linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Manish Narani <MNARANI@xilinx.com>
To: Manish Narani <MNARANI@xilinx.com>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	"catalin.marinas@arm.com" <catalin.marinas@arm.com>,
	"will.deacon@arm.com" <will.deacon@arm.com>,
	Michal Simek <michals@xilinx.com>, "bp@alien8.de" <bp@alien8.de>,
	"mchehab@kernel.org" <mchehab@kernel.org>,
	"mdf@kernel.org" <mdf@kernel.org>,
	Edgar Iglesias <edgari@xilinx.com>,
	Shubhrajyoti Datta <shubhraj@xilinx.com>,
	Naga Sureshkumar Relli <nagasure@xilinx.com>,
	Bharat Kumar Gogada <bharatku@xilinx.com>,
	"stefan.krsmanovic@aggios.com" <stefan.krsmanovic@aggios.com>
Cc: Srinivas Goud <sgoud@xilinx.com>,
	Anirudha Sarangi <anirudh@xilinx.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Subject: RE: [PATCH v4 1/4] edac: synps: Add platform specific structures for ddrc controller
Date: Sat, 18 Aug 2018 10:11:54 +0000	[thread overview]
Message-ID: <DM6PR02MB5227CBDE0742DB55F26F014CC13C0@DM6PR02MB5227.namprd02.prod.outlook.com> (raw)
In-Reply-To: <1533374735-16662-2-git-send-email-manish.narani@xilinx.com>

Ping.
 
> -----Original Message-----
> From: Manish Narani [mailto:manish.narani@xilinx.com]
> Sent: Saturday, August 4, 2018 2:56 PM
> To: robh+dt@kernel.org; mark.rutland@arm.com; catalin.marinas@arm.com;
> will.deacon@arm.com; Michal Simek <michals@xilinx.com>; bp@alien8.de;
> mchehab@kernel.org; mdf@kernel.org; Edgar Iglesias <edgari@xilinx.com>;
> Shubhrajyoti Datta <shubhraj@xilinx.com>; Naga Sureshkumar Relli
> <nagasure@xilinx.com>; Bharat Kumar Gogada <bharatku@xilinx.com>;
> stefan.krsmanovic@aggios.com
> Cc: Srinivas Goud <sgoud@xilinx.com>; Anirudha Sarangi
> <anirudh@xilinx.com>; linux-kernel@vger.kernel.org;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> edac@vger.kernel.org; Manish Narani <MNARANI@xilinx.com>
> Subject: [PATCH v4 1/4] edac: synps: Add platform specific structures for ddrc
> controller
> 
> Add platform specific structures, so that we can add different IP support later
> using quirks.
> 
> Signed-off-by: Manish Narani <manish.narani@xilinx.com>
> ---
>  drivers/edac/synopsys_edac.c | 83 ++++++++++++++++++++++++++++++++++--
> --------
>  1 file changed, 65 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c index
> 0c9c59e..b3c54e7 100644
> --- a/drivers/edac/synopsys_edac.c
> +++ b/drivers/edac/synopsys_edac.c
> @@ -22,6 +22,7 @@
>  #include <linux/edac.h>
>  #include <linux/module.h>
>  #include <linux/platform_device.h>
> +#include <linux/of.h>
> 
>  #include "edac_module.h"
> 
> @@ -130,6 +131,7 @@ struct synps_ecc_status {
>   * @baseaddr:	Base address of the DDR controller
>   * @message:	Buffer for framing the event specific info
>   * @stat:	ECC status information
> + * @p_data:	Pointer to platform data
>   * @ce_cnt:	Correctable Error count
>   * @ue_cnt:	Uncorrectable Error count
>   */
> @@ -137,24 +139,47 @@ struct synps_edac_priv {
>  	void __iomem *baseaddr;
>  	char message[SYNPS_EDAC_MSG_SIZE];
>  	struct synps_ecc_status stat;
> +	const struct synps_platform_data *p_data;
>  	u32 ce_cnt;
>  	u32 ue_cnt;
>  };
> 
>  /**
> + * struct synps_platform_data -  synps platform data structure
> + * @edac_geterror_info:	function pointer to synps edac error info
> + * @edac_get_mtype:	function pointer to synps edac mtype
> + * @edac_get_dtype:	function pointer to synps edac dtype
> + * @edac_get_eccstate:	function pointer to synps edac eccstate
> + * @quirks:		to differentiate IPs
> + */
> +struct synps_platform_data {
> +	int (*edac_geterror_info)(struct synps_edac_priv *priv);
> +	enum mem_type (*edac_get_mtype)(const void __iomem *base);
> +	enum dev_type (*edac_get_dtype)(const void __iomem *base);
> +	bool (*edac_get_eccstate)(void __iomem *base);
> +	int quirks;
> +};
> +
> +/**
>   * synps_edac_geterror_info - Get the current ecc error info
> - * @base:	Pointer to the base address of the ddr memory controller
> - * @p:		Pointer to the synopsys ecc status structure
> + * @priv:	Pointer to DDR memory controller private instance data
>   *
>   * Determines there is any ecc error or not
>   *
>   * Return: one if there is no error otherwise returns zero
>   */
> -static int synps_edac_geterror_info(void __iomem *base,
> -				    struct synps_ecc_status *p)
> +static int synps_edac_geterror_info(struct synps_edac_priv *priv)
>  {
> +	void __iomem *base;
> +	struct synps_ecc_status *p;
>  	u32 regval, clearval = 0;
> 
> +	if (!priv)
> +		return 1;
> +
> +	base = priv->baseaddr;
> +	p = &priv->stat;
> +
>  	regval = readl(base + STAT_OFST);
>  	if (!regval)
>  		return 1;
> @@ -240,9 +265,10 @@ static void synps_edac_handle_error(struct
> mem_ctl_info *mci,  static void synps_edac_check(struct mem_ctl_info *mci)  {
>  	struct synps_edac_priv *priv = mci->pvt_info;
> +	const struct synps_platform_data *p_data = priv->p_data;
>  	int status;
> 
> -	status = synps_edac_geterror_info(priv->baseaddr, &priv->stat);
> +	status = p_data->edac_geterror_info(priv);
>  	if (status)
>  		return;
> 
> @@ -362,6 +388,7 @@ static int synps_edac_init_csrows(struct mem_ctl_info
> *mci)
>  	struct csrow_info *csi;
>  	struct dimm_info *dimm;
>  	struct synps_edac_priv *priv = mci->pvt_info;
> +	const struct synps_platform_data *p_data = priv->p_data;
>  	u32 size;
>  	int row, j;
> 
> @@ -370,12 +397,13 @@ static int synps_edac_init_csrows(struct
> mem_ctl_info *mci)
>  		size = synps_edac_get_memsize();
> 
>  		for (j = 0; j < csi->nr_channels; j++) {
> -			dimm            = csi->channels[j]->dimm;
> +			dimm = csi->channels[j]->dimm;
>  			dimm->edac_mode = EDAC_FLAG_SECDED;
> -			dimm->mtype     = synps_edac_get_mtype(priv-
> >baseaddr);
> -			dimm->nr_pages  = (size >> PAGE_SHIFT) / csi-
> >nr_channels;
> -			dimm->grain     = SYNPS_EDAC_ERR_GRAIN;
> -			dimm->dtype     = synps_edac_get_dtype(priv-
> >baseaddr);
> +			dimm->mtype = p_data->edac_get_mtype(priv-
> >baseaddr);
> +			dimm->nr_pages = (size >> PAGE_SHIFT) /
> +						csi->nr_channels;
> +			dimm->grain = SYNPS_EDAC_ERR_GRAIN;
> +			dimm->dtype = p_data->edac_get_dtype(priv-
> >baseaddr);
>  		}
>  	}
> 
> @@ -423,6 +451,21 @@ static int synps_edac_mc_init(struct mem_ctl_info
> *mci,
>  	return status;
>  }
> 
> +static const struct synps_platform_data zynq_edac_def = {
> +	.edac_geterror_info	= synps_edac_geterror_info,
> +	.edac_get_mtype		= synps_edac_get_mtype,
> +	.edac_get_dtype		= synps_edac_get_dtype,
> +	.edac_get_eccstate	= synps_edac_get_eccstate,
> +	.quirks			= 0,
> +};
> +
> +static const struct of_device_id synps_edac_match[] = {
> +	{ .compatible = "xlnx,zynq-ddrc-a05", .data = (void *)&zynq_edac_def },
> +	{ /* end of table */ }
> +};
> +
> +MODULE_DEVICE_TABLE(of, synps_edac_match);
> +
>  /**
>   * synps_edac_mc_probe - Check controller and bind driver
>   * @pdev:	Pointer to the platform_device struct
> @@ -440,13 +483,22 @@ static int synps_edac_mc_probe(struct
> platform_device *pdev)
>  	int rc;
>  	struct resource *res;
>  	void __iomem *baseaddr;
> +	const struct of_device_id *match;
> +	const struct synps_platform_data *p_data;
> 
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	baseaddr = devm_ioremap_resource(&pdev->dev, res);
>  	if (IS_ERR(baseaddr))
>  		return PTR_ERR(baseaddr);
> 
> -	if (!synps_edac_get_eccstate(baseaddr)) {
> +	match = of_match_node(synps_edac_match, pdev->dev.of_node);
> +	if (!match && !match->data) {
> +		dev_err(&pdev->dev, "of_match_node() failed\n");
> +		return -EINVAL;
> +	}
> +
> +	p_data = (struct synps_platform_data *)match->data;
> +	if (!(p_data->edac_get_eccstate(baseaddr))) {
>  		edac_printk(KERN_INFO, EDAC_MC, "ECC not enabled\n");
>  		return -ENXIO;
>  	}
> @@ -468,6 +520,8 @@ static int synps_edac_mc_probe(struct platform_device
> *pdev)
> 
>  	priv = mci->pvt_info;
>  	priv->baseaddr = baseaddr;
> +	priv->p_data = match->data;
> +
>  	rc = synps_edac_mc_init(mci, pdev);
>  	if (rc) {
>  		edac_printk(KERN_ERR, EDAC_MC,
> @@ -511,13 +565,6 @@ static int synps_edac_mc_remove(struct
> platform_device *pdev)
>  	return 0;
>  }
> 
> -static const struct of_device_id synps_edac_match[] = {
> -	{ .compatible = "xlnx,zynq-ddrc-a05", },
> -	{ /* end of table */ }
> -};
> -
> -MODULE_DEVICE_TABLE(of, synps_edac_match);
> -
>  static struct platform_driver synps_edac_mc_driver = {
>  	.driver = {
>  		   .name = "synopsys-edac",
> --
> 2.1.1


  reply	other threads:[~2018-08-18 10:12 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-04  9:25 [PATCH v4 0/4] EDAC: Enhancements to Synopsys EDAC driver Manish Narani
2018-08-04  9:25 ` [PATCH v4 1/4] edac: synps: Add platform specific structures for ddrc controller Manish Narani
2018-08-18 10:11   ` Manish Narani [this message]
2018-08-18 12:45     ` Borislav Petkov
2018-08-21 13:06   ` Borislav Petkov
2018-08-22 12:20     ` Manish Narani
2018-08-04  9:25 ` [PATCH v4 2/4] dt: bindings: Document ZynqMP DDRC in Synopsys documentation Manish Narani
2018-08-07 14:56   ` Rob Herring
2018-08-04  9:25 ` [PATCH v4 3/4] edac: synopsys: Add EDAC ECC support for ZynqMP DDRC Manish Narani
2018-08-21 13:09   ` Borislav Petkov
2018-08-22 13:02     ` Manish Narani
2018-08-22 13:34       ` Borislav Petkov
2018-08-04  9:25 ` [PATCH v4 4/4] arm64: zynqmp: Add DDRC node Manish Narani
2018-08-18 10:12   ` Manish Narani
2018-08-04 16:32 ` [PATCH v4 0/4] EDAC: Enhancements to Synopsys EDAC driver Borislav Petkov
2018-08-06 13:58   ` Manish Narani

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=DM6PR02MB5227CBDE0742DB55F26F014CC13C0@DM6PR02MB5227.namprd02.prod.outlook.com \
    --to=mnarani@xilinx.com \
    --cc=anirudh@xilinx.com \
    --cc=bharatku@xilinx.com \
    --cc=bp@alien8.de \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=edgari@xilinx.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-edac@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mchehab@kernel.org \
    --cc=mdf@kernel.org \
    --cc=michals@xilinx.com \
    --cc=nagasure@xilinx.com \
    --cc=robh+dt@kernel.org \
    --cc=sgoud@xilinx.com \
    --cc=shubhraj@xilinx.com \
    --cc=stefan.krsmanovic@aggios.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).