Re: [REGRESSION] Unable to NAT own TCP packets from another VRF with tcp_l3mdev_accept = 1

[Thorsten Leemhuis <regressions@leemhuis.info>]

Hi, this is your Linux kernel regression tracker.

CCing the regression mailing list, as it should be in the loop for all
regressions, as explained here:
https://www.kernel.org/doc/html/latest/admin-guide/reporting-issues.html

Also adding the author of the bisected commit, Mike Manning to the list
of recipients.

For the rest of this mail:
[TLDR: I'm adding this regression report to the list of tracked
regressions; all text from me you find below is based on a few templates
paragraphs you might have encountered already already in similar form.]

On 28.09.22 16:02, Maximilien Cuony wrote:
> 
> We're using VRF with a machine used as a router and have a specific
> issue where the router doesn't handle his own packets correctly during
> NATing if the packet is coming from a different VRF.
> 
> We had the issue with debian buster (4.19), but the issue solved itself
> when we updated to debian bullseye (5.10.92).
> 
> However, during an upgrade of debian bullseye to the latest kernel, the
> issue appeared again (5.10.140).
> 
> We did a bisection and this leaded us to
> "b0d67ef5b43aedbb558b9def2da5b4fffeb19966 net: allow unbound socket for
> packets in VRF when tcp_l3mdev_accept set [ Upstream commit
> 944fd1aeacb627fa617f85f8e5a34f7ae8ea4d8e ]".
> 
> Simplified case setup:
> 
> There is two machines in the setup. They both forward packets
> (net.ipv4.ip_forward = 1) and there is two interface between them.
> 
> The main machine has two VRF. The default VRF is using the second
> machine as the default route, on a specific interface.
> The second machine has as default route to main machine, on the other
> VRF using the second pair of interfaces.
> 
> On the main machine, the second interface is in a specific VRF. In that
> VRF, packets are NATed to the internet on a third interface.
> 
> A visual schema with the normal flow is available there:
> https://etinacra.ch/kernel.png
> 
> Configuration command:
> 
> Main machine:
> sysctl -w net.ipv4.tcp_l3mdev_accept = 1
> sysctl -w systnet.ipv4.ip_forward = 1
> iptables -t raw -A PREROUTING -i eth0 -j CT --zone 5
> iptables -t raw -A OUTPUT -o eth0 -j CT --zone 5
> iptables -t nat -A POSTROUTING -o eth2 -j SNAT --to 192.168.1.1
> cat /etc/network/interfaces
> 
> auto firewall
> iface firewall
>     vrf-table 1200
> 
> auto eth0
> iface eth0
>     address 192.168.5.1/24
>     gateway 192.168.5.2
> 
> auto eth1
> iface eth1
>     address 192.168.10.1/24
>     vrf firewall
>     up ip route add 192.168.5.0/24 via 192.168.10.2 vrf firewall
> 
> auto eth2
> iface eth2
>     address 192.168.1.1/24
>     gateway 192.168.1.250
>     vrf firewall
> 
> ==
> 
> Second machine:
> 
> sysctl -w net.ipv4.ip_forward = 1
> 
> cat /etc/network/interfaces
> 
> auto eth0
> iface eth0
>     address 192.168.5.2/24
> 
> auto eth1
> iface eth1
>     address 192.168.10.2/24
>     gateway 192.168.10.1
> 
> ==
> 
> Without issue, if we look at a tcpdump on all interface on the main
> machine, everything is fine (output truncated):
> 
> 10:28:32.811283 eth0 Out IP 192.168.5.1.55750 > 99.99.99.99.80: Flags
> [S], seq 2216112145
> 10:28:32.811666 eth1 In  IP 192.168.5.1.55750 > 99.99.99.99.80: Flags
> [S], seq 2216112145
> 10:28:32.811679 eth2 Out IP 192.168.1.1.55750 > 99.99.99.99.80: Flags
> [S], seq 2216112145
> 10:28:32.835138 eth2 In  IP 99.99.99.99.80 > 192.168.1.1.55750: Flags
> [S.], seq 383992840, ack 2216112146
> 10:28:32.835152 eth1 Out IP 99.99.99.99.80 > 192.168.5.1.55750: Flags
> [S.], seq 383992840, ack 2216112146
> 10:28:32.835457 eth0 In  IP 99.99.99.99.80 > 192.168.5.1.55750: Flags
> [S.], seq 383992840, ack 2216112146
> 10:28:32.835511 eth0 Out IP 192.168.5.1.55750 > 99.99.99.99.80: Flags
> [.], ack 1, win 502
> 
> However when the issue is present, the SYNACK does arrives on eth2, but
> is never "unNATed" back to eth1:
> 
> 10:25:07.644433 eth0 Out IP 192.168.5.1.48684 > 99.99.99.99.80: Flags
> [S], seq 3207393154
> 10:25:07.644782 eth1 In  IP 192.168.5.1.48684 > 99.99.99.99.80: Flags
> [S], seq 3207393154
> 10:25:07.644793 eth2 Out IP 192.168.1.1.48684 > 99.99.99.99.80: Flags
> [S], seq 3207393154
> 10:25:07.668551 eth2 In  IP 54.36.61.42.80 > 192.168.1.1.48684: Flags
> [S.], seq 823335485, ack 3207393155
> 
> The issue is only with TCP connections. UDP or ICMP works fine.
> 
> Turing off net.ipv4.tcp_l3mdev_accept back to 0 also fix the issue, but
> we need this flag since we use some sockets that does not understand VRFs.
> 
> We did have a look at the diff and the code of inet_bound_dev_eq, but we
> didn't understand much the real problem - but it does seem now that
> bound_dev_if if now checked not to be False before the bound_dev_if ==
> dif || bound_dev_if == sdif comparison, something that was not the case
> before (especially since it's dependent on l3mdev_accept).
> 
> Maybe our setup is wrong and we should not be able to route packets like
> that?
> 
> Thanks a lot and have a nice day!
> 
> Maximilien Cuony

Thanks for the report. To be sure below issue doesn't fall through the
cracks unnoticed, I'm adding it to regzbot, my Linux kernel regression
tracking bot:

#regzbot ^introduced b0d67ef5b43aedbb558b9d
#regzbot ignore-activity

This isn't a regression? This issue or a fix for it are already
discussed somewhere else? It was fixed already? You want to clarify when
the regression started to happen? Or point out I got the title or
something else totally wrong? Then just reply -- ideally with also
telling regzbot about it, as explained here:
https://linux-regtracking.leemhuis.info/tracked-regression/

Reminder for developers: When fixing the issue, add 'Link:' tags
pointing to the report (the mail this one replies to), as explained for
in the Linux kernel's documentation; above webpage explains why this is
important for tracked regressions.