From: Bruno Thomsen <bruno.thomsen@gmail.com>
To: Hugo Villeneuve <hugo@hugovil.com>
Cc: a.zummo@towertech.it, alexandre.belloni@bootlin.com,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
linux-rtc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Hugo Villeneuve <hvilleneuve@dimonoff.com>
Subject: Re: [PATCH v3 02/14] rtc: pcf2127: adapt for time/date registers at any offset
Date: Mon, 19 Dec 2022 10:34:08 +0100 [thread overview]
Message-ID: <CAH+2xPAMiQYsAcCDx5Cy3Wo6eVSEJh7ijnZywxD8uHYWP4beFQ@mail.gmail.com> (raw)
In-Reply-To: <20221215150214.1109074-3-hugo@hugovil.com>
Den tor. 15. dec. 2022 kl. 16.20 skrev Hugo Villeneuve <hugo@hugovil.com>:
>
> From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
>
> This will simplify the implementation of new variants into this driver.
>
> Some variants (PCF2131) have a 100th seconds register. This register is
> currently not supported in this driver.
>
> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> ---
> drivers/rtc/rtc-pcf2127.c | 68 ++++++++++++++++++++++-----------------
> 1 file changed, 39 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
> index b9a5d47a439f..fb0caacaabee 100644
> --- a/drivers/rtc/rtc-pcf2127.c
> +++ b/drivers/rtc/rtc-pcf2127.c
> @@ -44,14 +44,17 @@
> #define PCF2127_BIT_CTRL3_BF BIT(3)
> #define PCF2127_BIT_CTRL3_BTSE BIT(4)
> /* Time and date registers */
> -#define PCF2127_REG_SC 0x03
> +#define PCF2127_REG_TIME_DATE_BASE 0x03
> +/* Time and date registers offsets (starting from base register) */
> +#define PCF2127_OFFSET_TD_SC 0
> +#define PCF2127_OFFSET_TD_MN 1
> +#define PCF2127_OFFSET_TD_HR 2
> +#define PCF2127_OFFSET_TD_DM 3
> +#define PCF2127_OFFSET_TD_DW 4
> +#define PCF2127_OFFSET_TD_MO 5
> +#define PCF2127_OFFSET_TD_YR 6
> +/* Time and date registers bits */
> #define PCF2127_BIT_SC_OSF BIT(7)
> -#define PCF2127_REG_MN 0x04
> -#define PCF2127_REG_HR 0x05
> -#define PCF2127_REG_DM 0x06
> -#define PCF2127_REG_DW 0x07
> -#define PCF2127_REG_MO 0x08
> -#define PCF2127_REG_YR 0x09
> /* Alarm registers */
> #define PCF2127_REG_ALARM_SC 0x0A
> #define PCF2127_REG_ALARM_MN 0x0B
> @@ -106,6 +109,7 @@ struct pcf21xx_config {
> int max_register;
> unsigned int has_nvmem:1;
> unsigned int has_bit_wd_ctl_cd0:1;
> + u8 regs_td_base; /* Time/data base registers. */
There is only one base register, so no need to add s.
I think td is an odd short, so maybe u8 reg_time_base.
/Bruno
> };
>
> struct pcf2127 {
> @@ -125,27 +129,31 @@ struct pcf2127 {
> static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
> {
> struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
> - unsigned char buf[10];
> + unsigned char buf[7];
> + unsigned int ctrl3;
> int ret;
>
> /*
> * Avoid reading CTRL2 register as it causes WD_VAL register
> * value to reset to 0 which means watchdog is stopped.
> */
> - ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL3,
> - (buf + PCF2127_REG_CTRL3),
> - ARRAY_SIZE(buf) - PCF2127_REG_CTRL3);
> - if (ret) {
> - dev_err(dev, "%s: read error\n", __func__);
> + ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL3, &ctrl3);
> + if (ret)
> return ret;
> - }
>
> - if (buf[PCF2127_REG_CTRL3] & PCF2127_BIT_CTRL3_BLF)
> + if (ctrl3 & PCF2127_BIT_CTRL3_BLF)
> dev_info(dev,
> "low voltage detected, check/replace RTC battery.\n");
>
> + ret = regmap_bulk_read(pcf2127->regmap, pcf2127->cfg->regs_td_base,
> + buf, sizeof(buf));
> + if (ret) {
> + dev_err(dev, "%s: read error\n", __func__);
> + return ret;
> + }
> +
> /* Clock integrity is not guaranteed when OSF flag is set. */
> - if (buf[PCF2127_REG_SC] & PCF2127_BIT_SC_OSF) {
> + if (buf[PCF2127_OFFSET_TD_SC] & PCF2127_BIT_SC_OSF) {
> /*
> * no need clear the flag here,
> * it will be cleared once the new date is saved
> @@ -158,18 +166,18 @@ static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
> dev_dbg(dev,
> "%s: raw data is cr3=%02x, sec=%02x, min=%02x, hr=%02x, "
> "mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
> - __func__, buf[PCF2127_REG_CTRL3], buf[PCF2127_REG_SC],
> - buf[PCF2127_REG_MN], buf[PCF2127_REG_HR],
> - buf[PCF2127_REG_DM], buf[PCF2127_REG_DW],
> - buf[PCF2127_REG_MO], buf[PCF2127_REG_YR]);
> -
> - tm->tm_sec = bcd2bin(buf[PCF2127_REG_SC] & 0x7F);
> - tm->tm_min = bcd2bin(buf[PCF2127_REG_MN] & 0x7F);
> - tm->tm_hour = bcd2bin(buf[PCF2127_REG_HR] & 0x3F); /* rtc hr 0-23 */
> - tm->tm_mday = bcd2bin(buf[PCF2127_REG_DM] & 0x3F);
> - tm->tm_wday = buf[PCF2127_REG_DW] & 0x07;
> - tm->tm_mon = bcd2bin(buf[PCF2127_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
> - tm->tm_year = bcd2bin(buf[PCF2127_REG_YR]);
> + __func__, ctrl3, buf[PCF2127_OFFSET_TD_SC],
> + buf[PCF2127_OFFSET_TD_MN], buf[PCF2127_OFFSET_TD_HR],
> + buf[PCF2127_OFFSET_TD_DM], buf[PCF2127_OFFSET_TD_DW],
> + buf[PCF2127_OFFSET_TD_MO], buf[PCF2127_OFFSET_TD_YR]);
> +
> + tm->tm_sec = bcd2bin(buf[PCF2127_OFFSET_TD_SC] & 0x7F);
> + tm->tm_min = bcd2bin(buf[PCF2127_OFFSET_TD_MN] & 0x7F);
> + tm->tm_hour = bcd2bin(buf[PCF2127_OFFSET_TD_HR] & 0x3F); /* rtc hr 0-23 */
> + tm->tm_mday = bcd2bin(buf[PCF2127_OFFSET_TD_DM] & 0x3F);
> + tm->tm_wday = buf[PCF2127_OFFSET_TD_DW] & 0x07;
> + tm->tm_mon = bcd2bin(buf[PCF2127_OFFSET_TD_MO] & 0x1F) - 1; /* rtc mn 1-12 */
> + tm->tm_year = bcd2bin(buf[PCF2127_OFFSET_TD_YR]);
> tm->tm_year += 100;
>
> dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
> @@ -207,7 +215,7 @@ static int pcf2127_rtc_set_time(struct device *dev, struct rtc_time *tm)
> buf[i++] = bin2bcd(tm->tm_year - 100);
>
> /* write register's data */
> - err = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_SC, buf, i);
> + err = regmap_bulk_write(pcf2127->regmap, pcf2127->cfg->regs_td_base, buf, i);
> if (err) {
> dev_err(dev,
> "%s: err=%d", __func__, err);
> @@ -650,11 +658,13 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
> .max_register = 0x1d,
> .has_nvmem = 1,
> .has_bit_wd_ctl_cd0 = 1,
> + .regs_td_base = PCF2127_REG_TIME_DATE_BASE,
> },
> [PCF2129] = {
> .max_register = 0x19,
> .has_nvmem = 0,
> .has_bit_wd_ctl_cd0 = 0,
> + .regs_td_base = PCF2127_REG_TIME_DATE_BASE,
> },
> };
>
> --
> 2.30.2
>
next prev parent reply other threads:[~2022-12-19 9:34 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-15 15:02 [PATCH v3 00/14] rtc: pcf2127: add PCF2131 driver Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 01/14] rtc: pcf2127: add variant-specific configuration structure Hugo Villeneuve
2022-12-19 9:05 ` Bruno Thomsen
2022-12-19 15:15 ` Hugo Villeneuve
2022-12-19 17:17 ` Bruno Thomsen
2022-12-19 18:30 ` Hugo Villeneuve
2023-01-07 16:52 ` Bruno Thomsen
2022-12-15 15:02 ` [PATCH v3 02/14] rtc: pcf2127: adapt for time/date registers at any offset Hugo Villeneuve
2022-12-19 9:34 ` Bruno Thomsen [this message]
2022-12-19 16:27 ` Hugo Villeneuve
2023-01-07 16:49 ` Bruno Thomsen
2023-01-20 18:47 ` Alexandre Belloni
2023-01-23 15:54 ` Hugo Villeneuve
2023-06-21 18:18 ` Alexandre Belloni
2022-12-15 15:02 ` [PATCH v3 03/14] rtc: pcf2127: adapt for alarm " Hugo Villeneuve
2023-01-07 16:57 ` Bruno Thomsen
2023-01-20 17:10 ` Alexandre Belloni
2023-01-23 16:02 ` Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 04/14] rtc: pcf2127: adapt for WD " Hugo Villeneuve
2023-01-07 16:59 ` Bruno Thomsen
2022-12-15 15:02 ` [PATCH v3 05/14] rtc: pcf2127: adapt for CLKOUT register " Hugo Villeneuve
2023-01-07 17:01 ` Bruno Thomsen
2022-12-15 15:02 ` [PATCH v3 06/14] rtc: pcf2127: add support for multiple TS functions Hugo Villeneuve
2023-01-07 17:58 ` Bruno Thomsen
2023-01-23 20:41 ` Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 07/14] rtc: pcf2127: add support for PCF2131 RTC Hugo Villeneuve
2023-01-07 18:15 ` Bruno Thomsen
2023-01-23 19:06 ` Hugo Villeneuve
2023-01-20 18:57 ` Alexandre Belloni
2023-01-23 17:27 ` Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 08/14] rtc: pcf2127: add support for PCF2131 interrupts on output INT_A Hugo Villeneuve
2023-01-07 18:17 ` Bruno Thomsen
2023-01-20 16:56 ` Alexandre Belloni
2023-01-23 20:52 ` Hugo Villeneuve
2023-05-11 17:19 ` Hugo Villeneuve
2023-06-21 19:24 ` Alexandre Belloni
2023-06-21 19:26 ` Alexandre Belloni
2023-06-22 14:21 ` Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 09/14] rtc: pcf2127: set PWRMNG value for PCF2131 Hugo Villeneuve
2023-01-07 18:36 ` Bruno Thomsen
2023-01-20 16:39 ` Alexandre Belloni
2023-01-23 22:07 ` Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 10/14] rtc: pcf2127: read and validate PCF2131 device signature Hugo Villeneuve
2023-01-20 17:01 ` Alexandre Belloni
2023-01-23 17:31 ` Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 11/14] rtc: pcf2127: adapt time/date registers write sequence for PCF2131 Hugo Villeneuve
2023-01-07 18:44 ` Bruno Thomsen
2023-01-23 20:55 ` Hugo Villeneuve
2023-01-20 17:09 ` Alexandre Belloni
2023-01-23 21:57 ` Hugo Villeneuve
2023-06-21 19:36 ` Alexandre Belloni
2022-12-15 15:02 ` [PATCH v3 12/14] rtc: pcf2127: support generic watchdog timing configuration Hugo Villeneuve
2023-01-18 13:23 ` Philipp Rosenberger
2023-01-19 17:48 ` Hugo Villeneuve
2023-01-20 8:06 ` Philipp Rosenberger
2023-01-20 14:44 ` Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 13/14] rtc: pcf2127: add flag for watchdog register value read support Hugo Villeneuve
2023-01-07 18:47 ` Bruno Thomsen
2022-12-15 15:02 ` [PATCH v3 14/14] dt-bindings: rtc: pcf2127: add PCF2131 Hugo Villeneuve
2022-12-16 13:24 ` Krzysztof Kozlowski
2022-12-19 9:14 ` Bruno Thomsen
2022-12-19 16:25 ` Hugo Villeneuve
2022-12-19 17:18 ` Bruno Thomsen
2022-12-19 18:31 ` Hugo Villeneuve
2023-01-20 19:05 ` [PATCH v3 00/14] rtc: pcf2127: add PCF2131 driver Alexandre Belloni
2023-01-23 15:51 ` Hugo Villeneuve
2023-06-21 14:14 ` Hugo Villeneuve
2023-06-21 16:59 ` Hugo Villeneuve
2023-06-21 18:14 ` Alexandre Belloni
2023-06-21 18:28 ` Hugo Villeneuve
2023-07-05 13:40 ` Hugo Villeneuve
2023-07-07 14:16 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAH+2xPAMiQYsAcCDx5Cy3Wo6eVSEJh7ijnZywxD8uHYWP4beFQ@mail.gmail.com \
--to=bruno.thomsen@gmail.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=hugo@hugovil.com \
--cc=hvilleneuve@dimonoff.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).