netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ilias Apalodimas <ilias.apalodimas@linaro.org>
To: jaswinder.singh@linaro.org
Cc: netdev@vger.kernel.org, ard.biesheuvel@linaro.org,
	masahisa.kojima@linaro.org, davem@davemloft.net,
	Ilias Apalodimas <ilias.apalodimas@linaro.org>
Subject: [net-next, PATCH 1/2] net: netsec: initialize tx ring on ndo_open
Date: Wed, 19 Jun 2019 10:57:13 +0300	[thread overview]
Message-ID: <1560931034-6810-1-git-send-email-ilias.apalodimas@linaro.org> (raw)

Since we changed the Tx ring handling and now depend not bit31 to figure
out the owner of the descriptor, we should initialize this every time
the device goes down-up instead of doing it once on driver init. If the
value is not correctly initialized the device won't have any available
descriptors

Fixes: 35e07d23473972b8876f98bcfc631ebcf779e870 ("net: socionext: remove mmio reads on Tx")

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
---
 drivers/net/ethernet/socionext/netsec.c | 32 ++++++++++++++-----------
 1 file changed, 18 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c
index cba5881b2746..a10ef700f16d 100644
--- a/drivers/net/ethernet/socionext/netsec.c
+++ b/drivers/net/ethernet/socionext/netsec.c
@@ -1029,7 +1029,6 @@ static void netsec_free_dring(struct netsec_priv *priv, int id)
 static int netsec_alloc_dring(struct netsec_priv *priv, enum ring_id id)
 {
 	struct netsec_desc_ring *dring = &priv->desc_ring[id];
-	int i;
 
 	dring->vaddr = dma_alloc_coherent(priv->dev, DESC_SZ * DESC_NUM,
 					  &dring->desc_dma, GFP_KERNEL);
@@ -1040,19 +1039,6 @@ static int netsec_alloc_dring(struct netsec_priv *priv, enum ring_id id)
 	if (!dring->desc)
 		goto err;
 
-	if (id == NETSEC_RING_TX) {
-		for (i = 0; i < DESC_NUM; i++) {
-			struct netsec_de *de;
-
-			de = dring->vaddr + (DESC_SZ * i);
-			/* de->attr is not going to be accessed by the NIC
-			 * until netsec_set_tx_de() is called.
-			 * No need for a dma_wmb() here
-			 */
-			de->attr = 1U << NETSEC_TX_SHIFT_OWN_FIELD;
-		}
-	}
-
 	return 0;
 err:
 	netsec_free_dring(priv, id);
@@ -1060,6 +1046,23 @@ static int netsec_alloc_dring(struct netsec_priv *priv, enum ring_id id)
 	return -ENOMEM;
 }
 
+static void netsec_setup_tx_dring(struct netsec_priv *priv)
+{
+	struct netsec_desc_ring *dring = &priv->desc_ring[NETSEC_RING_TX];
+	int i;
+
+	for (i = 0; i < DESC_NUM; i++) {
+		struct netsec_de *de;
+
+		de = dring->vaddr + (DESC_SZ * i);
+		/* de->attr is not going to be accessed by the NIC
+		 * until netsec_set_tx_de() is called.
+		 * No need for a dma_wmb() here
+		 */
+		de->attr = 1U << NETSEC_TX_SHIFT_OWN_FIELD;
+	}
+}
+
 static int netsec_setup_rx_dring(struct netsec_priv *priv)
 {
 	struct netsec_desc_ring *dring = &priv->desc_ring[NETSEC_RING_RX];
@@ -1361,6 +1364,7 @@ static int netsec_netdev_open(struct net_device *ndev)
 
 	pm_runtime_get_sync(priv->dev);
 
+	netsec_setup_tx_dring(priv);
 	ret = netsec_setup_rx_dring(priv);
 	if (ret) {
 		netif_err(priv, probe, priv->ndev,
-- 
2.20.1


             reply	other threads:[~2019-06-19  7:57 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-19  7:57 Ilias Apalodimas [this message]
2019-06-19  7:57 ` [net-next, PATCH 2/2] net: netsec: remove loops in napi Rx process Ilias Apalodimas
2019-06-19  9:41   ` Ard Biesheuvel
2019-06-19  9:40 ` [net-next, PATCH 1/2] net: netsec: initialize tx ring on ndo_open Ard Biesheuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1560931034-6810-1-git-send-email-ilias.apalodimas@linaro.org \
    --to=ilias.apalodimas@linaro.org \
    --cc=ard.biesheuvel@linaro.org \
    --cc=davem@davemloft.net \
    --cc=jaswinder.singh@linaro.org \
    --cc=masahisa.kojima@linaro.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).