From: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
To: Carl-Daniel Hailfinger <c-d.hailfinger.kernel.2003@gmx.net>
Cc: "Javi Pardo (DAKOTA)" <dakota@dakotabcn.net>,
Alan Cox <alan@lxorguk.ukuu.org.uk>,
Andre Hedrick <andre@linux-ide.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
<ataraid-list@redhat.com>
Subject: Re: promise NEITHER IDE PORT ENABLED
Date: Tue, 6 May 2003 14:17:29 +0200 (MET DST) [thread overview]
Message-ID: <Pine.SOL.4.30.0305061409260.25918-200000@mion.elka.pw.edu.pl> (raw)
In-Reply-To: <3EB79542.5000903@gmx.net>
[-- Attachment #1: Type: TEXT/PLAIN, Size: 1702 bytes --]
Hi,
It is a config error, CONFIG_PDC202XX_FORCE depends on
CONFIG_BLK_DEV_PDC202XX_NEW. So even if you set it manually
in .config to y, the change won't be propagated.
Here is a quick patch to make force option visible for both old/new pdc.
More elegant solution will be to split force option for old/new pdc
as suggested by #fixme in Config.in.
Patch agaist 2.4.21-rc1, if it works for you please forward to Marcello.
Regards,
--
Bartlomiej
On Tue, 6 May 2003, Carl-Daniel Hailfinger wrote:
> Alan,
>
> could you please elaborate which of the options you meant is missing
> below? Thanks.
>
> Javi Pardo (DAKOTA) wrote:
> > Alan Cox wrote:
> >>Carl-Daniel Hailfinger wrote:
> >>
> >>>could you please take a look at this? I thought the IDE code in
> >>>2.4.21-rc1 is able to force enable the ports of a promise controller.
> >>
> >>It can - if you set the configuration option to do so
> >>
> >
> > i am the problem with the PDC20267 Chipset.
> >
> > i am downloaded the kernel 2.4.20 and 2.4.21-rc1
> > and i am set this options for IDE
> >
> > CONFIG_BLK_DEV_PDC202XX=y
> > # CONFIG_PDC202XX_BURST is not set
> > CONFIG_PDC202XX_FORCE=y <- this options force IDE detections
> > CONFIG_BLK_DEV_VIA82CXXX=y
> > # CONFIG_IDE_CHIPSETS is not set
> > CONFIG_IDEDMA_AUTO=y
> > # CONFIG_IDEDMA_IVB is not set
> > # CONFIG_DMA_NONPCI is not set
> > CONFIG_BLK_DEV_IDE_MODES=y
> > CONFIG_BLK_DEV_ATARAID=y
> > CONFIG_BLK_DEV_ATARAID_PDC=y
> > # CONFIG_BLK_DEV_ATARAID_HPT is not set
> >
> >
> > the kernel 2.4.20 and 2.4.21-rc1 NO detect the ide channels and mi system crashes
> >
> > wath is the problem? i am select all correct options but no work...
>
> Regards,
> Carl-Daniel
[-- Attachment #2: Type: TEXT/PLAIN, Size: 940 bytes --]
--- linux-2.4.21-rc1/drivers/ide/Config.in Sat Apr 26 17:10:47 2003
+++ linux/drivers/ide/Config.in Tue May 6 13:46:15 2003
@@ -66,7 +66,7 @@
dep_bool ' Special UDMA Feature' CONFIG_PDC202XX_BURST $CONFIG_BLK_DEV_PDC202XX_OLD $CONFI_BLK_DEV_IDEDMA_PCI
dep_tristate ' PROMISE PDC202{68|69|70|71|75|76|77} support' CONFIG_BLK_DEV_PDC202XX_NEW $CONFIG_BLK_DEV_IDEDMA_PCI
# FIXME - probably wants to be one for old and for new
- dep_bool ' Special FastTrak Feature' CONFIG_PDC202XX_FORCE $CONFIG_BLK_DEV_PDC202XX_NEW
+ dep_bool ' Special FastTrak Feature' CONFIG_PDC202XX_FORCE
dep_tristate ' RZ1000 chipset bugfix/support' CONFIG_BLK_DEV_RZ1000 $CONFIG_X86
dep_tristate ' SCx200 chipset support' CONFIG_BLK_DEV_SC1200 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_tristate ' ServerWorks OSB4/CSB5/CSB6 chipsets support' CONFIG_BLK_DEV_SVWKS $CONFIG_BLK_DEV_IDEDMA_PCI
prev parent reply other threads:[~2003-05-06 12:05 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <040101c308df$452110f0$3200000a@dakotapiv>
[not found] ` <3EA683A8.8040303@gmx.net>
[not found] ` <036f01c30ff0$d2197fc0$3200000a@dakotapiv>
2003-05-02 21:58 ` promise NEITHER IDE PORT ENABLED Carl-Daniel Hailfinger
2003-05-03 15:03 ` Alan Cox
[not found] ` <008e01c31224$844c2050$3200000a@dakotapiv>
2003-05-06 10:58 ` Carl-Daniel Hailfinger
2003-05-06 12:17 ` Bartlomiej Zolnierkiewicz [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.SOL.4.30.0305061409260.25918-200000@mion.elka.pw.edu.pl \
--to=b.zolnierkiewicz@elka.pw.edu.pl \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=andre@linux-ide.org \
--cc=ataraid-list@redhat.com \
--cc=c-d.hailfinger.kernel.2003@gmx.net \
--cc=dakota@dakotabcn.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).