linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonas Falkevik <jonas.falkevik@gmail.com>
To: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>,
	Neil Horman <nhorman@tuxdriver.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	linux-sctp@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, Xin Long <lucien.xin@gmail.com>
Subject: Re: [PATCH] sctp: check assoc before SCTP_ADDR_{MADE_PRIM,ADDED} event
Date: Fri, 15 May 2020 10:30:29 +0200	[thread overview]
Message-ID: <CABUN9aBoxXjdPk9piKAZV-2dYOCEnuXr-4H5ZVVvqeMMFRsf7A@mail.gmail.com> (raw)
In-Reply-To: <20200513213230.GE2491@localhost.localdomain>

On Wed, May 13, 2020 at 11:32 PM Marcelo Ricardo Leitner
<marcelo.leitner@gmail.com> wrote:
>
> On Wed, May 13, 2020 at 10:11:05PM +0200, Jonas Falkevik wrote:
> > On Wed, May 13, 2020 at 6:01 PM Marcelo Ricardo Leitner
> > <marcelo.leitner@gmail.com> wrote:
> > >
> > > On Wed, May 13, 2020 at 04:52:16PM +0200, Jonas Falkevik wrote:
> > > > Do not generate SCTP_ADDR_{MADE_PRIM,ADDED} events for SCTP_FUTURE_ASSOC assocs.
> > >
> > > How did you get them?
> > >
> >
> > I think one case is when receiving INIT chunk in sctp_sf_do_5_1B_init().
> > Here a closed association is created, sctp_make_temp_assoc().
> > Which is later used when calling sctp_process_init().
> > In sctp_process_init() one of the first things are to call
> > sctp_assoc_add_peer()
> > on the closed / temp assoc.
> >
> > sctp_assoc_add_peer() are generating the SCTP_ADDR_ADDED event on the socket
> > for the potentially new association.
>
> I see, thanks. The SCTP_FUTURE_ASSOC means something different. It is
> for setting/getting socket options that will be used for new asocs. In
> this case, it is just a coincidence that asoc_id is not set (but
> initialized to 0) and SCTP_FUTURE_ASSOC is also 0.

yes, you are right, I overlooked that.

> Moreso, if I didn't
> miss anything, it would block valid events, such as those from
>  sctp_sf_do_5_1D_ce
>    sctp_process_init
> because sctp_process_init will only call sctp_assoc_set_id() by its
> end.

Do we want these events at this stage?
Since the association is a newly established one, have the peer address changed?
Should we enqueue these messages with sm commands instead?
And drop them if we don't have state SCTP_STATE_ESTABLISHED?

>
> I can't see a good reason for generating any event on temp assocs. So
> I'm thinking the checks on this patch should be on whether the asoc is
> a temporary one instead. WDYT?
>

Agree, we shouldn't rely on coincidence.
Either check temp instead or the above mentioned state?

> Then, considering the socket is locked, both code points should be
> allocating the IDR earlier. It's expensive, yes (point being, it could
> be avoided in case of other failures), but it should be generating
> events with the right assoc id. Are you interested in pursuing this
> fix as well?

Sure.

If we check temp status instead, we would need to allocate IDR earlier,
as you mention. So that we send the notification with correct assoc id.

But shouldn't the SCTP_COMM_UP, for a newly established association, be the
first notification event sent?
The SCTP_COMM_UP notification is enqueued later in sctp_sf_do_5_1D_ce().


>
> >
> > $ cat sctp.bpftrace
> > #!/usr/local/bin/bpftrace
> >
> > BEGIN
> > {
> >    printf("Tracing sctp_assoc_add_peer\n");
> >    printf("Hit Ctrl-C to end.\n");
> > }
> >
> > kprobe:sctp_assoc_add_peer
> > {
> >    @[kstack]=count();
> > }
> >
> > $ sudo bpftrace sctp.bpftrace
> > Attaching 2 probes...
> > Tracing sctp_assoc_add_peer
> > Hit Ctrl-C to end.
> > ^C
> >
> > @[
> >    sctp_assoc_add_peer+1
> >    sctp_process_init+77
> >    sctp_sf_do_5_1B_init+615
> >    sctp_do_sm+132
> >    sctp_endpoint_bh_rcv+256
> >    sctp_rcv+2379
> >    ip_protocol_deliver_rcu+393
> >    ip_local_deliver_finish+68
> >    ip_local_deliver+203
> >    ip_rcv+156
> >    __netif_receive_skb_one_core+96
> >    process_backlog+164
> >    net_rx_action+312
> >    __softirqentry_text_start+238
> >    do_softirq_own_stack+42
> >    do_softirq.part.0+65
> >    __local_bh_enable_ip+75
> >    ip_finish_output2+415
> >    ip_output+102
> >    __ip_queue_xmit+364
> >    sctp_packet_transmit+1814
> >    sctp_outq_flush_ctrl.constprop.0+394
> >    sctp_outq_flush+86
> >    sctp_do_sm+3914
> >    sctp_primitive_ASSOCIATE+44
> >    __sctp_connect+707
> >    sctp_inet_connect+98
> >    __sys_connect+156
> >    __x64_sys_connect+22
> >    do_syscall_64+91
> >    entry_SYSCALL_64_after_hwframe+68
> > ]: 1
> > ...
> >
> > > I'm thinking you're fixing a side-effect of another issue here. For
> > > example, in sctp_assoc_update(), it first calls sctp_assoc_add_peer()
> > > to only then call sctp_assoc_set_id(), which would generate the event
> > > you might have seen. In this case, it should be allocating IDR before,
> > > so that the event can be sent with the right assoc_id already.
> > >
> > > >
> > > > These events are described in rfc6458#section-6.1
> > > > SCTP_PEER_ADDR_CHANGE:
> > > > This tag indicates that an address that is
> > > > part of an existing association has experienced a change of
> > > > state (e.g., a failure or return to service of the reachability
> > > > of an endpoint via a specific transport address).
> > > >
> > > > Signed-off-by: Jonas Falkevik <jonas.falkevik@gmail.com>
> > > > ---
> > > >  net/sctp/associola.c | 11 ++++++++---
> > > >  1 file changed, 8 insertions(+), 3 deletions(-)
> > > >
> > > > diff --git a/net/sctp/associola.c b/net/sctp/associola.c
> > > > index 437079a4883d..0c5dd295f9b8 100644
> > > > --- a/net/sctp/associola.c
> > > > +++ b/net/sctp/associola.c
> > > > @@ -432,8 +432,10 @@ void sctp_assoc_set_primary(struct sctp_association *asoc,
> > > >          changeover = 1 ;
> > > >
> > > >      asoc->peer.primary_path = transport;
> > > > -    sctp_ulpevent_nofity_peer_addr_change(transport,
> > > > -                          SCTP_ADDR_MADE_PRIM, 0);
> > > > +    if (sctp_assoc2id(asoc) != SCTP_FUTURE_ASSOC)
> > > > +        sctp_ulpevent_nofity_peer_addr_change(transport,
> > > > +                              SCTP_ADDR_MADE_PRIM,
> > > > +                              0);
> > > >
> > > >      /* Set a default msg_name for events. */
> > > >      memcpy(&asoc->peer.primary_addr, &transport->ipaddr,
> > > > @@ -714,7 +716,10 @@ struct sctp_transport *sctp_assoc_add_peer(struct
> > > > sctp_association *asoc,
> > > >      list_add_tail_rcu(&peer->transports, &asoc->peer.transport_addr_list);
> > > >      asoc->peer.transport_count++;
> > > >
> > > > -    sctp_ulpevent_nofity_peer_addr_change(peer, SCTP_ADDR_ADDED, 0);
> > > > +    if (sctp_assoc2id(asoc) != SCTP_FUTURE_ASSOC)
> > > > +        sctp_ulpevent_nofity_peer_addr_change(peer,
> > > > +                              SCTP_ADDR_ADDED,
> > > > +                              0);
> > > >
> > > >      /* If we do not yet have a primary path, set one.  */
> > > >      if (!asoc->peer.primary_path) {
> > > > --
> > > > 2.25.3

  reply	other threads:[~2020-05-15  8:30 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-13 14:52 [PATCH] sctp: check assoc before SCTP_ADDR_{MADE_PRIM,ADDED} event Jonas Falkevik
2020-05-13 16:01 ` Marcelo Ricardo Leitner
2020-05-13 20:11   ` Jonas Falkevik
2020-05-13 21:32     ` Marcelo Ricardo Leitner
2020-05-15  8:30       ` Jonas Falkevik [this message]
2020-05-19 20:42         ` Marcelo Ricardo Leitner
2020-05-23 12:04           ` Jonas Falkevik
2020-05-25  8:42             ` Xin Long
2020-05-25 13:10               ` Marcelo Ricardo Leitner
2020-05-25 16:17                 ` Xin Long
2020-05-25 20:49                   ` Jonas Falkevik
2020-05-25 20:52                     ` Marcelo Ricardo Leitner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CABUN9aBoxXjdPk9piKAZV-2dYOCEnuXr-4H5ZVVvqeMMFRsf7A@mail.gmail.com \
    --to=jonas.falkevik@gmail.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sctp@vger.kernel.org \
    --cc=lucien.xin@gmail.com \
    --cc=marcelo.leitner@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=nhorman@tuxdriver.com \
    --cc=vyasevich@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).