From: Marc Gonzalez <marc.w.gonzalez@free.fr>
To: MSM <linux-arm-msm@vger.kernel.org>, SCSI <linux-scsi@vger.kernel.org>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Avri Altman <avri.altman@wdc.com>,
Pedro Sousa <pedrom.sousa@synopsys.com>,
LKML <linux-kernel@vger.kernel.org>,
Lee Jones <lee.jones@linaro.org>
Subject: [PATCH v5 3/3] arm64: dts: qcom: msm8998: Add UFS nodes
Date: Mon, 25 Feb 2019 13:18:43 +0100 [thread overview]
Message-ID: <c5043595-badf-0d3a-4a86-4e609a8d74ce@free.fr> (raw)
In-Reply-To: <43768d77-80b7-9cdc-b6e0-08ec4a026c21@free.fr>
Add host controller and PHY DT nodes.
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
---
arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 19 +++++++
arch/arm64/boot/dts/qcom/msm8998.dtsi | 65 +++++++++++++++++++++++
2 files changed, 84 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index 19775cae1381..6329ba4777cc 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -270,6 +270,25 @@
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
};
+&ufshc {
+ vcc-supply = <&vreg_l20a_2p95>;
+ vccq-supply = <&vreg_l26a_1p2>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+ vcc-max-microamp = <750000>;
+ vccq-max-microamp = <560000>;
+ vccq2-max-microamp = <750000>;
+};
+
+&ufsphy {
+ vdda-phy-supply = <&vreg_l1a_0p875>;
+ vdda-pll-supply = <&vreg_l2a_1p2>;
+ vddp-ref-clk-supply = <&vreg_l26a_1p2>;
+ vdda-phy-max-microamp = <51400>;
+ vdda-pll-max-microamp = <14600>;
+ vddp-ref-clk-max-microamp = <100>;
+ vddp-ref-clk-always-on;
+};
+
&usb3 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 043ff2d2643c..23e2b2f360d1 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -983,6 +983,71 @@
redistributor-stride = <0x0 0x20000>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ ufshc: ufshc@1da4000 {
+ compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+ reg = <0x01da4000 0x2500>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&ufsphy_lanes>;
+ phy-names = "ufsphy";
+ lanes-per-direction = <2>;
+ power-domains = <&gcc UFS_GDSC>;
+
+ clock-names =
+ "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+ clocks =
+ <&gcc GCC_UFS_AXI_CLK>,
+ <&gcc GCC_AGGRE1_UFS_AXI_CLK>,
+ <&gcc GCC_UFS_AHB_CLK>,
+ <&gcc GCC_UFS_UNIPRO_CORE_CLK>,
+ <&rpmcc RPM_SMD_LN_BB_CLK1>,
+ <&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_RX_SYMBOL_1_CLK>;
+ freq-table-hz =
+ <50000000 200000000>,
+ <0 0>,
+ <0 0>,
+ <37500000 150000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+
+ resets = <&gcc GCC_UFS_BCR>;
+ reset-names = "rst";
+ };
+
+ ufsphy: phy@1da7000 {
+ compatible = "qcom,msm8998-qmp-ufs-phy";
+ reg = <0x01da7000 0x18c>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clock-names =
+ "ref",
+ "ref_aux";
+ clocks =
+ <&gcc GCC_UFS_CLKREF_CLK>,
+ <&gcc GCC_UFS_PHY_AUX_CLK>;
+
+ ufsphy_lanes: lanes@1da7400 {
+ reg = <0x01da7400 0x128>,
+ <0x01da7600 0x1fc>,
+ <0x01da7c00 0x1dc>,
+ <0x01da7800 0x128>,
+ <0x01da7a00 0x1fc>;
+ #phy-cells = <0>;
+ };
+ };
};
};
--
2.17.1
next prev parent reply other threads:[~2019-02-25 12:20 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-25 12:16 [PATCH v5 0/3] UFS on APQ8098/MSM8998 Marc Gonzalez
2019-02-25 12:17 ` [PATCH v5 1/3] dt-bindings: ufs: Add msm8998 compatible string Marc Gonzalez
2019-02-25 12:17 ` [PATCH v5 2/3] arm64: dts: qcom: msm8998: Allow UFSHC driver to set-load Marc Gonzalez
2019-02-25 12:18 ` Marc Gonzalez [this message]
2019-02-26 8:22 ` [PATCH v5 0/3] UFS on APQ8098/MSM8998t Lee Jones
2019-03-25 12:05 ` [PATCH v5 0/3] UFS on APQ8098/MSM8998 Marc Gonzalez
2019-03-27 6:16 ` Bjorn Andersson
2019-03-28 9:37 ` Sibi Sankar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c5043595-badf-0d3a-4a86-4e609a8d74ce@free.fr \
--to=marc.w.gonzalez@free.fr \
--cc=alim.akhtar@samsung.com \
--cc=andy.gross@linaro.org \
--cc=avri.altman@wdc.com \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=jhugo@codeaurora.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=pedrom.sousa@synopsys.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).