Re: [LKP] Re: [mm/gup] a308c71bf1: stress-ng.vm-splice.ops_per_sec -95.6% regression

[Xing Zhengjun <zhengjun.xing@linux.intel.com>]

On 11/6/2020 2:37 AM, Linus Torvalds wrote:
> On Thu, Nov 5, 2020 at 12:29 AM Xing Zhengjun
> <zhengjun.xing@linux.intel.com> wrote:
>>
>>> Rong - mind testing this? I don't think the zero-page _should_ be
>>> something that real loads care about, but hey, maybe people do want to
>>> do things like splice zeroes very efficiently..
>>
>> I test the patch, the regression still existed.
> 
> Thanks.
> 
> So Jann's suspicion seems interesting but apparently not the reason
> for this particular case.
> 
> For being such a _huge_ difference (20x improvement followed by a 20x
> regression), it's surprising how little the numbers give a clue. The
> big changes are things like
> "interrupts.CPU19.CAL:Function_call_interrupts", but while those
> change by hundreds of percent, most of the changes seem to just be
> about them moving to different CPU's. IOW, we have things like
> 
>        5652 ± 59%    +387.9%      27579 ± 96%
> interrupts.CPU13.CAL:Function_call_interrupts
>       28249 ± 32%     -69.3%       8675 ± 50%
> interrupts.CPU28.CAL:Function_call_interrupts
> 
> which isn't really much of a change at all despite the changes looking
> very big - it's just the stats jumping from one CPU to another.
> 
> Maybe there's some actual change in there, but it's very well hidden if so.
> 
> Yes, some of the numbers get worse:
> 
>      868396 ±  3%     +20.9%    1050234 ± 14%
> interrupts.RES:Rescheduling_interrupts
> 
> so that's a 20% increase in rescheduling interrupts,  But it's a 20%
> increase, not a 500% one. So the fact that performance changes by 20x
> is still very unclear to me.
> 
> We do have a lot of those numa-meminfo changes, but they could just
> come from allocation patterns.
> 
> That said - another difference between the fast-cup code and the
> regular gup code is that the fast-gup code does
> 
>                  if (pte_protnone(pte))
>                          goto pte_unmap;
> 
> and the regular slow case does
> 
>          if ((flags & FOLL_NUMA) && pte_protnone(pte))
>                  goto no_page;
> 
> now, FOLL_NUMA is always set in the slow case if we don't have
> FOLL_FORCE set, so this difference isn't "real", but it's one of those
> cases where the zero-page might be marked for NUMA faulting, and doing
> the forced COW might then cause it to be accessible.
> 
> Just out of curiosity, do the numbers change enormously if you just remove that
> 
>                  if (pte_protnone(pte))
>                          goto pte_unmap;
> 
> test from the fast-cup case (top of the loop in gup_pte_range()) -
> effectively making fast-gup basically act like FOLL_FORCE wrt numa
> placement..

Based on the last debug patch, I removed the two lines code at the top 
of the loop in gup_pte_range() as you mentioned, the regression still 
existed.

=========================================================================================
tbox_group/testcase/rootfs/kconfig/compiler/nr_threads/disk/testtime/class/cpufreq_governor/ucode:
 
lkp-csl-2sp5/stress-ng/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/100%/1HDD/30s/pipe/performance/0x5002f01

commit:
   1a0cf26323c80e2f1c58fc04f15686de61bfab0c
   a308c71bf1e6e19cc2e4ced31853ee0fc7cb439a
   da5ba9980aa2211c1e2a89fc814abab2fea6f69d (last debug patch)
   8803d304738b52f66f6b683be38c4f8b9cf4bff5 (to debug the odd 
performance numbers)

1a0cf26323c80e2f a308c71bf1e6e19cc2e4ced3185 da5ba9980aa2211c1e2a89fc814 
8803d304738b52f66f6b683be38
---------------- --------------------------- --------------------------- 
---------------------------
          %stddev     %change         %stddev     %change 
%stddev     %change         %stddev
              \          |                \          |                \ 
          |                \
  3.406e+09           -95.6%   1.49e+08           -96.4%  1.213e+08 
       -96.5%  1.201e+08        stress-ng.vm-splice.ops
  1.135e+08           -95.6%    4965911           -96.4%    4041777 
       -96.5%    4002572        stress-ng.vm-splice.ops_per_sec


> 
> I'm not convinced that's a valid change in general, so this is just a
> "to debug the odd performance numbers" issue.
> 
> Also out of curiosity: is the performance profile limited to just the
> load, or is it a system profile (ie do you have "-a" on the perf
> record line or not).
> 

In our test , "-a" is enabled on the perf record line.

>                 Linus
> 

-- 
Zhengjun Xing