From: Chris Chiu <chiu@endlessm.com>
To: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: Daniel Drake <drake@endlessm.com>,
Jian-Hong Pan <jian-hong@endlessm.com>,
Jiri Kosina <jikos@kernel.org>,
Benjamin Tissoires <benjamin.tissoires@redhat.com>,
Jani Nikula <jani.nikula@intel.com>,
Hans de Goede <hdegoede@redhat.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Adrian Salido <salidoa@google.com>,
Jason Gerecke <killertofu@gmail.com>,
linux-input <linux-input@vger.kernel.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Wolfram Sang <wsa@the-dreams.de>,
linux-i2c@vger.kernel.org,
Linux Kernel <linux-kernel@vger.kernel.org>,
Linux Upstreaming Team <linux@endlessm.com>
Subject: Re: [BUG] i2c-hid: ELAN Touchpad does not work on ASUS X580GD
Date: Tue, 15 May 2018 11:22:54 +0800 [thread overview]
Message-ID: <CAB4CAwe6kjJ10s0KtVJrPMSC8UA+YLCiqbnkZ_-oFTKTFPTwCw@mail.gmail.com> (raw)
In-Reply-To: <c1343704-6b1a-14b5-3942-a8a33f73feee@linux.intel.com>
On Mon, May 14, 2018 at 10:20 PM, Jarkko Nikula
<jarkko.nikula@linux.intel.com> wrote:
> On 05/10/2018 03:03 PM, Chris Chiu wrote:
>>
>> Report from guys who can access scope. If i2c-sda-falling-time-ns=400ns
>> , HCNT increase to 117, the SCL high duration is 576ns as follows
>> https://pasteboard.co/HkwERvP.png
>>
>> The original SCL high duration (HCNT = 105, 120MHz) is as follows
>> https://pasteboard.co/HkwFxgY.png
>>
>> So the HCNT does affect but per this HCNT/LCNT value, just not 400kHz
>> as expected. Any suggestion?
>>
> Thanks for measurements. I was sidetracked last week so I don't have yet
> explanation why signals run faster than expected :-(
>
> Using 120 MHz SPT I2C clocks in commit b418bbff36dd ("mfd: intel-lpss: Add
> Intel Cannonlake PCI IDs") is clearly wrong but before going to 133 MHz
> (which work for you but still runs too fast) I would like to find
> explanation why it appears to be much higher.
>
> --
> Jarkko
What if I change the 120MHz to 180MHz and then make sure that the I2C operates
in target FS mode frequency 400kHz via scope? Would there be any side effect?
Maybe some other busses frequency could be also affected and causing some other
component malfunction?
Chris
next prev parent reply other threads:[~2018-05-15 3:23 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-04 6:55 [BUG] i2c-hid: ELAN Touchpad does not work on ASUS X580GD Jian-Hong Pan
2018-05-07 8:07 ` Chris Chiu
2018-05-08 14:31 ` Jarkko Nikula
2018-05-08 15:47 ` Daniel Drake
2018-05-10 12:03 ` Chris Chiu
2018-05-14 14:20 ` Jarkko Nikula
2018-05-15 3:22 ` Chris Chiu [this message]
2018-05-15 10:20 ` Jarkko Nikula
2018-05-17 7:48 ` Jarkko Nikula
2018-05-17 9:05 ` Chris Chiu
2018-05-18 7:48 ` Hans de Goede
2018-05-18 8:37 ` Andy Shevchenko
2018-05-18 10:20 ` Andy Shevchenko
2018-05-18 10:58 ` Jarkko Nikula
2018-05-18 13:09 ` Hans de Goede
2018-05-18 13:15 ` Jarkko Nikula
2018-05-18 13:26 ` Hans de Goede
2018-05-19 11:58 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAB4CAwe6kjJ10s0KtVJrPMSC8UA+YLCiqbnkZ_-oFTKTFPTwCw@mail.gmail.com \
--to=chiu@endlessm.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=benjamin.tissoires@redhat.com \
--cc=dmitry.torokhov@gmail.com \
--cc=drake@endlessm.com \
--cc=hdegoede@redhat.com \
--cc=jani.nikula@intel.com \
--cc=jarkko.nikula@linux.intel.com \
--cc=jian-hong@endlessm.com \
--cc=jikos@kernel.org \
--cc=killertofu@gmail.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@endlessm.com \
--cc=mika.westerberg@linux.intel.com \
--cc=salidoa@google.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).