From: Georgi Djakov <georgi.djakov@linaro.org>
To: Sravanthi Kollukuduru <skolluku@codeaurora.org>,
dri-devel@lists.freedesktop.org, linux-arm-msm@vger.kernel.org,
freedreno@lists.freedesktop.org, devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, robdclark@gmail.com,
seanpaul@chromium.org, sean@poorly.run
Subject: Re: [PATCH v3 2/3] drm/msm/dpu: Integrate interconnect API in MDSS
Date: Wed, 19 Dec 2018 16:37:27 +0200 [thread overview]
Message-ID: <bbe80ea8-52ef-3942-9691-eaad19eb996a@linaro.org> (raw)
In-Reply-To: <20181122090653.3523-3-skolluku@codeaurora.org>
Hi Sravanthi,
Thanks for the patch!
On 11/22/18 11:06, Sravanthi Kollukuduru wrote:
> The interconnect framework is designed to provide a
> standard kernel interface to control the settings of
> the interconnects on a SoC.
>
> The interconnect API uses a consumer/provider-based model,
> where the providers are the interconnect buses and the
> consumers could be various drivers.
>
> MDSS is one of the interconnect consumers which uses the
> interconnect APIs to get the path between endpoints and
> set its bandwidth/latency/QoS requirements for the given
> interconnected path.
>
> Changes in v2:
> - Remove error log and unnecessary check (Jordan Crouse)
>
> Changes in v3:
> - Code clean involving variable name change, removal
> of extra paranthesis and variables (Matthias Kaehlcke)
>
> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 49 ++++++++++++++++++++++++++++----
> 1 file changed, 44 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
> index 38576f8b90b6..1387a6b1b39e 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
> @@ -4,10 +4,12 @@
> */
>
> #include "dpu_kms.h"
> +#include <linux/interconnect.h>
>
> #define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
>
> -#define HW_INTR_STATUS 0x0010
> +#define HW_INTR_STATUS 0x0010
Unrelated change?
> +#define MAX_BW 6800000
In what units? Maybe add a comment.
>
> struct dpu_mdss {
> struct msm_mdss base;
> @@ -16,8 +18,30 @@ struct dpu_mdss {
> u32 hwversion;
> struct dss_module_power mp;
> struct dpu_irq_controller irq_controller;
> + struct icc_path *path[2];
> + u32 num_paths;
> };
>
> +static int dpu_mdss_parse_data_bus_icc_path(
> + struct drm_device *dev, struct dpu_mdss *dpu_mdss)
Nit: Lines should not end with a '('. Please move the first argument up:
static int dpu_mdss_parse_data_bus_icc_path(struct drm_device *dev,
struct dpu_mdss *dpu_mdss)
> +{
> + struct icc_path *path0 = of_icc_get(dev->dev, "port0");
> + struct icc_path *path1 = of_icc_get(dev->dev, "port1");
In DT it's preferred that the name contains both the source and
destination, so maybe of_icc_get(dev->dev, "mdp0-mem") etc.
> +
> + if (IS_ERR(path0))
> + return PTR_ERR(path0);
> +
> + dpu_mdss->path[0] = path0;
> + dpu_mdss->num_paths = 1;
> +
> + if (!IS_ERR(path1)) {
> + dpu_mdss->path[1] = path1;
> + dpu_mdss->num_paths++;
> + }
> +
> + return 0;
> +}
> +
> static irqreturn_t dpu_mdss_irq(int irq, void *arg)
> {
> struct dpu_mdss *dpu_mdss = arg;
> @@ -127,7 +151,11 @@ static int dpu_mdss_enable(struct msm_mdss *mdss)
> {
> struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
> struct dss_module_power *mp = &dpu_mdss->mp;
> - int ret;
> + int ret, i;
> + u64 avg_bw = dpu_mdss->num_paths ? MAX_BW/dpu_mdss->num_paths : 0;
Nit: Please add spaces around "/"
> +
> + for (i = 0; i < dpu_mdss->num_paths; i++)
> + icc_set(dpu_mdss->path[i], avg_bw, MAX_BW);
Now we have macros in the header, that can be used to specify the
bandwidth units. So please use kBps_to_icc or MBps_to_icc etc. If we
decide in the future to change the internal units, we will be able to do
it without touching the users.
Thanks,
Georgi
>
> ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true);
> if (ret)
> @@ -140,12 +168,15 @@ static int dpu_mdss_disable(struct msm_mdss *mdss)
> {
> struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
> struct dss_module_power *mp = &dpu_mdss->mp;
> - int ret;
> + int ret, i;
>
> ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, false);
> if (ret)
> DPU_ERROR("clock disable failed, ret:%d\n", ret);
>
> + for (i = 0; i < dpu_mdss->num_paths; i++)
> + icc_set(dpu_mdss->path[i], 0, 0);
> +
> return ret;
> }
>
> @@ -155,6 +186,7 @@ static void dpu_mdss_destroy(struct drm_device *dev)
> struct msm_drm_private *priv = dev->dev_private;
> struct dpu_mdss *dpu_mdss = to_dpu_mdss(priv->mdss);
> struct dss_module_power *mp = &dpu_mdss->mp;
> + int i;
>
> pm_runtime_disable(dev->dev);
> _dpu_mdss_irq_domain_fini(dpu_mdss);
> @@ -162,6 +194,9 @@ static void dpu_mdss_destroy(struct drm_device *dev)
> msm_dss_put_clk(mp->clk_config, mp->num_clk);
> devm_kfree(&pdev->dev, mp->clk_config);
>
> + for (i = 0; i < dpu_mdss->num_paths; i++)
> + icc_put(dpu_mdss->path[i]);
> +
> if (dpu_mdss->mmio)
> devm_iounmap(&pdev->dev, dpu_mdss->mmio);
> dpu_mdss->mmio = NULL;
> @@ -200,6 +235,10 @@ int dpu_mdss_init(struct drm_device *dev)
> }
> dpu_mdss->mmio_len = resource_size(res);
>
> + ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);
> + if (ret)
> + return ret;
> +
> mp = &dpu_mdss->mp;
> ret = msm_dss_parse_clock(pdev, mp);
> if (ret) {
> @@ -221,14 +260,14 @@ int dpu_mdss_init(struct drm_device *dev)
> goto irq_error;
> }
>
> + priv->mdss = &dpu_mdss->base;
> +
> pm_runtime_enable(dev->dev);
>
> pm_runtime_get_sync(dev->dev);
> dpu_mdss->hwversion = readl_relaxed(dpu_mdss->mmio);
> pm_runtime_put_sync(dev->dev);
>
> - priv->mdss = &dpu_mdss->base;
> -
> return ret;
>
> irq_error:
>
next prev parent reply other threads:[~2018-12-19 14:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-22 9:06 [PATCH v3 0/3] Use interconnect API in MDSS on SDM845 Sravanthi Kollukuduru
2018-11-22 9:06 ` [PATCH v3 1/3] drm/msm/dpu: clean up references of DPU custom bus scaling Sravanthi Kollukuduru
2018-11-22 9:06 ` [PATCH v3 2/3] drm/msm/dpu: Integrate interconnect API in MDSS Sravanthi Kollukuduru
2018-12-19 14:37 ` Georgi Djakov [this message]
2018-11-22 9:06 ` [PATCH v3 3/3] dt-bindings: msm/disp: Introduce interconnect bindings for MDSS on SDM845 Sravanthi Kollukuduru
2018-12-17 22:17 ` Rob Herring
2018-12-19 14:43 ` Georgi Djakov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bbe80ea8-52ef-3942-9691-eaad19eb996a@linaro.org \
--to=georgi.djakov@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robdclark@gmail.com \
--cc=sean@poorly.run \
--cc=seanpaul@chromium.org \
--cc=skolluku@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).