Re: "do_IRQ: 0.89 No irq handler for vector (irq -1)"

[Dave Airlie <airlied@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 260 bytes --]

On Thu, Oct 7, 2010 at 6:55 PM, Dave Airlie <airlied@gmail.com> wrote:
> We are seeing this on both intel and radeon drivers when we reload the
> module with 2.6.36-rc7 or so, and we get no irqs for that device.

Here is complete dmesg from the machine.

Dave

[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 43108 bytes --]

Linux version 2.6.36-rc6+ (airlied@panop64.bne.redhat.com) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #107 SMP PREEMPT Wed Oct 6 13:57:05 EST 2010
Command line: ro root=/dev/sda5 3 slub_debug=FZPU
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ffa0000 (usable)
 BIOS-e820: 000000003ffa0000 - 000000003ffae000 (ACPI data)
 BIOS-e820: 000000003ffae000 - 000000003ffe0000 (ACPI NVS)
 BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x3ffa0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-DFFFF uncachable
  E0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FC0000000 write-back
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000ff780] ff780
init_memory_mapping: 0000000000000000-000000003ffa0000
 0000000000 - 003fe00000 page 2M
 003fe00000 - 003ffa0000 page 4k
kernel direct mapping tables up to 3ffa0000 @ 16000-19000
RAMDISK: 3793f000 - 37ff0000
ACPI: RSDP 00000000000fa520 00024 (v02 ACPIAM)
ACPI: XSDT 000000003ffa0100 00044 (v01 A M I  OEMXSDT  09000528 MSFT 00000097)
ACPI: FACP 000000003ffa0290 000F4 (v03 A M I  OEMFACP  09000528 MSFT 00000097)
ACPI: DSDT 000000003ffa0400 07F6D (v01  A0281 A0281034 00000034 INTL 02002026)
ACPI: FACS 000000003ffae000 00040
ACPI: APIC 000000003ffa0390 00070 (v01 A M I  OEMAPIC  09000528 MSFT 00000097)
ACPI: OEMB 000000003ffae040 00066 (v01 A M I  AMI_OEM  09000528 MSFT 00000097)
ACPI: MCFG 000000003ffa8370 0003C (v01 A M I  OEMMCFG  09000528 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880002000000-ffff880002dfffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0003ffa0
On node 0 totalpages: 261935
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3927 pages, LIFO batch:0
  DMA32 zone: 3527 pages used for memmap
  DMA32 zone: 254425 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [17000 - 177ff]
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bfb80000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff880001800000 s79488 r8192 d22912 u1048576
pcpu-alloc: s79488 r8192 d22912 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258352
Kernel command line: ro root=/dev/sda5 3 slub_debug=FZPU
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
No AGP bridge found
Subtract (45 early reservations)
  #1 [0001000000 - 00017aba7c]   TEXT DATA BSS
  #2 [003793f000 - 0037ff0000]         RAMDISK
  #3 [00017ac000 - 00017ac280]             BRK
  #4 [00000ff790 - 0000100000]   BIOS reserved
  #5 [00000ff780 - 00000ff790]    MP-table mpf
  #6 [000009fc00 - 00000f0f80]   BIOS reserved
  #7 [00000f10fc - 00000ff780]   BIOS reserved
  #8 [00000f0f80 - 00000f10fc]    MP-table mpc
  #9 [0000010000 - 0000012000]      TRAMPOLINE
  #10 [0000012000 - 0000016000]     ACPI WAKEUP
  #11 [0000016000 - 0000017000]         PGTABLE
  #12 [00017ac280 - 00017ad280]         BOOTMEM
  #13 [00017aba80 - 00017abb40]         BOOTMEM
  #14 [0001fae000 - 0001faf000]         BOOTMEM
  #15 [0001faf000 - 0001fb0000]         BOOTMEM
  #16 [0002000000 - 0002e00000]        MEMMAP 0
  #17 [00017abb40 - 00017abdc0]         BOOTMEM
  #18 [00017ad280 - 00017b7280]         BOOTMEM
  #19 [00017b8000 - 00017b9000]         BOOTMEM
  #20 [00017abdc0 - 00017abe03]         BOOTMEM
  #21 [00017b7280 - 00017b7478]         BOOTMEM
  #22 [00017abe40 - 00017abea8]         BOOTMEM
  #23 [00017abec0 - 00017abf28]         BOOTMEM
  #24 [00017abf40 - 00017abfa8]         BOOTMEM
  #25 [00017b7480 - 00017b74e8]         BOOTMEM
  #26 [00017b7500 - 00017b7568]         BOOTMEM
  #27 [00017b7580 - 00017b75e8]         BOOTMEM
  #28 [00017b7600 - 00017b7668]         BOOTMEM
  #29 [00017b7680 - 00017b76e8]         BOOTMEM
  #30 [00017abfc0 - 00017abfe0]         BOOTMEM
  #31 [00017b7700 - 00017b7724]         BOOTMEM
  #32 [00017b7740 - 00017b7764]         BOOTMEM
  #33 [0001800000 - 000181b000]         BOOTMEM
  #34 [0001900000 - 000191b000]         BOOTMEM
  #35 [00017b7780 - 00017b7788]         BOOTMEM
  #36 [00017b77c0 - 00017b77c8]         BOOTMEM
  #37 [00017b7800 - 00017b7808]         BOOTMEM
  #38 [00017b7840 - 00017b7850]         BOOTMEM
  #39 [00017b7880 - 00017b79c0]         BOOTMEM
  #40 [00017b79c0 - 00017b7a20]         BOOTMEM
  #41 [00017b7a40 - 00017b7aa0]         BOOTMEM
  #42 [00017b9000 - 00017c1000]         BOOTMEM
  #43 [000191b000 - 0001a1b000]         BOOTMEM
  #44 [000181b000 - 000189b000]         BOOTMEM
Memory: 1016824k/1048192k available (3449k kernel code, 452k absent, 30916k reserved, 3177k data, 448k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
	Verbose stalled-CPUs detection is disabled.
NR_IRQS:512
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 3000.352 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.70 BogoMIPS (lpj=3000352)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version:                0
... bit width:              40
... generic registers:      18
... value mask:             000000ffffffffff
... max period:             0000007fffffffff
... fixed-purpose events:   0
... event mask:             000000000003ffff
ACPI: Core revision 20100702
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1 Ok.
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (12000.35 BogoMIPS).
kworker/u:0 used greatest stack depth: 5472 bytes left
Time:  4:02:56  Date: 10/06/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Warning: Incorrect checksum in table [OEMB] - 0xB0, should be 0xA2 (20100702/tbutils-314)
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x40010000-0xffffffff] (ignored)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xcfdf8000-0xcfdfbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0x6000-0x601f]
pci 0000:00:1d.1: reg 20: [io  0x6400-0x641f]
pci 0000:00:1d.2: reg 20: [io  0x6800-0x681f]
pci 0000:00:1d.3: reg 20: [io  0x7000-0x701f]
pci 0000:00:1d.7: reg 10: [mem 0xcfdffc00-0xcfdfffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
pci 0000:00:1f.2: reg 10: [io  0x8800-0x8807]
pci 0000:00:1f.2: reg 14: [io  0x8400-0x8403]
pci 0000:00:1f.2: reg 18: [io  0x8000-0x8007]
pci 0000:00:1f.2: reg 1c: [io  0x7800-0x7803]
pci 0000:00:1f.2: reg 20: [io  0x7400-0x740f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
pci 0000:06:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:06:00.0: reg 18: [mem 0xcffe0000-0xcffeffff 64bit]
pci 0000:06:00.0: reg 20: [io  0xe000-0xe0ff]
pci 0000:06:00.0: reg 30: [mem 0xcffc0000-0xcffdffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.1: reg 10: [mem 0x00000000-0x00003fff 64bit]
pci 0000:06:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 06-06]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xcff00000-0xcfffffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xcfee0000-0xcfefffff]
pci 0000:04:00.0: reg 18: [io  0xc800-0xc81f]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 04-04]
pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.1:   bridge window [mem 0xcfe00000-0xcfefffff]
pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.2: PCI bridge to [bus 03-03]
pci 0000:00:1c.2:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 02-02]
pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
reserve RAM buffer: 000000003ffa0000 - 000000003fffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
system 00:08: [io  0x0290-0x0297] has been reserved
system 00:09: [io  0x04d0-0x04d1] has been reserved
system 00:09: [io  0x0800-0x087f] has been reserved
system 00:09: [io  0x0400-0x041f] has been reserved
system 00:09: [io  0x0480-0x04bf] has been reserved
system 00:09: [io  0x0900-0x090f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved
system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000dffff] has been reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0x3fffffff] could not be reserved
pci 0000:06:00.1: BAR 0: assigned [mem 0xcff00000-0xcff03fff 64bit]
pci 0000:06:00.1: BAR 0: set to [mem 0xcff00000-0xcff03fff 64bit] (PCI address [0xcff00000-0xcff03fff]
pci 0000:00:01.0: PCI bridge to [bus 06-06]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xcff00000-0xcfffffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.0:   bridge window [mem disabled]
pci 0000:00:1c.0:   bridge window [mem pref disabled]
pci 0000:00:1c.1: PCI bridge to [bus 04-04]
pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.1:   bridge window [mem 0xcfe00000-0xcfefffff]
pci 0000:00:1c.1:   bridge window [mem pref disabled]
pci 0000:00:1c.2: PCI bridge to [bus 03-03]
pci 0000:00:1c.2:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.2:   bridge window [mem disabled]
pci 0000:00:1c.2:   bridge window [mem pref disabled]
pci 0000:00:1c.3: PCI bridge to [bus 02-02]
pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.3:   bridge window [mem disabled]
pci 0000:00:1c.3:   bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:06: resource 0 [io  0xe000-0xefff]
pci_bus 0000:06: resource 1 [mem 0xcff00000-0xcfffffff]
pci_bus 0000:06: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xcfe00000-0xcfefffff]
pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 3, 49152 bytes)
UDP-Lite hash table entries: 512 (order: 3, 49152 bytes)
NET: Registered protocol family 1
pci 0000:06:00.0: Boot video device
PCI: CLS 16 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 6852k freed
DMA-API: preallocated 32768 debug entries
DMA-API: debugging enabled by kernel config
audit: initializing netlink socket (disabled)
type=2000 audit(1286337776.733:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
msgmni has been set to 1999
SELinux:  Registering netfilter hooks
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
ACPI: acpi_idle registered with cpuidle
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x8800 ctl 0x8400 bmdma 0x7400 irq 17
ata4: SATA max UDMA/133 cmd 0x8000 ctl 0x7800 bmdma 0x7408 irq 17
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Resume from disk failed.
registered taskstats version 1
  Magic number: 14:855:8
/home/airlied/git/drm-2.6/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ata3.01: ATA-7: WDC WD1600AAJS-08PSA0, 05.06H05, max UDMA/133
ata3.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.01: configured for UDMA/133
scsi 2:0:1:0: Direct-Access     ATA      WDC WD1600AAJS-0 05.0 PQ: 0 ANSI: 5
sd 2:0:1:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 2:0:1:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 448k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 640k freed
Freeing unused kernel memory: 204k freed
dracut: dracut-005-3.fc13
udev: starting version 153
udevd (657): /proc/657/oom_adj is deprecated, please use /proc/657/oom_score_adj instead.
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
radeon 0000:06:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (RV740 0x1002:0x94B3).
[drm] register mmio base: 0xCFFE0000
[drm] register mmio size: 65536
ATOM BIOS: Walden
radeon 0000:06:00.0: VRAM: 512M 0x00000000 - 0x1FFFFFFF (512M used)
radeon 0000:06:00.0: GTT: 512M 0x20000000 - 0x3FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone  kernel: Available graphics memory: 512484 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
radeon 0000:06:00.0: irq 40 for MSI/MSI-X
radeon 0000:06:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV730 Microcode
radeon 0000:06:00.0: WB enabled
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Enabling audio support
failed to evaluate ATIF got AE_BAD_PARAMETER
[drm] Default TV standard: NTSC
[drm] Default TV standard: NTSC
[drm] Default TV standard: NTSC
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   DVI-I
[drm]   HPD2
[drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[drm]   Encoders:
[drm]     CRT2: INTERNAL_KLDSCP_DAC2
[drm]     DFP2: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm]   DIN
[drm]   Encoders:
[drm]     TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm]   DVI-I
[drm]   HPD1
[drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm]     DFP1: INTERNAL_UNIPHY
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0142000
[drm] vram apper at 0xD0000000
[drm] size 7258112
[drm] fb depth is 24
[drm]    pitch is 6912
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.6.0 20080528 for 0000:06:00.0 on minor 0
modprobe used greatest stack depth: 3488 bytes left
dracut: Starting plymouth daemon
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.36-rc6+ uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006400
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.36-rc6+ uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.36-rc6+ uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 16 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xcfdffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.36-rc6+ ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 8 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00007000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.36-rc6+ uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1: new low speed USB device using uhci_hcd and address 2
dracut: Mounted root filesystem /dev/sda5
dracut: Loading SELinux policy
usb 2-1: New USB device found, idVendor=093a, idProduct=2510
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB OPTICAL MOUSE
usb 2-1: Manufacturer: PIXART
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input0
generic-usb 0003:093A:2510.0001: input: USB HID v1.10 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.1-1/input0
usb 1-1: new low speed USB device using uhci_hcd and address 2
SELinux: 2048 avtab hash slots, 200126 rules.
usb 1-1: New USB device found, idVendor=1267, idProduct=0103
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 1267:0103 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input1
generic-usb 0003:1267:0103.0002: input: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:1d.0-1/input0
input: HID 1267:0103 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/input/input2
generic-usb 0003:1267:0103.0003: input: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:1d.0-1/input1
SELinux: 2048 avtab hash slots, 200126 rules.
SELinux:  9 users, 13 roles, 3329 types, 171 bools, 1 sens, 1024 cats
SELinux:  77 classes, 200126 rules
SELinux:  Permission audit_access in class file not defined in policy.
SELinux:  Permission audit_access in class dir not defined in policy.
SELinux:  Permission execmod in class dir not defined in policy.
SELinux:  Permission audit_access in class lnk_file not defined in policy.
SELinux:  Permission open in class lnk_file not defined in policy.
SELinux:  Permission execmod in class lnk_file not defined in policy.
SELinux:  Permission audit_access in class chr_file not defined in policy.
SELinux:  Permission audit_access in class blk_file not defined in policy.
SELinux:  Permission execmod in class blk_file not defined in policy.
SELinux:  Permission audit_access in class sock_file not defined in policy.
SELinux:  Permission execmod in class sock_file not defined in policy.
SELinux:  Permission audit_access in class fifo_file not defined in policy.
SELinux:  Permission execmod in class fifo_file not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev sda5, type ext4), uses xattr
type=1403 audit(1286337781.250:2): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
readahead: starting
udev: starting version 153
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ACPI: resource 0000:00:1f.3 [io  0x0400-0x041f] conflicts with ACPI region SMRG [io  0x0400-0x040f 64bit pref disabled]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
input: PC Speaker as /devices/platform/pcspkr/input/input3
intel_rng: FWH not detected
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
sd 2:0:1:0: Attached scsi generic sg0 type 0
type=1400 audit(1286337785.593:3): avc:  denied  { mmap_zero } for  pid=1477 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
e1000e 0000:04:00.0: Disabling ASPM  L1
e1000e 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:04:00.0: setting latency timer to 64
e1000e 0000:04:00.0: irq 41 for MSI/MSI-X
e1000e 0000:04:00.0: Disabling ASPM L0s 
ppdev: user-space parallel port driver
e1000e 0000:04:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:13:d4:ff:1e:44
e1000e 0000:04:00.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:04:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC882: SKU not ready 0x411111f0
HDA Intel 0000:06:00.1: enabling device (0000 -> 0002)
HDA Intel 0000:06:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:06:00.1: irq 43 for MSI/MSI-X
HDA Intel 0000:06:00.1: setting latency timer to 64
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda2): using internal journal
EXT3-fs (sda2): mounted filesystem with writeback data mode
SELinux: initialized (dev sda2, type ext3), uses xattr
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with writeback data mode
SELinux: initialized (dev sda1, type ext3), uses xattr
type=1400 audit(1286337791.700:4): avc:  denied  { write } for  pid=1736 comm="quotaon" path="/dev/pts/0" dev=devpts ino=3 scontext=system_u:system_r:quota_t:s0 tcontext=system_u:object_r:devpts_t:s0 tclass=chr_file
Adding 1052252k swap on /dev/sda3.  Priority:-1 extents:1 across:1052252k 
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (8007 buckets, 32028 max)
e1000e 0000:04:00.0: irq 41 for MSI/MSI-X
e1000e 0000:04:00.0: irq 41 for MSI/MSI-X
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
type=1400 audit(1286337804.166:5): avc:  denied  { module_request } for  pid=2150 comm="rpc.statd" kmod="net-pf-10" scontext=system_u:system_r:rpcd_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
type=1400 audit(1286337807.668:6): avc:  denied  { module_request } for  pid=2389 comm="sshd" kmod="net-pf-10" scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:system_r:kernel_t:s0 tclass=system
type=1400 audit(1286337807.814:7): avc:  denied  { module_request } for  pid=2409 comm="sendmail" kmod="net-pf-10" scontext=system_u:system_r:sendmail_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system
type=1400 audit(1286337865.890:8): avc:  denied  { module_request } for  pid=2585 comm="sshd" kmod="net-pf-10" scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:system_r:kernel_t:s0 tclass=system
type=1400 audit(1286337866.412:9): avc:  denied  { module_request } for  pid=2590 comm="sshd" kmod="net-pf-10" scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:system_r:kernel_t:s0 tclass=system
type=1400 audit(1286337909.603:10): avc:  denied  { module_request } for  pid=2849 comm="canberra-gtk-pl" kmod="net-pf-10" scontext=system_u:system_r:xdm_t:s0-s0:c0.c1023 tcontext=system_u:system_r:kernel_t:s0 tclass=system
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
fuse init (API version 7.15)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
flush-8:0 used greatest stack depth: 3472 bytes left
type=1400 audit(1286339422.009:11): avc:  denied  { module_request } for  pid=3416 comm="sshd" kmod="net-pf-10" scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:system_r:kernel_t:s0 tclass=system
type=1400 audit(1286339559.001:12): avc:  denied  { module_request } for  pid=3776 comm="sshd" kmod="net-pf-10" scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:system_r:kernel_t:s0 tclass=system
type=1400 audit(1286404212.575:13): avc:  denied  { module_request } for  pid=10255 comm="sshd" kmod="net-pf-10" scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:system_r:kernel_t:s0 tclass=system
type=1400 audit(1286404213.383:14): avc:  denied  { module_request } for  pid=10261 comm="sshd" kmod="net-pf-10" scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:system_r:kernel_t:s0 tclass=system
hub 1-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
usb 1-1: USB disconnect, address 2
usb 1-1: new low speed USB device using uhci_hcd and address 3
usb 1-1: New USB device found, idVendor=1267, idProduct=0103
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 1267:0103 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input6
generic-usb 0003:1267:0103.0004: input: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:1d.0-1/input0
input: HID 1267:0103 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/input/input7
generic-usb 0003:1267:0103.0005: input: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:1d.0-1/input1
type=1400 audit(1286415036.060:15): avc:  denied  { module_request } for  pid=11907 comm="sshd" kmod="net-pf-10" scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:system_r:kernel_t:s0 tclass=system
type=1400 audit(1286415036.518:16): avc:  denied  { module_request } for  pid=11913 comm="sshd" kmod="net-pf-10" scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:system_r:kernel_t:s0 tclass=system
type=1400 audit(1286420177.971:17): avc:  denied  { module_request } for  pid=22896 comm="sshd" kmod="net-pf-10" scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:system_r:kernel_t:s0 tclass=system
type=1400 audit(1286420179.138:18): avc:  denied  { module_request } for  pid=22902 comm="sshd" kmod="net-pf-10" scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:system_r:kernel_t:s0 tclass=system
type=1400 audit(1286432078.346:19): avc:  denied  { module_request } for  pid=1313 comm="sshd" kmod="net-pf-10" scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:system_r:kernel_t:s0 tclass=system
type=1400 audit(1286432079.751:20): avc:  denied  { module_request } for  pid=1338 comm="sshd" kmod="net-pf-10" scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:system_r:kernel_t:s0 tclass=system
type=1400 audit(1286441301.607:21): avc:  denied  { module_request } for  pid=4357 comm="sshd" kmod="net-pf-10" scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:system_r:kernel_t:s0 tclass=system
Console: switching to colour VGA+ 80x25
drm: unregistered panic notifier
[drm] radeon: finishing device.
radeon 0000:06:00.0: ffff88003c952f18 unpin not necessary
[TTM] Finalizing pool allocator.
[TTM] Zone  kernel: Used memory at exit: 1024 kiB.
[drm] radeon: ttm finalized
[drm] Module unloaded
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:06:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (RV740 0x1002:0x94B3).
[drm] register mmio base: 0xCFFE0000
[drm] register mmio size: 65536
ATOM BIOS: Walden
radeon 0000:06:00.0: VRAM: 512M 0x00000000 - 0x1FFFFFFF (512M used)
radeon 0000:06:00.0: GTT: 512M 0x20000000 - 0x3FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone  kernel: Available graphics memory: 512484 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
radeon 0000:06:00.0: irq 40 for MSI/MSI-X
radeon 0000:06:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV730 Microcode
radeon 0000:06:00.0: WB enabled
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
do_IRQ: 0.89 No irq handler for vector (irq -1)
[drm] ib test succeeded in 0 usecs
[drm] Enabling audio support
failed to evaluate ATIF got AE_BAD_PARAMETER
[drm] Default TV standard: NTSC
[drm] Default TV standard: NTSC
[drm] Default TV standard: NTSC
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   DVI-I
[drm]   HPD2
[drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[drm]   Encoders:
[drm]     CRT2: INTERNAL_KLDSCP_DAC2
[drm]     DFP2: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm]   DIN
[drm]   Encoders:
[drm]     TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm]   DVI-I
[drm]   HPD1
[drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm]     DFP1: INTERNAL_UNIPHY
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0142000
[drm] vram apper at 0xD0000000
[drm] size 7258112
[drm] fb depth is 24
[drm]    pitch is 6912
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.6.0 20080528 for 0000:06:00.0 on minor 0