From: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
To: Sebastian Reichel <sebastian.reichel@collabora.com>,
Support Opensource <Support.Opensource@diasemi.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>
Cc: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"kernel@collabora.com" <kernel@collabora.com>
Subject: RE: [PATCHv4] ASoC: da7213: add default clock handling
Date: Fri, 3 Jul 2020 09:44:17 +0000 [thread overview]
Message-ID: <DB6PR1001MB10965E5BDA9B3EF570B607A4806A0@DB6PR1001MB1096.EURPRD10.PROD.OUTLOOK.COM> (raw)
In-Reply-To: <20200626164623.87894-1-sebastian.reichel@collabora.com>
On 26 June 2020 17:46, Sebastian Reichel wrote:
> This adds default clock/PLL configuration to the driver
> for usage with generic drivers like simple-card for usage
> with a fixed rate clock.
>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Looks good. Thanks for the work here.
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
> ---
> Changes since PATCHv3:
> * rebase to v5.8-rc1
> * add SRM support for usage in slave mode with simple-card.
> I only tested with master mode, though.
> ---
> sound/soc/codecs/da7213.c | 83
> ++++++++++++++++++++++++++++++++++++---
> sound/soc/codecs/da7213.h | 2 +
> 2 files changed, 80 insertions(+), 5 deletions(-)
>
> diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c
> index 3e6ad996741b..1a4fece20bcd 100644
> --- a/sound/soc/codecs/da7213.c
> +++ b/sound/soc/codecs/da7213.c
> @@ -1156,6 +1156,7 @@ static int da7213_hw_params(struct
> snd_pcm_substream *substream,
> struct snd_soc_dai *dai)
> {
> struct snd_soc_component *component = dai->component;
> + struct da7213_priv *da7213 =
> snd_soc_component_get_drvdata(component);
> u8 dai_ctrl = 0;
> u8 fs;
>
> @@ -1181,33 +1182,43 @@ static int da7213_hw_params(struct
> snd_pcm_substream *substream,
> switch (params_rate(params)) {
> case 8000:
> fs = DA7213_SR_8000;
> + da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
> break;
> case 11025:
> fs = DA7213_SR_11025;
> + da7213->out_rate = DA7213_PLL_FREQ_OUT_90316800;
> break;
> case 12000:
> fs = DA7213_SR_12000;
> + da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
> break;
> case 16000:
> fs = DA7213_SR_16000;
> + da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
> break;
> case 22050:
> fs = DA7213_SR_22050;
> + da7213->out_rate = DA7213_PLL_FREQ_OUT_90316800;
> break;
> case 32000:
> fs = DA7213_SR_32000;
> + da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
> break;
> case 44100:
> fs = DA7213_SR_44100;
> + da7213->out_rate = DA7213_PLL_FREQ_OUT_90316800;
> break;
> case 48000:
> fs = DA7213_SR_48000;
> + da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
> break;
> case 88200:
> fs = DA7213_SR_88200;
> + da7213->out_rate = DA7213_PLL_FREQ_OUT_90316800;
> break;
> case 96000:
> fs = DA7213_SR_96000;
> + da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
> break;
> default:
> return -EINVAL;
> @@ -1392,9 +1403,9 @@ static int da7213_set_component_sysclk(struct
> snd_soc_component *component,
> }
>
> /* Supported PLL input frequencies are 32KHz, 5MHz - 54MHz. */
> -static int da7213_set_component_pll(struct snd_soc_component *component,
> - int pll_id, int source,
> - unsigned int fref, unsigned int fout)
> +static int _da7213_set_component_pll(struct snd_soc_component
> *component,
> + int pll_id, int source,
> + unsigned int fref, unsigned int fout)
> {
> struct da7213_priv *da7213 =
> snd_soc_component_get_drvdata(component);
>
> @@ -1503,6 +1514,16 @@ static int da7213_set_component_pll(struct
> snd_soc_component *component,
> return 0;
> }
>
> +static int da7213_set_component_pll(struct snd_soc_component *component,
> + int pll_id, int source,
> + unsigned int fref, unsigned int fout)
> +{
> + struct da7213_priv *da7213 =
> snd_soc_component_get_drvdata(component);
> + da7213->fixed_clk_auto_pll = false;
> +
> + return _da7213_set_component_pll(component, pll_id, source, fref,
> fout);
> +}
> +
> /* DAI operations */
> static const struct snd_soc_dai_ops da7213_dai_ops = {
> .hw_params = da7213_hw_params,
> @@ -1532,6 +1553,50 @@ static struct snd_soc_dai_driver da7213_dai = {
> .symmetric_rates = 1,
> };
>
> +static int da7213_set_auto_pll(struct snd_soc_component *component, bool
> enable)
> +{
> + struct da7213_priv *da7213 =
> snd_soc_component_get_drvdata(component);
> + int mode;
> +
> + if (!da7213->fixed_clk_auto_pll)
> + return 0;
> +
> + da7213->mclk_rate = clk_get_rate(da7213->mclk);
> +
> + if (enable) {
> + /* Slave mode needs SRM for non-harmonic frequencies */
> + if (da7213->master)
> + mode = DA7213_SYSCLK_PLL;
> + else
> + mode = DA7213_SYSCLK_PLL_SRM;
> +
> + /* PLL is not required for harmonic frequencies */
> + switch (da7213->out_rate) {
> + case DA7213_PLL_FREQ_OUT_90316800:
> + if (da7213->mclk_rate == 11289600 ||
> + da7213->mclk_rate == 22579200 ||
> + da7213->mclk_rate == 45158400)
> + mode = DA7213_SYSCLK_MCLK;
> + break;
> + case DA7213_PLL_FREQ_OUT_98304000:
> + if (da7213->mclk_rate == 12288000 ||
> + da7213->mclk_rate == 24576000 ||
> + da7213->mclk_rate == 49152000)
> + mode = DA7213_SYSCLK_MCLK;
> +
> + break;
> + default:
> + return -1;
> + }
> + } else {
> + /* Disable PLL in standby */
> + mode = DA7213_SYSCLK_MCLK;
> + }
> +
> + return _da7213_set_component_pll(component, 0, mode,
> + da7213->mclk_rate, da7213->out_rate);
> +}
> +
> static int da7213_set_bias_level(struct snd_soc_component *component,
> enum snd_soc_bias_level level)
> {
> @@ -1551,6 +1616,8 @@ static int da7213_set_bias_level(struct
> snd_soc_component *component,
> "Failed to enable mclk\n");
> return ret;
> }
> +
> + da7213_set_auto_pll(component, true);
> }
> }
> break;
> @@ -1562,8 +1629,10 @@ static int da7213_set_bias_level(struct
> snd_soc_component *component,
> DA7213_VMID_EN | DA7213_BIAS_EN);
> } else {
> /* Remove MCLK */
> - if (da7213->mclk)
> + if (da7213->mclk) {
> + da7213_set_auto_pll(component, false);
> clk_disable_unprepare(da7213->mclk);
> + }
> }
> break;
> case SND_SOC_BIAS_OFF:
> @@ -1693,7 +1762,6 @@ static struct da7213_platform_data
> return pdata;
> }
>
> -
> static int da7213_probe(struct snd_soc_component *component)
> {
> struct da7213_priv *da7213 =
> snd_soc_component_get_drvdata(component);
> @@ -1829,6 +1897,11 @@ static int da7213_probe(struct snd_soc_component
> *component)
> return PTR_ERR(da7213->mclk);
> else
> da7213->mclk = NULL;
> + } else {
> + /* Do automatic PLL handling assuming fixed clock until
> + * set_pll() has been called. This makes the codec usable
> + * with the simple-audio-card driver. */
> + da7213->fixed_clk_auto_pll = true;
> }
>
> return 0;
> diff --git a/sound/soc/codecs/da7213.h b/sound/soc/codecs/da7213.h
> index 3890829dfb6e..97ccf0ddd2be 100644
> --- a/sound/soc/codecs/da7213.h
> +++ b/sound/soc/codecs/da7213.h
> @@ -535,10 +535,12 @@ struct da7213_priv {
> struct regulator_bulk_data supplies[DA7213_NUM_SUPPLIES];
> struct clk *mclk;
> unsigned int mclk_rate;
> + unsigned int out_rate;
> int clk_src;
> bool master;
> bool alc_calib_auto;
> bool alc_en;
> + bool fixed_clk_auto_pll;
> struct da7213_platform_data *pdata;
> };
>
> --
> 2.27.0
next prev parent reply other threads:[~2020-07-03 9:44 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-11 13:25 [PATCHv3 0/5] ASoC: da7213: support for usage with simple-card Sebastian Reichel
2020-05-11 13:25 ` [PATCHv3 1/5] ASoC: da7213: Add da7212 DT compatible Sebastian Reichel
2020-05-11 13:25 ` [PATCHv3 2/5] ASoC: da7213: Add regulator support Sebastian Reichel
2020-05-11 13:25 ` [PATCHv3 3/5] ASoC: da7213: move set_sysclk to codec level Sebastian Reichel
2020-05-11 13:25 ` [PATCHv3 4/5] ASoC: da7213: move set_pll " Sebastian Reichel
2020-05-11 13:25 ` [PATCHv3 5/5] ASoC: da7213: add default clock handling Sebastian Reichel
2020-05-18 11:20 ` Adam Thomson
2020-06-26 16:46 ` [PATCHv4] " Sebastian Reichel
2020-07-03 9:44 ` Adam Thomson [this message]
2020-07-07 14:17 ` Mark Brown
2020-05-18 16:41 ` [PATCHv3 0/5] ASoC: da7213: support for usage with simple-card Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DB6PR1001MB10965E5BDA9B3EF570B607A4806A0@DB6PR1001MB1096.EURPRD10.PROD.OUTLOOK.COM \
--to=adam.thomson.opensource@diasemi.com \
--cc=Support.Opensource@diasemi.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=kernel@collabora.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=sebastian.reichel@collabora.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).