From: Prashant Malani <pmalani@chromium.org>
To: Enric Balletbo Serra <eballetbo@gmail.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>,
Benson Leung <bleung@chromium.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/4] platform/chrome: Add EC command msg wrapper
Date: Thu, 30 Jan 2020 12:38:30 -0800 [thread overview]
Message-ID: <CACeCKafv4xmX6NLash-dBDt2N=TRumkMiz8ZgW-fvBF1vDM=Qg@mail.gmail.com> (raw)
In-Reply-To: <CACeCKaewsKMLbO=N2hY5Gen075ZuVmSb8A=A1gQ7SWFvoF7M2w@mail.gmail.com>
Hi Enric,
Here is the series: https://www.spinics.net/lists/kernel/msg3392039.html
Thanks!
On Tue, Jan 28, 2020 at 12:58 PM Prashant Malani <pmalani@chromium.org> wrote:
>
>
>
> On Tue, Jan 28, 2020 at 12:57 PM Enric Balletbo Serra <eballetbo@gmail.com> wrote:
>>
>> Missatge de Prashant Malani <pmalani@chromium.org> del dia dt., 28 de
>> gen. 2020 a les 20:29:
>> >
>> > Hi Enric,
>> >
>> > On Mon, Jan 27, 2020 at 12:36 PM Enric Balletbo Serra
>> > <eballetbo@gmail.com> wrote:
>> > >
>> > > Hi Prashant,
>> > >
>> > > Missatge de Prashant Malani <pmalani@chromium.org> del dia dl., 27 de
>> > > gen. 2020 a les 18:13:
>> > > >
>> > > > Hi Enric,
>> > > >
>> > > > On Mon, Jan 27, 2020 at 7:29 AM Enric Balletbo i Serra
>> > > > <enric.balletbo@collabora.com> wrote:
>> > > > >
>> > > > > Hi Prashant,
>> > > > >
>> > > > > Many thanks for this patch.
>> > > > >
>> > > > > On 25/1/20 2:21, Prashant Malani wrote:
>> > > > > > Many callers of cros_ec_cmd_xfer_status() use a similar set up of
>> > > > > > allocating and filling a message buffer and then copying any received
>> > > > > > data to a target buffer.
>> > > > > >
>> > > > >
>> > > > > cros_ec_cmd_xfer_status is already a wrapper, I dislike the idea of having three
>> > > > > ways to do the same (cros_ec_cmd_xfer, cros_ec_cmd_xfer_status and this new
>> > > > > one). I like the idea of have a wrapper that embeds the message allocation but
>> > > > > we should not confuse users with different calls that does the same.
>> > > > Yes, my intention was to eventually replace all the xfer_status()
>> > > > call-sites to use the new wrapper, and then get rid of xfer_status
>> > > > completely.
>> > > > >
>> > > > > So, I am for a change like this but I'd like to have all the users calling the
>> > > > > same wrapper (unless there is a good reason to not use it). A proposed roadmap
>> > > > > (to be discussed) for this would be.
>> > > > >
>> > > > > 1. Replace all the remaining "cros_ec_cmd_xfer" calls with
>> > > > > "cros_ec_cmd_xfer_status".
>> > > > > 2. Modify cros_ec_cmd_xfer_status to embed the message allocation.
>> > > >
>> > > > How about the following alteration the the roadmap:
>> > > > - Introducing the new wrapper.
>> > > > - Replacing all remaining cros_ec_cmd_xfer/cros_ec_cmd_xfer_status to
>> > > > use the new wrapper.
>> > > > - Deleting cros_ec_cmd_xfer and cros_ec_cmd_xfer_status ?
>> > > > My thinking is that this would mean fewer changes at the call-sites
>> > > > compared to the original roadmap (in the original roadmap, one would
>> > > > first have to modify calls to use cros_ec_cmd_xfer_status(), and then
>> > > > modify them again when cros_ec_cmd_xfer_status() itself is modified to
>> > > > include message allocation).
>> > > >
>> > >
>> > > Sounds like we have a plan, looks good to me.
>> > >
>> > Great. Can we use the current series as a starting point for this ?
>>
>> I'd prefer have all the replacements in the same series.
>
> Thanks for the clarification. I'll work on this.
>
> Best,
>
> -Prashant
>>
>>
>> > I've identified some of the other places which use
>> > cros_ec_cmd_xfer_status() so can submit subsequent series to convert
>> > those.
>> > > Cheers,
>> > > Enric
>> > >
>> > > > That said I don't have any strong preference, so either would work.
>> > > >
>> > > > Best regards,
>> > > > >
>> > > > > Thanks,
>> > > > > Enric
>> > > > >
>> > > > >
>> > > > > > Create a utility function that performs this setup so that callers can
>> > > > > > use this function instead.
>> > > > > >
>> > > > > > Signed-off-by: Prashant Malani <pmalani@chromium.org>
>> > > > > > ---
>> > > > > > drivers/platform/chrome/cros_ec_proto.c | 53 +++++++++++++++++++++
>> > > > > > include/linux/platform_data/cros_ec_proto.h | 5 ++
>> > > > > > 2 files changed, 58 insertions(+)
>> > > > > >
>> > > > > > diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
>> > > > > > index da1b1c4504333..8ef3b7d27d260 100644
>> > > > > > --- a/drivers/platform/chrome/cros_ec_proto.c
>> > > > > > +++ b/drivers/platform/chrome/cros_ec_proto.c
>> > > > > > @@ -5,6 +5,7 @@
>> > > > > >
>> > > > > > #include <linux/delay.h>
>> > > > > > #include <linux/device.h>
>> > > > > > +#include <linux/mfd/cros_ec.h>
>> > > > > > #include <linux/module.h>
>> > > > > > #include <linux/platform_data/cros_ec_commands.h>
>> > > > > > #include <linux/platform_data/cros_ec_proto.h>
>> > > > > > @@ -570,6 +571,58 @@ int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
>> > > > > > }
>> > > > > > EXPORT_SYMBOL(cros_ec_cmd_xfer_status);
>> > > > > >
>> > > > > > +/**
>> > > > > > + * cros_ec_send_cmd_msg() - Utility function to send commands to ChromeOS EC.
>> > > > > > + * @ec: EC device struct.
>> > > > > > + * @version: Command version number (often 0).
>> > > > > > + * @command: Command ID including offset.
>> > > > > > + * @outdata: Data to be sent to the EC.
>> > > > > > + * @outsize: Size of the &outdata buffer.
>> > > > > > + * @indata: Data to be received from the EC.
>> > > > > > + * @insize: Size of the &indata buffer.
>> > > > > > + *
>> > > > > > + * This function is a wrapper around &cros_ec_cmd_xfer_status, and performs
>> > > > > > + * some of the common work involved with sending a command to the EC. This
>> > > > > > + * includes allocating and filling up a &struct cros_ec_command message buffer,
>> > > > > > + * and copying the received data to another buffer.
>> > > > > > + *
>> > > > > > + * Return: The number of bytes transferred on success or negative error code.
>> > > > > > + */
>> > > > > > +int cros_ec_send_cmd_msg(struct cros_ec_device *ec, unsigned int version,
>> > > > > > + unsigned int command, void *outdata,
>> > > > > > + unsigned int outsize, void *indata,
>> > > > > > + unsigned int insize)
>> > > > > > +{
>> > > > > > + struct cros_ec_command *msg;
>> > > > > > + int ret;
>> > > > > > +
>> > > > > > + msg = kzalloc(sizeof(*msg) + max(outsize, insize), GFP_KERNEL);
>> > > > > > + if (!msg)
>> > > > > > + return -ENOMEM;
>> > > > > > +
>> > > > > > + msg->version = version;
>> > > > > > + msg->command = command;
>> > > > > > + msg->outsize = outsize;
>> > > > > > + msg->insize = insize;
>> > > > > > +
>> > > > > > + if (outdata && outsize > 0)
>> > > > > > + memcpy(msg->data, outdata, outsize);
>> > > > > > +
>> > > > > > + ret = cros_ec_cmd_xfer_status(ec, msg);
>> > > > > > + if (ret < 0) {
>> > > > > > + dev_warn(ec->dev, "Command failed: %d\n", msg->result);
>> > > > > > + goto cleanup;
>> > > > > > + }
>> > > > > > +
>> > > > > > + if (insize)
>> > > > > > + memcpy(indata, msg->data, insize);
>> > > > > > +
>> > > > > > +cleanup:
>> > > > > > + kfree(msg);
>> > > > > > + return ret;
>> > > > > > +}
>> > > > > > +EXPORT_SYMBOL(cros_ec_send_cmd_msg);
>> > > > > > +
>> > > > > > static int get_next_event_xfer(struct cros_ec_device *ec_dev,
>> > > > > > struct cros_ec_command *msg,
>> > > > > > struct ec_response_get_next_event_v1 *event,
>> > > > > > diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h
>> > > > > > index 30098a5515231..166ce26bdd79e 100644
>> > > > > > --- a/include/linux/platform_data/cros_ec_proto.h
>> > > > > > +++ b/include/linux/platform_data/cros_ec_proto.h
>> > > > > > @@ -201,6 +201,11 @@ int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
>> > > > > > int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
>> > > > > > struct cros_ec_command *msg);
>> > > > > >
>> > > > > > +int cros_ec_send_cmd_msg(struct cros_ec_device *ec_dev, unsigned int version,
>> > > > > > + unsigned int command, void *outdata,
>> > > > > > + unsigned int outsize, void *indata,
>> > > > > > + unsigned int insize);
>> > > > > > +
>> > > > > > int cros_ec_register(struct cros_ec_device *ec_dev);
>> > > > > >
>> > > > > > int cros_ec_unregister(struct cros_ec_device *ec_dev);
>> > > > > >
next prev parent reply other threads:[~2020-01-30 20:38 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-25 1:21 [PATCH 0/4] Factor out cmd_xfer_status() setup code Prashant Malani
2020-01-25 1:21 ` [PATCH 1/4] platform/chrome: Add EC command msg wrapper Prashant Malani
2020-01-27 15:29 ` Enric Balletbo i Serra
2020-01-27 17:11 ` Prashant Malani
2020-01-27 20:35 ` Enric Balletbo Serra
2020-01-28 19:29 ` Prashant Malani
2020-01-28 20:57 ` Enric Balletbo Serra
2020-01-28 22:44 ` Prashant Malani
[not found] ` <CACeCKaewsKMLbO=N2hY5Gen075ZuVmSb8A=A1gQ7SWFvoF7M2w@mail.gmail.com>
2020-01-30 20:38 ` Prashant Malani [this message]
2020-01-25 1:21 ` [PATCH 2/4] platform/chrome: Make chardev use send_cmd_msg Prashant Malani
2020-01-25 1:21 ` [PATCH 3/4] platform/chrome: Use send_cmd_msg in debugfs Prashant Malani
2020-01-25 1:21 ` [PATCH 4/4] platform/chrome: Make check_features() use wrapper Prashant Malani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CACeCKafv4xmX6NLash-dBDt2N=TRumkMiz8ZgW-fvBF1vDM=Qg@mail.gmail.com' \
--to=pmalani@chromium.org \
--cc=bleung@chromium.org \
--cc=eballetbo@gmail.com \
--cc=enric.balletbo@collabora.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).