From: Thomas Gleixner <tglx@linutronix.de>
To: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: steven.sistare@oracle.com, daniel.m.jordan@oracle.com,
linux@armlinux.org.uk, schwidefsky@de.ibm.com,
heiko.carstens@de.ibm.com, john.stultz@linaro.org,
sboyd@codeaurora.org, x86@kernel.org,
linux-kernel@vger.kernel.org, mingo@redhat.com, hpa@zytor.com,
douly.fnst@cn.fujitsu.com, peterz@infradead.org,
prarit@redhat.com, feng.tang@intel.com, pmladek@suse.com,
gnomes@lxorguk.ukuu.org.uk, linux-s390@vger.kernel.org,
boris.ostrovsky@oracle.com, jgross@suse.com, pbonzini@redhat.com
Subject: Re: [PATCH v15 00/26] Early boot time stamps
Date: Fri, 20 Jul 2018 00:34:26 +0200 (CEST) [thread overview]
Message-ID: <alpine.DEB.2.21.1807200029440.1693@nanos.tec.linutronix.de> (raw)
In-Reply-To: <20180719205545.16512-1-pasha.tatashin@oracle.com>
Pavel,
On Thu, 19 Jul 2018, Pavel Tatashin wrote:
> changelog
> ---------
> v15 - v14
I've applied the series to tip:x86/timers and pushed it out.
Thanks for the patience and for going the extra miles to reach your initial
goal of early TSC timestamps. The overall result looks very reasonable and
is not only a functional improvement: Quite some old ballast and duct tape
has been cleaned up on the way.
Thanks,
tglx
prev parent reply other threads:[~2018-07-19 22:34 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-19 20:55 [PATCH v15 00/26] Early boot time stamps Pavel Tatashin
2018-07-19 20:55 ` [PATCH v15 01/26] x86/kvmclock: Remove memblock dependency Pavel Tatashin
2018-07-19 22:21 ` [tip:x86/timers] " tip-bot for Pavel Tatashin
2018-07-19 20:55 ` [PATCH v15 02/26] x86/kvmclock: Remove page size requirement from wall_clock Pavel Tatashin
2018-07-19 22:22 ` [tip:x86/timers] " tip-bot for Thomas Gleixner
2018-07-19 20:55 ` [PATCH v15 03/26] x86/kvmclock: Decrapify kvm_register_clock() Pavel Tatashin
2018-07-19 22:23 ` [tip:x86/timers] " tip-bot for Thomas Gleixner
2018-07-19 20:55 ` [PATCH v15 04/26] x86/kvmclock: Cleanup the code Pavel Tatashin
2018-07-19 22:23 ` [tip:x86/timers] " tip-bot for Thomas Gleixner
2018-07-19 20:55 ` [PATCH v15 05/26] x86/kvmclock: Mark variables __initdata and __ro_after_init Pavel Tatashin
2018-07-19 22:24 ` [tip:x86/timers] " tip-bot for Thomas Gleixner
2018-07-19 20:55 ` [PATCH v15 06/26] x86/kvmclock: Move kvmclock vsyscall param and init to kvmclock Pavel Tatashin
2018-07-19 22:24 ` [tip:x86/timers] " tip-bot for Thomas Gleixner
2018-07-19 20:55 ` [PATCH v15 07/26] x86/kvmclock: Switch kvmclock data to a PER_CPU variable Pavel Tatashin
2018-07-19 22:25 ` [tip:x86/timers] " tip-bot for Thomas Gleixner
2018-07-19 20:55 ` [PATCH v15 08/26] x86: text_poke() may access uninitialized struct pages Pavel Tatashin
2018-07-19 22:25 ` [tip:x86/timers] x86/alternatives, jumplabel: Use text_poke_early() before mm_init() tip-bot for Pavel Tatashin
2018-07-19 20:55 ` [PATCH v15 09/26] x86: initialize static branching early Pavel Tatashin
2018-07-19 22:26 ` [tip:x86/timers] x86/jump_label: Initialize " tip-bot for Pavel Tatashin
2018-07-19 20:55 ` [PATCH v15 10/26] x86/CPU: Call detect_nopl() only on the BSP Pavel Tatashin
2018-07-19 22:26 ` [tip:x86/timers] " tip-bot for Borislav Petkov
2018-07-19 20:55 ` [PATCH v15 11/26] x86/tsc: redefine notsc to behave as tsc=unstable Pavel Tatashin
2018-07-19 22:27 ` [tip:x86/timers] x86/tsc: Redefine " tip-bot for Pavel Tatashin
2018-07-19 20:55 ` [PATCH v15 12/26] x86/xen/time: initialize pv xen time in init_hypervisor_platform Pavel Tatashin
2018-07-19 22:27 ` [tip:x86/timers] x86/xen/time: Initialize pv xen time in init_hypervisor_platform() tip-bot for Pavel Tatashin
2018-07-19 20:55 ` [PATCH v15 13/26] x86/xen/time: output xen sched_clock time from 0 Pavel Tatashin
2018-07-19 22:28 ` [tip:x86/timers] x86/xen/time: Output " tip-bot for Pavel Tatashin
2018-07-19 20:55 ` [PATCH v15 14/26] s390/time: add read_persistent_wall_and_boot_offset() Pavel Tatashin
2018-07-19 22:28 ` [tip:x86/timers] s390/time: Add read_persistent_wall_and_boot_offset() tip-bot for Pavel Tatashin
2018-07-19 20:55 ` [PATCH v15 15/26] time: replace read_boot_clock64() with read_persistent_wall_and_boot_offset() Pavel Tatashin
2018-07-19 22:29 ` [tip:x86/timers] timekeeping: Replace " tip-bot for Pavel Tatashin
2018-07-19 20:55 ` [PATCH v15 16/26] time: default boot time offset to local_clock() Pavel Tatashin
2018-07-19 22:29 ` [tip:x86/timers] timekeeping: Default " tip-bot for Pavel Tatashin
2018-07-19 20:55 ` [PATCH v15 17/26] s390/time: remove read_boot_clock64() Pavel Tatashin
2018-07-19 22:30 ` [tip:x86/timers] s390/time: Remove read_boot_clock64() tip-bot for Pavel Tatashin
2018-07-19 20:55 ` [PATCH v15 18/26] ARM/time: remove read_boot_clock64() Pavel Tatashin
2018-07-19 22:30 ` [tip:x86/timers] ARM/time: Remove read_boot_clock64() tip-bot for Pavel Tatashin
2018-07-19 20:55 ` [PATCH v15 19/26] x86/tsc: calibrate tsc only once Pavel Tatashin
2018-07-19 22:31 ` [tip:x86/timers] x86/tsc: Calibrate " tip-bot for Pavel Tatashin
2018-07-19 20:55 ` [PATCH v15 20/26] x86/tsc: initialize cyc2ns when tsc freq. is determined Pavel Tatashin
2018-07-19 22:31 ` [tip:x86/timers] x86/tsc: Initialize cyc2ns when tsc frequency " tip-bot for Pavel Tatashin
2018-07-19 20:55 ` [PATCH v15 21/26] x86/tsc: use tsc early Pavel Tatashin
2018-07-19 22:32 ` [tip:x86/timers] x86/tsc: Use TSC as sched clock early tip-bot for Pavel Tatashin
2018-07-19 20:55 ` [PATCH v15 22/26] sched: move sched clock initialization and merge with generic clock Pavel Tatashin
2018-07-19 22:32 ` [tip:x86/timers] sched/clock: Move " tip-bot for Pavel Tatashin
2018-07-19 20:55 ` [PATCH v15 23/26] sched: early boot clock Pavel Tatashin
2018-07-19 22:33 ` [tip:x86/timers] sched/clock: Enable sched clock early tip-bot for Pavel Tatashin
2018-07-24 19:52 ` Guenter Roeck
2018-07-24 20:22 ` Pavel Tatashin
2018-07-25 0:36 ` Pavel Tatashin
2018-07-25 1:24 ` Guenter Roeck
2018-07-25 2:05 ` Pavel Tatashin
2018-07-25 2:41 ` Pavel Tatashin
2018-07-30 12:36 ` Peter Zijlstra
2018-07-30 13:44 ` Pavel Tatashin
2018-07-20 8:09 ` [PATCH v15 23/26] sched: early boot clock Peter Zijlstra
2018-07-20 10:00 ` [tip:x86/timers] sched/clock: Close a hole in sched_clock_init() tip-bot for Peter Zijlstra
2018-11-06 5:42 ` [PATCH v15 23/26] sched: early boot clock Dominique Martinet
2018-11-06 11:35 ` Steven Sistare
2019-01-02 20:20 ` Salvatore Bonaccorso
2019-01-03 21:28 ` Pavel Tatashin
2019-01-03 23:43 ` Dominique Martinet
2019-01-07 18:17 ` Pavel Tatashin
2019-01-07 23:48 ` Dominique Martinet
2019-01-08 1:04 ` Pavel Tatashin
2019-01-08 1:09 ` Dominique Martinet
2019-01-26 2:04 ` Jon DeVree
2019-01-26 16:11 ` Pavel Tatashin
2019-01-04 7:30 ` [PATCH v15 23/26] sched: early boot clock (was Re: Bug#918036: linux: uptime after reboot wrong (kvm-clock related?)) Thorsten Glaser
2018-07-19 20:55 ` [PATCH v15 24/26] sched: use static key for sched_clock_running Pavel Tatashin
2018-07-19 22:33 ` [tip:x86/timers] sched/clock: Use " tip-bot for Pavel Tatashin
2018-07-19 20:55 ` [PATCH v15 25/26] x86/tsc: split native_calibrate_cpu() into early and late parts Pavel Tatashin
2018-07-19 22:34 ` [tip:x86/timers] x86/tsc: Split " tip-bot for Pavel Tatashin
2018-07-19 20:55 ` [PATCH v15 26/26] x86/tsc: use tsc_calibrate_cpu_early and pit_hpet_ptimer_calibrate_cpu Pavel Tatashin
2018-07-19 22:35 ` [tip:x86/timers] x86/tsc: Make use of tsc_calibrate_cpu_early() tip-bot for Pavel Tatashin
2018-07-19 22:34 ` Thomas Gleixner [this message]
[not found] <154644530361.2390.18185252504260044930.reportbug@ci-busyapps.lan.tarent.de>
[not found] ` <20190102163939.GB13145@eldamar.local>
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.21.1807200029440.1693@nanos.tec.linutronix.de \
--to=tglx@linutronix.de \
--cc=boris.ostrovsky@oracle.com \
--cc=daniel.m.jordan@oracle.com \
--cc=douly.fnst@cn.fujitsu.com \
--cc=feng.tang@intel.com \
--cc=gnomes@lxorguk.ukuu.org.uk \
--cc=heiko.carstens@de.ibm.com \
--cc=hpa@zytor.com \
--cc=jgross@suse.com \
--cc=john.stultz@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mingo@redhat.com \
--cc=pasha.tatashin@oracle.com \
--cc=pbonzini@redhat.com \
--cc=peterz@infradead.org \
--cc=pmladek@suse.com \
--cc=prarit@redhat.com \
--cc=sboyd@codeaurora.org \
--cc=schwidefsky@de.ibm.com \
--cc=steven.sistare@oracle.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).