From: Jiri Kosina <jkosina@suse.cz>
To: Henrik Rydberg <rydberg@euromail.se>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 16/20] HID: Only dump input if someone is listening
Date: Mon, 3 Sep 2012 15:17:02 +0200 (CEST) [thread overview]
Message-ID: <alpine.LNX.2.00.1209031515450.20709@pobox.suse.cz> (raw)
In-Reply-To: <20120902085211.GA604@polaris.bitmath.org>
On Sun, 2 Sep 2012, Henrik Rydberg wrote:
> > I have applied this one right away, so you can drop it from your series.
> > The remaining ones I am still about to review (currently travelling).
>
> Great, thanks. The notification callback can also be applied if you want.
>
> > There is no inter-dependency between the Input and HID ones, and so we can
> > handle them with Dmitry as two independent Input and HID series, right?
>
> Not quite, I am afraid. Some of the overlap has disappeared, true.
> However, the hid-multitouch patches depend on new variables defined in
> the input-mt patches, which in turn depend on the input core
> changes. The hid-multitouch patches will apply (with a tiny merge
> conflict), but they will not compile.
>
> I can split the input-core and hid-core changes into separate sets,
> and those could be applied separately. The input-mt and bcm5974 will
> then build on input-core, and hid-multitouch will build on both
> input-core and hid-core. I am not sure if this helps anyone, though.
I don't think so.
Let's wait once Dmitry is finished with the input changes, and I can
either take the set through my tree with his Signed-off-by: on the Input
patches, or vice-versa.
Thanks,
--
Jiri Kosina
SUSE Labs
next prev parent reply other threads:[~2012-09-03 13:17 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-01 19:46 [PATCH v3 v3 00/20] Input and HID updates for 3.7 Henrik Rydberg
2012-09-01 19:46 ` [PATCH v3 01/20] Input: Break out MT data Henrik Rydberg
2012-09-13 5:15 ` Dmitry Torokhov
2012-09-13 17:58 ` Henrik Rydberg
2012-09-01 19:46 ` [PATCH v3 02/20] Input: Improve the events-per-packet estimate Henrik Rydberg
2012-09-13 5:16 ` Dmitry Torokhov
2012-09-01 19:46 ` [PATCH v3 03/20] Input: Make sure we follow all EV_KEY events Henrik Rydberg
2012-09-13 5:19 ` Dmitry Torokhov
2012-09-01 19:46 ` [PATCH v3 04/20] Input: Move autorepeat to the event-passing phase Henrik Rydberg
2012-09-01 19:47 ` [PATCH v3 05/20] Input: Send events one packet at a time Henrik Rydberg
2012-09-13 6:56 ` Dmitry Torokhov
2012-09-13 17:59 ` Henrik Rydberg
2012-09-01 19:47 ` [PATCH v3 06/20] Input: evdev - Add the events() callback Henrik Rydberg
2012-09-01 19:47 ` [PATCH v3 07/20] Input: MT - Add flags to input_mt_init_slots() Henrik Rydberg
2012-09-01 19:47 ` [PATCH v3 08/20] Input: MT - Handle frame synchronization in core Henrik Rydberg
2012-09-01 19:47 ` [PATCH v3 09/20] Input: MT - Add in-kernel tracking Henrik Rydberg
2012-09-01 19:47 ` [PATCH v3 10/20] Input: MT - Get slot by key Henrik Rydberg
2012-09-01 19:47 ` [PATCH v3 11/20] Input: bcm5974 - only setup button urb for TYPE1 devices Henrik Rydberg
2012-09-01 19:47 ` [PATCH v3 12/20] Input: bcm5974 - Preparatory renames Henrik Rydberg
2012-09-01 19:47 ` [PATCH v3 13/20] Input: bcm5974 - Drop pressure and width emulation Henrik Rydberg
2012-09-13 6:57 ` Dmitry Torokhov
2012-09-13 18:41 ` Henrik Rydberg
2012-09-01 19:47 ` [PATCH v3 14/20] Input: bcm5974 - Drop the logical dimensions Henrik Rydberg
2012-09-01 19:47 ` [PATCH v3 15/20] Input: bcm5974 - Convert to MT-B Henrik Rydberg
2012-09-01 19:47 ` [PATCH v3 16/20] HID: Only dump input if someone is listening Henrik Rydberg
2012-09-02 7:28 ` Jiri Kosina
2012-09-02 8:52 ` Henrik Rydberg
2012-09-03 13:17 ` Jiri Kosina [this message]
2012-09-06 20:57 ` Henrik Rydberg
2012-09-07 1:54 ` Ping Cheng
2012-09-07 12:52 ` Jiri Kosina
2012-09-10 19:02 ` Henrik Rydberg
2012-09-10 20:49 ` Jiri Kosina
2012-09-10 21:12 ` Dmitry Torokhov
2012-09-14 19:25 ` Henrik Rydberg
2012-09-15 15:33 ` Input and HID updates for 3.7, version 4 Henrik Rydberg
2012-09-18 11:29 ` Jiri Kosina
2012-09-18 16:19 ` Henrik Rydberg
2012-09-19 16:57 ` Dmitry Torokhov
2012-09-19 18:34 ` Henrik Rydberg
2012-09-01 19:47 ` [PATCH v3 17/20] HID: Add an input configured notification callback Henrik Rydberg
2012-09-01 19:47 ` Henrik Rydberg
2012-09-01 19:47 ` [PATCH v3 19/20] HID: hid-multitouch: Remove the redundant touch state Henrik Rydberg
2012-09-01 19:47 ` [PATCH 20/20] HID: hid-multitouch: Add missing contact count detection Henrik Rydberg
2012-09-03 12:59 ` Benjamin Tissoires
2012-09-03 17:07 ` Henrik Rydberg
2012-09-05 15:09 ` [PATCH v2 20/20] HID: hid-multitouch: Fix contact count on 3M panels Henrik Rydberg
2012-09-03 13:00 ` [PATCH v3 v3 00/20] Input and HID updates for 3.7 Benjamin Tissoires
2012-09-03 17:08 ` Henrik Rydberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LNX.2.00.1209031515450.20709@pobox.suse.cz \
--to=jkosina@suse.cz \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rydberg@euromail.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).