Re: [PATCH v2] mmc: dw_mmc: Add data CRC error injection

[Ulf Hansson <ulf.hansson@linaro.org>]

On Thu, 1 Jul 2021 at 10:05, Vincent Whitchurch
<vincent.whitchurch@axis.com> wrote:
>
> This driver has had problems when handling data errors.  Add fault
> injection support so that the abort handling can be easily triggered and
> regression-tested.  A hrtimer is used to indicate a data CRC error at
> various points during the data transfer.
>
> Note that for the recent problem with hangs in the case of some data CRC
> errors, a udelay(10) inserted at the start of send_stop_abort() greatly
> helped in triggering the error, but I've not included this as part of
> the fault injection support since it seemed too specific.
>
> Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>

Applied for next, thanks!

Kind regards
Uffe


> ---
>
> Notes:
>     v2: Add missing includes.
>
>  drivers/mmc/host/dw_mmc.c | 73 +++++++++++++++++++++++++++++++++++++++
>  drivers/mmc/host/dw_mmc.h |  7 ++++
>  2 files changed, 80 insertions(+)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index d333130d1531..dbbb94e6ff4b 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -17,9 +17,11 @@
>  #include <linux/interrupt.h>
>  #include <linux/iopoll.h>
>  #include <linux/ioport.h>
> +#include <linux/ktime.h>
>  #include <linux/module.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/prandom.h>
>  #include <linux/seq_file.h>
>  #include <linux/slab.h>
>  #include <linux/stat.h>
> @@ -181,6 +183,9 @@ static void dw_mci_init_debugfs(struct dw_mci_slot *slot)
>                            &host->pending_events);
>         debugfs_create_xul("completed_events", S_IRUSR, root,
>                            &host->completed_events);
> +#ifdef CONFIG_FAULT_INJECTION
> +       fault_create_debugfs_attr("fail_data_crc", root, &host->fail_data_crc);
> +#endif
>  }
>  #endif /* defined(CONFIG_DEBUG_FS) */
>
> @@ -1788,6 +1793,68 @@ static const struct mmc_host_ops dw_mci_ops = {
>         .prepare_hs400_tuning   = dw_mci_prepare_hs400_tuning,
>  };
>
> +#ifdef CONFIG_FAULT_INJECTION
> +static enum hrtimer_restart dw_mci_fault_timer(struct hrtimer *t)
> +{
> +       struct dw_mci *host = container_of(t, struct dw_mci, fault_timer);
> +       unsigned long flags;
> +
> +       spin_lock_irqsave(&host->irq_lock, flags);
> +
> +       if (!host->data_status)
> +               host->data_status = SDMMC_INT_DCRC;
> +       set_bit(EVENT_DATA_ERROR, &host->pending_events);
> +       tasklet_schedule(&host->tasklet);
> +
> +       spin_unlock_irqrestore(&host->irq_lock, flags);
> +
> +       return HRTIMER_NORESTART;
> +}
> +
> +static void dw_mci_start_fault_timer(struct dw_mci *host)
> +{
> +       struct mmc_data *data = host->data;
> +
> +       if (!data || data->blocks <= 1)
> +               return;
> +
> +       if (!should_fail(&host->fail_data_crc, 1))
> +               return;
> +
> +       /*
> +        * Try to inject the error at random points during the data transfer.
> +        */
> +       hrtimer_start(&host->fault_timer,
> +                     ms_to_ktime(prandom_u32() % 25),
> +                     HRTIMER_MODE_REL);
> +}
> +
> +static void dw_mci_stop_fault_timer(struct dw_mci *host)
> +{
> +       hrtimer_cancel(&host->fault_timer);
> +}
> +
> +static void dw_mci_init_fault(struct dw_mci *host)
> +{
> +       host->fail_data_crc = (struct fault_attr) FAULT_ATTR_INITIALIZER;
> +
> +       hrtimer_init(&host->fault_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
> +       host->fault_timer.function = dw_mci_fault_timer;
> +}
> +#else
> +static void dw_mci_init_fault(struct dw_mci *host)
> +{
> +}
> +
> +static void dw_mci_start_fault_timer(struct dw_mci *host)
> +{
> +}
> +
> +static void dw_mci_stop_fault_timer(struct dw_mci *host)
> +{
> +}
> +#endif
> +
>  static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq)
>         __releases(&host->lock)
>         __acquires(&host->lock)
> @@ -2102,6 +2169,7 @@ static void dw_mci_tasklet_func(struct tasklet_struct *t)
>                                 break;
>                         }
>
> +                       dw_mci_stop_fault_timer(host);
>                         host->data = NULL;
>                         set_bit(EVENT_DATA_COMPLETE, &host->completed_events);
>                         err = dw_mci_data_complete(host, data);
> @@ -2151,6 +2219,7 @@ static void dw_mci_tasklet_func(struct tasklet_struct *t)
>                         if (mrq->cmd->error && mrq->data)
>                                 dw_mci_reset(host);
>
> +                       dw_mci_stop_fault_timer(host);
>                         host->cmd = NULL;
>                         host->data = NULL;
>
> @@ -2600,6 +2669,8 @@ static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status)
>
>         set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
>         tasklet_schedule(&host->tasklet);
> +
> +       dw_mci_start_fault_timer(host);
>  }
>
>  static void dw_mci_handle_cd(struct dw_mci *host)
> @@ -3223,6 +3294,8 @@ int dw_mci_probe(struct dw_mci *host)
>         spin_lock_init(&host->irq_lock);
>         INIT_LIST_HEAD(&host->queue);
>
> +       dw_mci_init_fault(host);
> +
>         /*
>          * Get the host data width - this assumes that HCON has been set with
>          * the correct values.
> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
> index da5923a92e60..ce05d81477d9 100644
> --- a/drivers/mmc/host/dw_mmc.h
> +++ b/drivers/mmc/host/dw_mmc.h
> @@ -14,6 +14,8 @@
>  #include <linux/mmc/core.h>
>  #include <linux/dmaengine.h>
>  #include <linux/reset.h>
> +#include <linux/fault-inject.h>
> +#include <linux/hrtimer.h>
>  #include <linux/interrupt.h>
>
>  enum dw_mci_state {
> @@ -230,6 +232,11 @@ struct dw_mci {
>         struct timer_list       cmd11_timer;
>         struct timer_list       cto_timer;
>         struct timer_list       dto_timer;
> +
> +#ifdef CONFIG_FAULT_INJECTION
> +       struct fault_attr       fail_data_crc;
> +       struct hrtimer          fault_timer;
> +#endif
>  };
>
>  /* DMA ops for Internal/External DMAC interface */
> --
> 2.28.0
>