From: Stephan Gerhold <stephan@gerhold.net>
To: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Cc: linux-kernel@vger.kernel.org,
~postmarketos/upstreaming@lists.sr.ht,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 2/3] arm64: dts: qcom: msm8916: Add blsp_i2c3
Date: Sun, 24 Jan 2021 16:52:40 +0100 [thread overview]
Message-ID: <YA2XyLbrEzN3tvJr@gerhold.net> (raw)
In-Reply-To: <20210124135409.5473-3-jonathan.albrieux@gmail.com>
On Sun, Jan 24, 2021 at 02:54:06PM +0100, Jonathan Albrieux wrote:
> MSM8916 has another I2C QUP controller that can be enabled on
> GPIO 10 and 11.
>
> Add blsp_i2c3 to msm8916.dtsi and disable it by default.
>
> Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
> ---
> arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 16 ++++++++++++++++
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 15 +++++++++++++++
> 2 files changed, 31 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
> index 4dc437f13fa5..7dedb91b9930 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
> @@ -220,6 +220,22 @@
> bias-disable;
> };
>
> + i2c3_default: i2c3-default {
> + pins = "gpio10", "gpio11";
> + function = "blsp_i2c3";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c3_sleep: i2c3-sleep {
> + pins = "gpio10", "gpio11";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> i2c4_default: i2c4-default {
> pins = "gpio14", "gpio15";
> function = "blsp_i2c4";
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index 402e891a84ab..1045d7e518f3 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -1528,6 +1528,21 @@
> status = "disabled";
> };
>
> + blsp_i2c3: i2c@78b7000 {
> + compatible = "qcom,i2c-qup-v2.2.1";
> + reg = <0x078b7000 0x500>;
> + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_AHB_CLK>,
> + <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
> + clock-names = "iface", "core";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&i2c3_default>;
> + pinctrl-1 = <&i2c3_sleep>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> blsp_spi3: spi@78b7000 {
> compatible = "qcom,spi-qup-v2.2.1";
> reg = <0x078b7000 0x500>;
> --
> 2.17.1
>
next prev parent reply other threads:[~2021-01-24 15:55 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-24 13:54 [PATCH 0/3] Add initial support for BQ Aquaris X5 Jonathan Albrieux
2021-01-24 13:54 ` [PATCH 1/3] arm64: dts: qcom: Add device tree for BQ Aquaris X5 (Longcheer L8910) Jonathan Albrieux
2021-01-24 15:12 ` Konrad Dybcio
2021-01-24 15:45 ` Stephan Gerhold
2021-01-24 13:54 ` [PATCH 2/3] arm64: dts: qcom: msm8916: Add blsp_i2c3 Jonathan Albrieux
2021-01-24 15:09 ` Konrad Dybcio
2021-01-24 15:52 ` Stephan Gerhold [this message]
2021-01-24 13:54 ` [PATCH 3/3] arm64: dts: qcom: msm8916-longcheer-l8910: Add imu/magnetometer Jonathan Albrieux
2021-01-24 15:07 ` Konrad Dybcio
2021-01-24 15:51 ` Stephan Gerhold
2021-01-24 19:49 ` Jonathan Albrieux
2021-01-28 4:22 ` Bjorn Andersson
2021-01-24 21:01 ` [PATCH 0/3] Add initial support for BQ Aquaris X5 Pavel Machek
2021-01-24 21:49 ` Stephan Gerhold
2021-01-27 22:24 ` Pavel Machek
2021-01-28 9:27 ` Stephan Gerhold
2021-02-02 13:13 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YA2XyLbrEzN3tvJr@gerhold.net \
--to=stephan@gerhold.net \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathan.albrieux@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).