From: Ammar Faizi <ammarfaizi2@gnuweeb.org>
To: Drew DeVault <sir@cmpwn.com>
Cc: linux-kernel@vger.kernel.org, linux-api@vger.kernel.org,
io_uring Mailing List <io-uring@vger.kernel.org>,
Jens Axboe <axboe@kernel.dk>,
Pavel Begunkov <asml.silence@gmail.com>
Subject: Re: [PATCH] Increase default MLOCK_LIMIT to 8 MiB
Date: Sat, 6 Nov 2021 09:33:10 +0700 [thread overview]
Message-ID: <CAFBCWQ+=2T4U7iNQz_vsBsGVQ72s+QiECndy_3AMFV98bMOLow@mail.gmail.com> (raw)
In-Reply-To: <20211028080813.15966-1-sir@cmpwn.com>
On Thu, Oct 28, 2021 at 3:08 PM Drew DeVault wrote:
>
> This limit has not been updated since 2008, when it was increased to 64
> KiB at the request of GnuPG. Until recently, the main use-cases for this
> feature were (1) preventing sensitive memory from being swapped, as in
> GnuPG's use-case; and (2) real-time use-cases. In the first case, little
> memory is called for, and in the second case, the user is generally in a
> position to increase it if they need more.
>
> The introduction of IOURING_REGISTER_BUFFERS adds a third use-case:
> preparing fixed buffers for high-performance I/O. This use-case will
> take as much of this memory as it can get, but is still limited to 64
> KiB by default, which is very little. This increases the limit to 8 MB,
> which was chosen fairly arbitrarily as a more generous, but still
> conservative, default value.
> ---
> It is also possible to raise this limit in userspace. This is easily
> done, for example, in the use-case of a network daemon: systemd, for
> instance, provides for this via LimitMEMLOCK in the service file; OpenRC
> via the rc_ulimit variables. However, there is no established userspace
> facility for configuring this outside of daemons: end-user applications
> do not presently have access to a convenient means of raising their
> limits.
>
> The buck, as it were, stops with the kernel. It's much easier to address
> it here than it is to bring it to hundreds of distributions, and it can
> only realistically be relied upon to be high-enough by end-user software
> if it is more-or-less ubiquitous. Most distros don't change this
> particular rlimit from the kernel-supplied default value, so a change
> here will easily provide that ubiquity.
>
> include/uapi/linux/resource.h | 13 ++++++++++---
> 1 file changed, 10 insertions(+), 3 deletions(-)
Forgot to add Signed-off-by tag from the author?
--
Ammar Faizi
next prev parent reply other threads:[~2021-11-06 2:41 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-28 8:08 [PATCH] Increase default MLOCK_LIMIT to 8 MiB Drew DeVault
2021-10-28 18:22 ` Jens Axboe
2021-11-04 14:27 ` Cyril Hrubis
2021-11-04 14:44 ` Jens Axboe
2021-11-06 2:33 ` Ammar Faizi [this message]
2021-11-06 7:05 ` Drew DeVault
2021-11-06 7:12 ` Ammar Faizi
2021-11-16 4:35 ` Andrew Morton
2021-11-16 6:32 ` Drew DeVault
2021-11-16 19:47 ` Andrew Morton
2021-11-16 19:48 ` Drew DeVault
2021-11-16 21:37 ` Andrew Morton
2021-11-17 8:23 ` Drew DeVault
2021-11-22 17:11 ` David Hildenbrand
2021-11-22 17:55 ` Andrew Dona-Couch
2021-11-22 18:26 ` David Hildenbrand
2021-11-22 19:53 ` Jens Axboe
2021-11-22 20:03 ` Matthew Wilcox
2021-11-22 20:04 ` Jens Axboe
2021-11-22 20:08 ` David Hildenbrand
2021-11-22 20:44 ` Jens Axboe
2021-11-22 21:56 ` David Hildenbrand
2021-11-23 12:02 ` David Hildenbrand
2021-11-23 13:25 ` Jason Gunthorpe
2021-11-23 13:39 ` David Hildenbrand
2021-11-23 14:07 ` Jason Gunthorpe
2021-11-23 14:44 ` David Hildenbrand
2021-11-23 17:00 ` Jason Gunthorpe
2021-11-23 17:04 ` David Hildenbrand
2021-11-23 22:04 ` Vlastimil Babka
2021-11-23 23:59 ` Jason Gunthorpe
2021-11-24 8:57 ` David Hildenbrand
2021-11-24 13:23 ` Jason Gunthorpe
2021-11-24 13:25 ` David Hildenbrand
2021-11-24 13:28 ` Jason Gunthorpe
2021-11-24 13:29 ` David Hildenbrand
2021-11-24 13:48 ` Jason Gunthorpe
2021-11-24 14:14 ` David Hildenbrand
2021-11-24 15:34 ` Jason Gunthorpe
2021-11-24 16:43 ` David Hildenbrand
2021-11-24 18:35 ` Jason Gunthorpe
2021-11-24 19:09 ` David Hildenbrand
2021-11-24 23:11 ` Jason Gunthorpe
2021-11-30 15:52 ` David Hildenbrand
2021-11-24 18:37 ` David Hildenbrand
2021-11-24 14:37 ` Vlastimil Babka
2021-11-24 14:41 ` David Hildenbrand
2021-11-16 18:36 ` Matthew Wilcox
2021-11-16 18:44 ` Drew DeVault
2021-11-16 18:55 ` Jens Axboe
2021-11-16 19:21 ` Vito Caputo
2021-11-16 19:25 ` Drew DeVault
2021-11-16 19:46 ` Vito Caputo
2021-11-16 19:41 ` Jens Axboe
2021-11-17 22:26 ` Johannes Weiner
2021-11-17 23:17 ` Jens Axboe
2021-11-18 21:58 ` Andrew Morton
2021-11-19 7:41 ` Drew DeVault
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAFBCWQ+=2T4U7iNQz_vsBsGVQ72s+QiECndy_3AMFV98bMOLow@mail.gmail.com' \
--to=ammarfaizi2@gnuweeb.org \
--cc=asml.silence@gmail.com \
--cc=axboe@kernel.dk \
--cc=io-uring@vger.kernel.org \
--cc=linux-api@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sir@cmpwn.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).