linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: sathyanarayanan.kuppuswamy@linux.intel.com
To: bhelgaas@google.com
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	ashok.raj@intel.com, keith.busch@intel.com,
	sathyanarayanan.kuppuswamy@linux.intel.com
Subject: [PATCH v2 1/5] PCI/ATS: Add PRI support for PCIe VF devices
Date: Mon,  6 May 2019 10:20:03 -0700	[thread overview]
Message-ID: <f773440c0eee2a8d4e5d6e2856717404ac836458.1557162861.git.sathyanarayanan.kuppuswamy@linux.intel.com> (raw)
In-Reply-To: <cover.1557162861.git.sathyanarayanan.kuppuswamy@linux.intel.com>

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

When IOMMU tries to enable PRI for VF device in
iommu_enable_dev_iotlb(), it always fails because PRI support for PCIe
VF device is currently broken in PCIE driver. Current implementation
expects the given PCIe device (PF & VF) to implement PRI capability
before enabling the PRI support. But this assumption is incorrect. As
per PCIe spec r4.0, sec 9.3.7.11, all VFs associated with PF can only
use the Page Request Interface (PRI) of the PF and not implement it.
Hence we need to create exception for handling the PRI support for PCIe
VF device.

Since PRI is shared between PF/VF devices, following rules should apply.

1. Enable PRI in VF only if its already enabled in PF.
2. When enabling/disabling PRI for VF, instead of configuring the
registers just increase/decrease the usage count (pri_ref_cnt) of PF.
3. Disable PRI in PF only if pr_ref_cnt is zero.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
---
 drivers/pci/ats.c   | 53 +++++++++++++++++++++++++++++++++++++++++++--
 include/linux/pci.h |  1 +
 2 files changed, 52 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
index 97c08146534a..5582e5d83a3f 100644
--- a/drivers/pci/ats.c
+++ b/drivers/pci/ats.c
@@ -181,12 +181,39 @@ int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
 	u16 control, status;
 	u32 max_requests;
 	int pos;
+	struct pci_dev *pf;
 
 	if (WARN_ON(pdev->pri_enabled))
 		return -EBUSY;
 
 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
-	if (!pos)
+
+	if (pdev->is_virtfn) {
+		/*
+		 * Per PCIe r4.0, sec 9.3.7.11, VF must not implement PRI
+		 * Capability.
+		 */
+		if (pos) {
+			dev_err(&pdev->dev, "VF must not implement PRI");
+			return -EINVAL;
+		}
+
+		pf = pci_physfn(pdev);
+
+		/* If VF config does not match with PF, return error */
+		if (!pf->pri_enabled)
+			return -EINVAL;
+
+		pdev->pri_reqs_alloc = pf->pri_reqs_alloc;
+		pdev->pri_enabled = 1;
+
+		/* Increment PF PRI refcount */
+		atomic_inc(&pf->pri_ref_cnt);
+
+		return 0;
+	}
+
+	if (pdev->is_physfn && !pos)
 		return -EINVAL;
 
 	pci_read_config_word(pdev, pos + PCI_PRI_STATUS, &status);
@@ -202,7 +229,6 @@ int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
 	pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
 
 	pdev->pri_enabled = 1;
-
 	return 0;
 }
 EXPORT_SYMBOL_GPL(pci_enable_pri);
@@ -217,10 +243,27 @@ void pci_disable_pri(struct pci_dev *pdev)
 {
 	u16 control;
 	int pos;
+	struct pci_dev *pf;
 
 	if (WARN_ON(!pdev->pri_enabled))
 		return;
 
+	/* All VFs should be disabled before disabling PF */
+	if (atomic_read(&pdev->pri_ref_cnt))
+		return;
+
+	if (pdev->is_virtfn) {
+		/* Since VF shares PRI with PF, use PF config. */
+		pf = pci_physfn(pdev);
+
+		/* Decrement PF PRI refcount */
+		atomic_dec(&pf->pri_ref_cnt);
+
+		pdev->pri_enabled = 0;
+
+		return;
+	}
+
 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
 	if (!pos)
 		return;
@@ -246,6 +289,9 @@ void pci_restore_pri_state(struct pci_dev *pdev)
 	if (!pdev->pri_enabled)
 		return;
 
+	if (pdev->is_virtfn)
+		return;
+
 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
 	if (!pos)
 		return;
@@ -270,6 +316,9 @@ int pci_reset_pri(struct pci_dev *pdev)
 	if (WARN_ON(pdev->pri_enabled))
 		return -EBUSY;
 
+	if (pdev->is_virtfn)
+		return 0;
+
 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
 	if (!pos)
 		return -EINVAL;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 77448215ef5b..699c79c99a39 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -450,6 +450,7 @@ struct pci_dev {
 #endif
 #ifdef CONFIG_PCI_PRI
 	u32		pri_reqs_alloc; /* Number of PRI requests allocated */
+	atomic_t	pri_ref_cnt;	/* Number of VFs with PRI enabled */
 #endif
 #ifdef CONFIG_PCI_PASID
 	u16		pasid_features;
-- 
2.20.1


  reply	other threads:[~2019-05-06 17:22 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-06 17:20 [PATCH v2 0/5] Fix PF/VF dependency issues sathyanarayanan.kuppuswamy
2019-05-06 17:20 ` sathyanarayanan.kuppuswamy [this message]
2019-05-29 22:57   ` [PATCH v2 1/5] PCI/ATS: Add PRI support for PCIe VF devices Bjorn Helgaas
2019-05-29 23:04     ` Raj, Ashok
2019-05-29 23:24       ` sathyanarayanan kuppuswamy
2019-05-30 13:20         ` Bjorn Helgaas
2019-05-30 13:17       ` Bjorn Helgaas
2019-05-30 17:20         ` Raj, Ashok
2019-05-30 17:39           ` sathyanarayanan kuppuswamy
2019-05-06 17:20 ` [PATCH v2 2/5] PCI/ATS: Add PASID " sathyanarayanan.kuppuswamy
2019-05-21 23:21   ` sathyanarayanan kuppuswamy
2019-05-29 23:03   ` Bjorn Helgaas
2019-05-06 17:20 ` [PATCH v2 3/5] PCI/ATS: Skip VF ATS initialization if PF does not implement it sathyanarayanan.kuppuswamy
2019-05-06 22:35   ` Elliott, Robert (Servers)
2019-05-30  2:53   ` Bjorn Helgaas
2019-05-06 17:20 ` [PATCH v2 4/5] PCI/ATS: Disable PF/VF ATS service independently sathyanarayanan.kuppuswamy
2019-05-06 17:20 ` [PATCH v2 5/5] PCI: Skip Enhanced Allocation (EA) initalization for VF device sathyanarayanan.kuppuswamy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f773440c0eee2a8d4e5d6e2856717404ac836458.1557162861.git.sathyanarayanan.kuppuswamy@linux.intel.com \
    --to=sathyanarayanan.kuppuswamy@linux.intel.com \
    --cc=ashok.raj@intel.com \
    --cc=bhelgaas@google.com \
    --cc=keith.busch@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).