQSPI_REG_CONFIG);
>> +	}
>> +
>>   	/* Set opcode. */
>>   	reg = nor->program_opcode << CQSPI_REG_WR_INSTR_OPCODE_LSB;
>>   	writel(reg, reg_base + CQSPI_REG_WR_INSTR);
>> @@ -1328,6 +1336,7 @@ static int cqspi_probe(struct platform_device *pdev)
>>   	struct resource *res_ahb;
>>   	struct reset_control *rstc, *rstc_ocp;
>>   	const struct cqspi_driver_platdata *ddata;
>> +	struct cqspi_flash_pdata *f_pdata;
>>   	int ret;
>>   	int irq;
>>   
>> @@ -1436,6 +1445,9 @@ static int cqspi_probe(struct platform_device *pdev)
>>   		goto probe_setup_failed;
>>   	}
>>   
>> +	if (ddata && (ddata->quirks & CQSPI_DISABLE_DAC_MODE))
>> +		f_pdata->use_direct_mode = false;
>> +
> If you do this here, you will still end up acquiring a DMA channel in
> cqspi_request_mmap_dma() (called from cqspi_setup_flash()). So, please
> move the check to cqspi_setup_flash().

will fix it.

---
Regards
Vadivel
>>   	return ret;
>>   probe_setup_failed:
>>   	cqspi_controller_enable(cqspi, 0);
>> @@ -1510,6 +1522,11 @@ static const struct cqspi_driver_platdata am654_ospi = {
>>   	.quirks = CQSPI_NEEDS_WR_DELAY,
>>   };
>>   
>> +static const struct cqspi_driver_platdata intel_lgm_qspi = {
>> +	.hwcaps_mask = CQSPI_BASE_HWCAPS_MASK,
>> +	.quirks = CQSPI_DISABLE_DAC_MODE,
>> +};
>> +
>>   static const struct of_device_id cqspi_dt_ids[] = {
>>   	{
>>   		.compatible = "cdns,qspi-nor",
>> @@ -1523,6 +1540,10 @@ static const struct of_device_id cqspi_dt_ids[] = {
>>   		.compatible = "ti,am654-ospi",
>>   		.data = &am654_ospi,
>>   	},
>> +	{
>> +		.compatible = "intel,lgm-qspi",
>> +		.data = &intel_lgm_qspi,
>> +	},
>>   	{ /* end of table */ }
>>   };
>>   
>>

  reply	other threads:[~2019-10-16  8:48 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-09 10:47 [PATCH v3 0/3] mtd: cadence-qspi:add support for Intel lgm-qspi Ramuthevar,Vadivel MuruganX
2019-09-09 10:47 ` [PATCH v3 1/3] dt-bindings: " Ramuthevar,Vadivel MuruganX
2019-09-09 10:47 ` [PATCH v3 2/3] mtd: spi-nor: cadence-quadspi: Disable the DAC for Intel LGM SoC Ramuthevar,Vadivel MuruganX
2019-10-16  8:32   ` Vignesh Raghavendra
2019-10-16  8:48     ` Ramuthevar, Vadivel MuruganX [this message]
2019-09-09 10:47 ` [PATCH v3 3/3] mtd: spi-nor: cadence-quadspi: disable the auto-poll for Intel LGM Ramuthevar,Vadivel MuruganX
2019-10-16  8:40   ` Vignesh Raghavendra
2019-10-16  8:53     ` Ramuthevar, Vadivel MuruganX

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9b91e39e-a1ab-d99d-50b1-483d6acf5357@linux.intel.com \
    --to=vadivel.muruganx.ramuthevar@linux.intel.com \
    --cc=andriy.shevchenko@intel.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=cheol.yong.kim@intel.com \
    --cc=computersforpeace@gmail.com \
    --cc=cyrille.pitchen@atmel.com \
    --cc=david.oberhollenzer@sigma-star.at \
    --cc=devicetree@vger.kernel.org \
    --cc=dwmw2@infradead.org \
    --cc=jwboyer@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=qi-ming.wu@intel.com \
    --cc=richard@nod.at \
    --cc=tudor.ambarus@gmail.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).