linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Martin Liška" <mliska@suse.cz>
To: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org,
	Arnaldo Carvalho de Melo <acme@kernel.org>
Subject: [PATCH] perf annotate: improve --stdio mode
Date: Sun, 21 Feb 2021 13:46:36 +0100	[thread overview]
Message-ID: <a0d53f31-f633-5013-c386-a4452391b081@suse.cz> (raw)

The patch changes the output format in 2 ways:
- line number is displayed for all source lines (matching TUI mode)
- source locations for the hottest lines are printed
   at the line end in order to preserve layout

Before:

     0.00 :   405ef1: inc    %r15
          :            tmpsd * (TD + tmpsd * TDD)));
     0.01 :   405ef4: vfmadd213sd 0x2b9b3(%rip),%xmm0,%xmm3        # 4318b0 <_IO_stdin_used+0x8b0>
          :            tmpsd * (TC +
  eff.c:1811    0.67 :   405efd: vfmadd213sd 0x2b9b2(%rip),%xmm0,%xmm3        # 4318b8 <_IO_stdin_used+0x8b8>
          :            TA + tmpsd * (TB +
     0.35 :   405f06: vfmadd213sd 0x2b9b1(%rip),%xmm0,%xmm3        # 4318c0 <_IO_stdin_used+0x8c0>
          :            dumbo =
  eff.c:1809    1.41 :   405f0f: vfmadd213sd 0x2b9b0(%rip),%xmm0,%xmm3        # 4318c8 <_IO_stdin_used+0x8c8>
          :            sumi -= sj * tmpsd * dij2i * dumbo;
  eff.c:1813    2.58 :   405f18: vmulsd %xmm3,%xmm0,%xmm0
     2.81 :   405f1c: vfnmadd213sd 0x30(%rsp),%xmm1,%xmm0
     3.78 :   405f23: vmovsd %xmm0,0x30(%rsp)
          :            for (k = 0; k < lpears[i] + upears[i]; k++) {
  eff.c:1761    0.90 :   405f29: cmp    %r15d,%r12d

After:

     0.00 :   405ef1: inc    %r15
          : 1812   tmpsd * (TD + tmpsd * TDD)));
     0.01 :   405ef4: vfmadd213sd 0x2b9b3(%rip),%xmm0,%xmm3        # 4318b0 <_IO_stdin_used+0x8b0>
          : 1811   tmpsd * (TC +
     0.67 :   405efd: vfmadd213sd 0x2b9b2(%rip),%xmm0,%xmm3        # 4318b8 <_IO_stdin_used+0x8b8> // eff.c:1811
          : 1810   TA + tmpsd * (TB +
     0.35 :   405f06: vfmadd213sd 0x2b9b1(%rip),%xmm0,%xmm3        # 4318c0 <_IO_stdin_used+0x8c0>
          : 1809   dumbo =
     1.41 :   405f0f: vfmadd213sd 0x2b9b0(%rip),%xmm0,%xmm3        # 4318c8 <_IO_stdin_used+0x8c8> // eff.c:1809
          : 1813   sumi -= sj * tmpsd * dij2i * dumbo;
     2.58 :   405f18: vmulsd %xmm3,%xmm0,%xmm0 // eff.c:1813
     2.81 :   405f1c: vfnmadd213sd 0x30(%rsp),%xmm1,%xmm0
     3.78 :   405f23: vmovsd %xmm0,0x30(%rsp)
          : 1761   for (k = 0; k < lpears[i] + upears[i]; k++) {

Where e.g. '// eff.c:1811' shares the same color as the percentantage
at the line beginning.

Signed-off-by: Martin Liška <mliska@suse.cz>
---
  tools/perf/util/annotate.c | 30 ++++++++++++++----------------
  1 file changed, 14 insertions(+), 16 deletions(-)

diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c
index e60841b86d27..80542012ec1b 100644
--- a/tools/perf/util/annotate.c
+++ b/tools/perf/util/annotate.c
@@ -1366,7 +1366,6 @@ annotation_line__print(struct annotation_line *al, struct symbol *sym, u64 start
  {
  	struct disasm_line *dl = container_of(al, struct disasm_line, al);
  	static const char *prev_line;
-	static const char *prev_color;
  
  	if (al->offset != -1) {
  		double max_percent = 0.0;
@@ -1405,20 +1404,6 @@ annotation_line__print(struct annotation_line *al, struct symbol *sym, u64 start
  
  		color = get_percent_color(max_percent);
  
-		/*
-		 * Also color the filename and line if needed, with
-		 * the same color than the percentage. Don't print it
-		 * twice for close colored addr with the same filename:line
-		 */
-		if (al->path) {
-			if (!prev_line || strcmp(prev_line, al->path)
-				       || color != prev_color) {
-				color_fprintf(stdout, color, " %s", al->path);
-				prev_line = al->path;
-				prev_color = color;
-			}
-		}
-
  		for (i = 0; i < nr_percent; i++) {
  			struct annotation_data *data = &al->data[i];
  			double percent;
@@ -1439,6 +1424,19 @@ annotation_line__print(struct annotation_line *al, struct symbol *sym, u64 start
  		printf(" : ");
  
  		disasm_line__print(dl, start, addr_fmt_width);
+
+		/*
+		 * Also color the filename and line if needed, with
+		 * the same color than the percentage. Don't print it
+		 * twice for close colored addr with the same filename:line
+		 */
+		if (al->path) {
+			if (!prev_line || strcmp(prev_line, al->path)) {
+				color_fprintf(stdout, color, " // %s", al->path);
+				prev_line = al->path;
+			}
+		}
+
  		printf("\n");
  	} else if (max_lines && printed >= max_lines)
  		return 1;
@@ -1454,7 +1452,7 @@ annotation_line__print(struct annotation_line *al, struct symbol *sym, u64 start
  		if (!*al->line)
  			printf(" %*s:\n", width, " ");
  		else
-			printf(" %*s:     %*s %s\n", width, " ", addr_fmt_width, " ", al->line);
+			printf(" %*s: %-*d %s\n", width, " ", addr_fmt_width, al->line_nr, al->line);
  	}
  
  	return 0;
-- 
2.30.1


             reply	other threads:[~2021-02-21 12:47 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-21 12:46 Martin Liška [this message]
2021-02-23 19:47 ` [PATCH] perf annotate: improve --stdio mode Arnaldo Carvalho de Melo
2021-02-26  9:24   ` Martin Liška
2021-03-19  9:38     ` Martin Liška
2021-04-07 19:28       ` Arnaldo Carvalho de Melo
2021-04-07 19:30     ` Arnaldo Carvalho de Melo
2021-04-07 20:25       ` Arnaldo Carvalho de Melo
2021-04-08 10:08         ` Martin Liška
2021-04-19  7:39           ` Martin Liška
2021-04-19 17:12             ` Arnaldo Carvalho de Melo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a0d53f31-f633-5013-c386-a4452391b081@suse.cz \
    --to=mliska@suse.cz \
    --cc=acme@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-perf-users@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).