From: Alexandre Torgue <alexandre.torgue@st.com>
To: Olivier Moysan <olivier.moysan@st.com>,
<linux-stm32@st-md-mailman.stormreply.com>, <robh@kernel.org>,
<mark.rutland@arm.com>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] ARM: dts: stm32: add DFSDM pins to stm32mp157c
Date: Fri, 2 Aug 2019 10:09:46 +0200 [thread overview]
Message-ID: <a95e5d74-c8e3-42f9-cabf-f42623aee255@st.com> (raw)
In-Reply-To: <1564645567-13156-1-git-send-email-olivier.moysan@st.com>
Hi Olivier
On 8/1/19 9:46 AM, Olivier Moysan wrote:
> Add DFSDM pins to stm32mp157c.
>
> Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
> ---
> arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 39 +++++++++++++++++++++++++++++++
> 1 file changed, 39 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
> index 9eaec9bf8cb8..f96a928cbc49 100644
> --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
> @@ -230,6 +230,45 @@
> };
> };
>
I use to only take pinconfig which are used in board. So please resend
with the "board patch".
regards
Alex
> + dfsdm_clkout_pins_a: dfsdm-clkout-pins-0 {
> + pins {
> + pinmux = <STM32_PINMUX('B', 13, AF3)>; /* DFSDM_CKOUT */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <0>;
> + };
> + };
> +
> + dfsdm_clkout_sleep_pins_a: dfsdm-clkout-sleep-pins-0 {
> + pins {
> + pinmux = <STM32_PINMUX('B', 13, ANALOG)>; /* DFSDM_CKOUT */
> + };
> + };
> +
> + dfsdm_data1_pins_a: dfsdm-data1-pins-0 {
> + pins {
> + pinmux = <STM32_PINMUX('C', 3, AF3)>; /* DFSDM_DATA1 */
> + };
> + };
> +
> + dfsdm_data1_sleep_pins_a: dfsdm-data1-sleep-pins-0 {
> + pins {
> + pinmux = <STM32_PINMUX('C', 3, ANALOG)>; /* DFSDM_DATA1 */
> + };
> + };
> +
> + dfsdm_data3_pins_a: dfsdm-data3-pins-0 {
> + pins {
> + pinmux = <STM32_PINMUX('F', 13, AF6)>; /* DFSDM_DATA3 */
> + };
> + };
> +
> + dfsdm_data3_sleep_pins_a: dfsdm-data3-sleep-pins-0 {
> + pins {
> + pinmux = <STM32_PINMUX('F', 13, ANALOG)>; /* DFSDM_DATA3 */
> + };
> + };
> +
> ethernet0_rgmii_pins_a: rgmii-0 {
> pins1 {
> pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
>
next prev parent reply other threads:[~2019-08-02 8:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-01 7:46 [PATCH] ARM: dts: stm32: add DFSDM pins to stm32mp157c Olivier Moysan
2019-08-02 8:09 ` Alexandre Torgue [this message]
2019-08-02 8:49 ` Olivier MOYSAN
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a95e5d74-c8e3-42f9-cabf-f42623aee255@st.com \
--to=alexandre.torgue@st.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mark.rutland@arm.com \
--cc=olivier.moysan@st.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).