From: Jose Abreu <Jose.Abreu@synopsys.com>
To: netdev@vger.kernel.org
Cc: Joao Pinto <Joao.Pinto@synopsys.com>,
Jose Abreu <Jose.Abreu@synopsys.com>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Jose Abreu <Jose.Abreu@synopsys.com>,
"David S. Miller" <davem@davemloft.net>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH net 11/11] net: stmmac: Fix the TX IOC in xmit path
Date: Wed, 6 Nov 2019 16:03:05 +0100 [thread overview]
Message-ID: <b8d2676910857e8cede306c3fb140bd8fccf9ad3.1573052379.git.Jose.Abreu@synopsys.com> (raw)
In-Reply-To: <cover.1573052378.git.Jose.Abreu@synopsys.com>
In-Reply-To: <cover.1573052378.git.Jose.Abreu@synopsys.com>
IOC bit must be only set in the last descriptor. Move the logic up a
little bit to make sure it's set in the correct descriptor.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 64 ++++++++++++-----------
1 file changed, 34 insertions(+), 30 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index b0a16d7c6e3d..f826365c979d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3024,6 +3024,19 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
/* Only the last descriptor gets to point to the skb. */
tx_q->tx_skbuff[tx_q->cur_tx] = skb;
+ /* Manage tx mitigation */
+ tx_q->tx_count_frames += nfrags + 1;
+ if (likely(priv->tx_coal_frames > tx_q->tx_count_frames) &&
+ !((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+ priv->hwts_tx_en)) {
+ stmmac_tx_timer_arm(priv, queue);
+ } else {
+ desc = &tx_q->dma_tx[tx_q->cur_tx];
+ tx_q->tx_count_frames = 0;
+ stmmac_set_tx_ic(priv, desc);
+ priv->xstats.tx_set_ic_bit++;
+ }
+
/* We've used all descriptors we need for this skb, however,
* advance cur_tx so that it references a fresh descriptor.
* ndo_start_xmit will fill this descriptor the next time it's
@@ -3041,19 +3054,6 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
priv->xstats.tx_tso_frames++;
priv->xstats.tx_tso_nfrags += nfrags;
- /* Manage tx mitigation */
- tx_q->tx_count_frames += nfrags + 1;
- if (likely(priv->tx_coal_frames > tx_q->tx_count_frames) &&
- !(priv->synopsys_id >= DWMAC_CORE_4_00 &&
- (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
- priv->hwts_tx_en)) {
- stmmac_tx_timer_arm(priv, queue);
- } else {
- tx_q->tx_count_frames = 0;
- stmmac_set_tx_ic(priv, desc);
- priv->xstats.tx_set_ic_bit++;
- }
-
if (priv->sarc_type)
stmmac_set_desc_sarc(priv, first, priv->sarc_type);
@@ -3225,6 +3225,27 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
/* Only the last descriptor gets to point to the skb. */
tx_q->tx_skbuff[entry] = skb;
+ /* According to the coalesce parameter the IC bit for the latest
+ * segment is reset and the timer re-started to clean the tx status.
+ * This approach takes care about the fragments: desc is the first
+ * element in case of no SG.
+ */
+ tx_q->tx_count_frames += nfrags + 1;
+ if (likely(priv->tx_coal_frames > tx_q->tx_count_frames) &&
+ !((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+ priv->hwts_tx_en)) {
+ stmmac_tx_timer_arm(priv, queue);
+ } else {
+ if (likely(priv->extend_desc))
+ desc = &tx_q->dma_etx[entry].basic;
+ else
+ desc = &tx_q->dma_tx[entry];
+
+ tx_q->tx_count_frames = 0;
+ stmmac_set_tx_ic(priv, desc);
+ priv->xstats.tx_set_ic_bit++;
+ }
+
/* We've used all descriptors we need for this skb, however,
* advance cur_tx so that it references a fresh descriptor.
* ndo_start_xmit will fill this descriptor the next time it's
@@ -3260,23 +3281,6 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
dev->stats.tx_bytes += skb->len;
- /* According to the coalesce parameter the IC bit for the latest
- * segment is reset and the timer re-started to clean the tx status.
- * This approach takes care about the fragments: desc is the first
- * element in case of no SG.
- */
- tx_q->tx_count_frames += nfrags + 1;
- if (likely(priv->tx_coal_frames > tx_q->tx_count_frames) &&
- !(priv->synopsys_id >= DWMAC_CORE_4_00 &&
- (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
- priv->hwts_tx_en)) {
- stmmac_tx_timer_arm(priv, queue);
- } else {
- tx_q->tx_count_frames = 0;
- stmmac_set_tx_ic(priv, desc);
- priv->xstats.tx_set_ic_bit++;
- }
-
if (priv->sarc_type)
stmmac_set_desc_sarc(priv, first, priv->sarc_type);
--
2.7.4
next prev parent reply other threads:[~2019-11-06 15:03 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-06 15:02 [PATCH net 00/11] net: stmmac: Fixes for -net Jose Abreu
2019-11-06 15:02 ` [PATCH net 01/11] net: stmmac: gmac4: bitrev32 returns u32 Jose Abreu
2019-11-06 15:02 ` [PATCH net 02/11] net: stmmac: xgmac: " Jose Abreu
2019-11-06 15:02 ` [PATCH net 03/11] net: stmmac: selftests: Prevent false positives in filter tests Jose Abreu
2019-11-06 15:02 ` [PATCH net 04/11] net: stmmac: xgmac: Only get SPH header len if available Jose Abreu
2019-11-06 15:02 ` [PATCH net 05/11] net: stmmac: xgmac: Fix TSA selection Jose Abreu
2019-11-06 15:03 ` [PATCH net 06/11] net: stmmac: xgmac: Fix AV Feature detection Jose Abreu
2019-11-06 15:03 ` [PATCH net 07/11] net: stmmac: xgmac: Disable Flow Control when 1 or more queues are in AV Jose Abreu
2019-11-06 15:03 ` [PATCH net 08/11] net: stmmac: xgmac: Disable MMC interrupts by default Jose Abreu
2019-11-06 15:03 ` [PATCH net 09/11] net: stmmac: Fix the packet count in stmmac_rx() Jose Abreu
2019-11-06 15:03 ` [PATCH net 10/11] net: stmmac: Fix TSO descriptor with Enhanced Addressing Jose Abreu
2019-11-06 15:03 ` Jose Abreu [this message]
2019-11-07 5:23 ` [PATCH net 00/11] net: stmmac: Fixes for -net David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b8d2676910857e8cede306c3fb140bd8fccf9ad3.1573052379.git.Jose.Abreu@synopsys.com \
--to=jose.abreu@synopsys.com \
--cc=Joao.Pinto@synopsys.com \
--cc=alexandre.torgue@st.com \
--cc=davem@davemloft.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).