mptcp.lists.linux.dev archive mirror
 help / color / mirror / Atom feed
From: Mat Martineau <mathew.j.martineau@linux.intel.com>
To: Paolo Abeni <pabeni@redhat.com>
Cc: mptcp@lists.linux.dev
Subject: Re: [PATCH v2 mptcp-net] mptcp: avoid race on msk state changes
Date: Thu, 17 Jun 2021 11:50:33 -0700 (PDT)	[thread overview]
Message-ID: <7dbf67d3-5ae1-6088-a9aa-c8d34767f496@linux.intel.com> (raw)
In-Reply-To: <a96e100aa429a9bb947a2b22cc16682649c93550.1623949487.git.pabeni@redhat.com>

On Thu, 17 Jun 2021, Paolo Abeni wrote:

> The msk socket state is currently updated in a few spots without
> owning the msk socket lock itself.
>
> Some of such operations are safe, as they happens before exposing
> the msk socket to user-space and can't race with other changes.
>
> A couple of them, at connect time, can actually race with close()
> or shutdown(), leaving breaking the socket state machine.
>
> This change addresses the issue moving such update under the msk
> socket lock with the usual:
>
> <acquire spinlock>
> <check sk lock onwers>
> <ev defer to release_cb>
>
> scheme.
>
> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/56
> Fixes: 8fd738049ac3 ("mptcp: fallback in case of simultaneous connect")
> Fixes: c3c123d16c0e ("net: mptcp: don't hang in mptcp_sendmsg() after TCP fallbac")
> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
> --
> v1 -> v2:
> - move the hooks inside release_cb() before other state-related actions

Thanks for the v2, looks ready to apply.

Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>


-Mat


> ---
> net/mptcp/protocol.c |  5 +++++
> net/mptcp/protocol.h |  2 ++
> net/mptcp/subflow.c  | 30 ++++++++++++++++++++++--------
> 3 files changed, 29 insertions(+), 8 deletions(-)
>
> diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
> index 05c8382aafef..ddce5b7bbefd 100644
> --- a/net/mptcp/protocol.c
> +++ b/net/mptcp/protocol.c
> @@ -2902,6 +2902,11 @@ static void mptcp_release_cb(struct sock *sk)
> 		spin_lock_bh(&sk->sk_lock.slock);
> 	}
>
> +	/* be sure to set the current sk state before tacking actions
> +	 * depending on sk_state
> +	 */
> +	if (test_and_clear_bit(MPTCP_CONNECTED, &mptcp_sk(sk)->flags))
> +		__mptcp_set_connected(sk);
> 	if (test_and_clear_bit(MPTCP_CLEAN_UNA, &mptcp_sk(sk)->flags))
> 		__mptcp_clean_una_wakeup(sk);
> 	if (test_and_clear_bit(MPTCP_ERROR_REPORT, &mptcp_sk(sk)->flags))
> diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h
> index 2480db50cbd2..515bb1e6acec 100644
> --- a/net/mptcp/protocol.h
> +++ b/net/mptcp/protocol.h
> @@ -112,6 +112,7 @@
> #define MPTCP_ERROR_REPORT	8
> #define MPTCP_RETRANSMIT	9
> #define MPTCP_WORK_SYNC_SETSOCKOPT 10
> +#define MPTCP_CONNECTED		11
>
> static inline bool before64(__u64 seq1, __u64 seq2)
> {
> @@ -600,6 +601,7 @@ void mptcp_get_options(const struct sock *sk,
> 		       struct mptcp_options_received *mp_opt);
>
> void mptcp_finish_connect(struct sock *sk);
> +void __mptcp_set_connected(struct sock *sk);
> static inline bool mptcp_is_fully_established(struct sock *sk)
> {
> 	return inet_sk_state_load(sk) == TCP_ESTABLISHED &&
> diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c
> index 6772802737e4..0b5d4a3eadcd 100644
> --- a/net/mptcp/subflow.c
> +++ b/net/mptcp/subflow.c
> @@ -373,6 +373,24 @@ static bool subflow_use_different_dport(struct mptcp_sock *msk, const struct soc
> 	return inet_sk(sk)->inet_dport != inet_sk((struct sock *)msk)->inet_dport;
> }
>
> +void __mptcp_set_connected(struct sock *sk)
> +{
> +	if (sk->sk_state == TCP_SYN_SENT) {
> +		inet_sk_state_store(sk, TCP_ESTABLISHED);
> +		sk->sk_state_change(sk);
> +	}
> +}
> +
> +static void mptcp_set_connected(struct sock *sk)
> +{
> +	mptcp_data_lock(sk);
> +	if (!sock_owned_by_user(sk))
> +		__mptcp_set_connected(sk);
> +	else
> +		set_bit(MPTCP_CONNECTED, &mptcp_sk(sk)->flags);
> +	mptcp_data_unlock(sk);
> +}
> +
> static void subflow_finish_connect(struct sock *sk, const struct sk_buff *skb)
> {
> 	struct mptcp_subflow_context *subflow = mptcp_subflow_ctx(sk);
> @@ -381,10 +399,6 @@ static void subflow_finish_connect(struct sock *sk, const struct sk_buff *skb)
>
> 	subflow->icsk_af_ops->sk_rx_dst_set(sk, skb);
>
> -	if (inet_sk_state_load(parent) == TCP_SYN_SENT) {
> -		inet_sk_state_store(parent, TCP_ESTABLISHED);
> -		parent->sk_state_change(parent);
> -	}
>
> 	/* be sure no special action on any packet other than syn-ack */
> 	if (subflow->conn_finished)
> @@ -417,6 +431,7 @@ static void subflow_finish_connect(struct sock *sk, const struct sk_buff *skb)
> 			 subflow->remote_key);
> 		MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_MPCAPABLEACTIVEACK);
> 		mptcp_finish_connect(sk);
> +		mptcp_set_connected(parent);
> 	} else if (subflow->request_join) {
> 		u8 hmac[SHA256_DIGEST_SIZE];
>
> @@ -457,6 +472,7 @@ static void subflow_finish_connect(struct sock *sk, const struct sk_buff *skb)
> 	} else if (mptcp_check_fallback(sk)) {
> fallback:
> 		mptcp_rcv_space_init(mptcp_sk(parent), sk);
> +		mptcp_set_connected(parent);
> 	}
> 	return;
>
> @@ -564,6 +580,7 @@ static void mptcp_sock_destruct(struct sock *sk)
>
> static void mptcp_force_close(struct sock *sk)
> {
> +	/* the msk is not yet exposed to user-space */
> 	inet_sk_state_store(sk, TCP_CLOSE);
> 	sk_common_release(sk);
> }
> @@ -1577,10 +1594,7 @@ static void subflow_state_change(struct sock *sk)
> 		mptcp_rcv_space_init(mptcp_sk(parent), sk);
> 		pr_fallback(mptcp_sk(parent));
> 		subflow->conn_finished = 1;
> -		if (inet_sk_state_load(parent) == TCP_SYN_SENT) {
> -			inet_sk_state_store(parent, TCP_ESTABLISHED);
> -			parent->sk_state_change(parent);
> -		}
> +		mptcp_set_connected(parent);
> 	}
>
> 	/* as recvmsg() does not acquire the subflow socket for ssk selection
> -- 
> 2.26.3
>
>
>

--
Mat Martineau
Intel

  reply	other threads:[~2021-06-17 18:50 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-17 17:05 [PATCH v2 mptcp-net] mptcp: avoid race on msk state changes Paolo Abeni
2021-06-17 18:50 ` Mat Martineau [this message]
2021-06-19  7:03 ` Matthieu Baerts

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7dbf67d3-5ae1-6088-a9aa-c8d34767f496@linux.intel.com \
    --to=mathew.j.martineau@linux.intel.com \
    --cc=mptcp@lists.linux.dev \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).