Re: [PATCH v13 06/11] soc: mediatek: Add subsys clock control for bus protection

[Enric Balletbo Serra <eballetbo@gmail.com>]

Hi Weiyi Lu,

Thank you for the patch.

Missatge de Weiyi Lu <weiyi.lu@mediatek.com> del dia dv., 20 de març
2020 a les 8:33:
>
> For the bus protection operations, some subsys clocks need to be enabled
> before releasing the protection, and vise versa.

typo s/vise/vice/

> But those subsys clocks could only be controlled once its corresponding
> power domain is turned on first.
> In this patch, we add the subsys clock control into its relavent steps.

typo s/relavent/relevant/

>
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> ---
>  drivers/soc/mediatek/mtk-scpsys.c | 71 +++++++++++++++++++++++++++++++++++++--
>  1 file changed, 69 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> index a4fb0b23..2a9478f 100644
> --- a/drivers/soc/mediatek/mtk-scpsys.c
> +++ b/drivers/soc/mediatek/mtk-scpsys.c
> @@ -80,6 +80,7 @@
>  #define PWR_STATUS_WB                  BIT(27) /* MT7622 */
>
>  #define MAX_CLKS       3
> +#define MAX_SUBSYS_CLKS 10
>
>  /**
>   * struct scp_domain_data - scp domain data for power on/off flow
> @@ -89,6 +90,8 @@
>   * @sram_pdn_bits: The mask for sram power control bits.
>   * @sram_pdn_ack_bits: The mask for sram power control acked bits.
>   * @basic_clk_name: The basic clocks required by this power domain.
> + * @subsys_clk_prefix: The prefix name of the clocks need to be enabled
> + *                     before releasing bus protection.
>   * @caps: The flag for active wake-up action.
>   * @bp_table: The mask table for multiple step bus protection.
>   */
> @@ -99,6 +102,7 @@ struct scp_domain_data {
>         u32 sram_pdn_bits;
>         u32 sram_pdn_ack_bits;
>         const char *basic_clk_name[MAX_CLKS];
> +       const char *subsys_clk_prefix;
>         u8 caps;
>         struct bus_prot bp_table[MAX_STEPS];
>  };
> @@ -109,6 +113,7 @@ struct scp_domain {
>         struct generic_pm_domain genpd;
>         struct scp *scp;
>         struct clk *clk[MAX_CLKS];
> +       struct clk *subsys_clk[MAX_SUBSYS_CLKS];
>         const struct scp_domain_data *data;
>         struct regulator *supply;
>  };
> @@ -384,16 +389,22 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
>         val |= PWR_RST_B_BIT;
>         writel(val, ctl_addr);
>
> -       ret = scpsys_sram_enable(scpd, ctl_addr);
> +       ret = scpsys_clk_enable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
>         if (ret < 0)
>                 goto err_pwr_ack;
>
> +       ret = scpsys_sram_enable(scpd, ctl_addr);
> +       if (ret < 0)
> +               goto err_sram;
> +
>         ret = scpsys_bus_protect_disable(scpd);
>         if (ret < 0)
> -               goto err_pwr_ack;
> +               goto err_sram;
>
>         return 0;
>
> +err_sram:
> +       scpsys_clk_disable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
>  err_pwr_ack:
>         scpsys_clk_disable(scpd->clk, MAX_CLKS);
>  err_clk:
> @@ -420,6 +431,8 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
>         if (ret < 0)
>                 goto out;
>
> +       scpsys_clk_disable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
> +
>         /* subsys power off */
>         val = readl(ctl_addr);
>         val |= PWR_ISO_BIT;
> @@ -457,6 +470,48 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
>         return ret;
>  }
>
> +static int init_subsys_clks(struct platform_device *pdev,
> +               const char *prefix, struct clk **clk)
> +{
> +       struct device_node *node = pdev->dev.of_node;
> +       u32 prefix_len, sub_clk_cnt = 0;
> +       struct property *prop;
> +       const char *clk_name;
> +
> +       if (!node) {

Is this possible? I suspect you can remove this check.

> +               dev_err(&pdev->dev, "Cannot find scpsys node: %ld\n",
> +                       PTR_ERR(node));
> +               return PTR_ERR(node);
> +       }
> +
> +       prefix_len = strlen(prefix);
> +
> +       of_property_for_each_string(node, "clock-names", prop, clk_name) {
> +               if (!strncmp(clk_name, prefix, prefix_len) &&
> +                               (clk_name[prefix_len] == '-')) {
> +                       if (sub_clk_cnt >= MAX_SUBSYS_CLKS) {
> +                               dev_err(&pdev->dev,
> +                                       "subsys clk out of range %d\n",
> +                                       sub_clk_cnt);
> +                               return -EINVAL;
> +                       }
> +
> +                       clk[sub_clk_cnt] = devm_clk_get(&pdev->dev,
> +                                               clk_name);
> +
> +                       if (IS_ERR(clk[sub_clk_cnt])) {
> +                               dev_err(&pdev->dev,
> +                                       "Subsys clk get fail %ld\n",
> +                                       PTR_ERR(clk[sub_clk_cnt]));

This dev_err is redundant, devm_clk_get already prints it if the clock
is not found.

> +                               return PTR_ERR(clk[sub_clk_cnt]);
> +                       }
> +                       sub_clk_cnt++;
> +               }
> +       }
> +
> +       return sub_clk_cnt;
> +}
> +
>  static int init_basic_clks(struct platform_device *pdev, struct clk **clk,
>                         const char * const *name)
>  {
> @@ -559,6 +614,18 @@ static struct scp *init_scp(struct platform_device *pdev,
>                 if (ret)
>                         return ERR_PTR(ret);
>
> +               if (data->subsys_clk_prefix) {
> +                       ret = init_subsys_clks(pdev,
> +                                       data->subsys_clk_prefix,
> +                                       scpd->subsys_clk);
> +                       if (ret < 0) {
> +                               dev_err(&pdev->dev,
> +                                       "%s: subsys clk unavailable\n",
> +                                       data->name);

And this print is also redundant.


> +                               return ERR_PTR(ret);
> +                       }
> +               }
> +
>                 genpd->name = data->name;
>                 genpd->power_off = scpsys_power_off;
>                 genpd->power_on = scpsys_power_on;
> --
> 1.8.1.1.dirty
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek