Re: [PATCH 2/2] net: Add driver for LiteX's LiteETH network interface

[Andrew Lunn <andrew@lunn.ch>]

> +static void liteeth_reset_hw(struct liteeth *priv)
> +{
> +	/* Reset, twice */
> +	writeb(0, priv->base + LITEETH_PHY_CRG_RESET);
> +	udelay(10);
> +	writeb(1, priv->base + LITEETH_PHY_CRG_RESET);
> +	udelay(10);
> +	writeb(0, priv->base + LITEETH_PHY_CRG_RESET);
> +	udelay(10);

What is this actually resetting?

> +static int liteeth_probe(struct platform_device *pdev)
> +{
> +	struct net_device *netdev;
> +	void __iomem *buf_base;
> +	struct resource *res;
> +	struct liteeth *priv;
> +	int irq, err;
> +
> +	netdev = alloc_etherdev(sizeof(*priv));
> +	if (!netdev)
> +		return -ENOMEM;
> +
> +	priv = netdev_priv(netdev);
> +	priv->netdev = netdev;
> +	priv->dev = &pdev->dev;
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0) {
> +		dev_err(&pdev->dev, "Failed to get IRQ\n");
> +		goto err;
> +	}
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	priv->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(priv->base)) {
> +		err = PTR_ERR(priv->base);
> +		goto err;
> +	}
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> +	priv->mdio_base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(priv->mdio_base)) {
> +		err = PTR_ERR(priv->mdio_base);
> +		goto err;
> +	}

So you don't have any PHY handling, or any MDIO bus master code. So i
would drop this, until the MDIO architecture question is answered. I
also wonder how much use the MAC driver is without any PHY code?
Unless you have a good reason, i don't think we should merge this
until it makes the needed calls into phylib. It is not much code to
add.

	Andrew