From: Marco Hartmann <marco.hartmann@nxp.com>
To: "andrew@lunn.ch" <andrew@lunn.ch>,
"f.fainelli@gmail.com" <f.fainelli@gmail.com>,
"hkallweit1@gmail.com" <hkallweit1@gmail.com>,
"davem@davemloft.net" <davem@davemloft.net>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Marco Hartmann <marco.hartmann@nxp.com>,
Christian Herber <christian.herber@nxp.com>
Subject: [PATCH v2 net] Add genphy_c45_config_aneg() function to phy-c45.c
Date: Wed, 21 Aug 2019 11:00:46 +0000 [thread overview]
Message-ID: <1566385208-23523-1-git-send-email-marco.hartmann@nxp.com> (raw)
Commit 34786005eca3 ("net: phy: prevent PHYs w/o Clause 22 regs from calling
genphy_config_aneg") introduced a check that aborts phy_config_aneg()
if the phy is a C45 phy.
This causes phy_state_machine() to call phy_error() so that the phy
ends up in PHY_HALTED state.
Instead of returning -EOPNOTSUPP, call genphy_c45_config_aneg()
(analogous to the C22 case) so that the state machine can run
correctly.
genphy_c45_config_aneg() closely resembles mv3310_config_aneg()
in drivers/net/phy/marvell10g.c, excluding vendor specific
configurations for 1000BaseT.
Fixes: 22b56e827093 ("net: phy: replace genphy_10g_driver with genphy_c45_driver")
Signed-off-by: Marco Hartmann <marco.hartmann@nxp.com>
---
Changes in v2:
- corrected commit message
- reordered variables
---
---
drivers/net/phy/phy-c45.c | 26 ++++++++++++++++++++++++++
drivers/net/phy/phy.c | 2 +-
include/linux/phy.h | 1 +
3 files changed, 28 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index 58bb25e4af10..7935593debb1 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -523,6 +523,32 @@ int genphy_c45_read_status(struct phy_device *phydev)
}
EXPORT_SYMBOL_GPL(genphy_c45_read_status);
+/**
+ * genphy_c45_config_aneg - restart auto-negotiation or forced setup
+ * @phydev: target phy_device struct
+ *
+ * Description: If auto-negotiation is enabled, we configure the
+ * advertising, and then restart auto-negotiation. If it is not
+ * enabled, then we force a configuration.
+ */
+int genphy_c45_config_aneg(struct phy_device *phydev)
+{
+ bool changed = false;
+ int ret;
+
+ if (phydev->autoneg == AUTONEG_DISABLE)
+ return genphy_c45_pma_setup_forced(phydev);
+
+ ret = genphy_c45_an_config_aneg(phydev);
+ if (ret < 0)
+ return ret;
+ if (ret > 0)
+ changed = true;
+
+ return genphy_c45_check_and_restart_aneg(phydev, changed);
+}
+EXPORT_SYMBOL_GPL(genphy_c45_config_aneg);
+
/* The gen10g_* functions are the old Clause 45 stub */
int gen10g_config_aneg(struct phy_device *phydev)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index f3adea9ef400..74c4e15ebe52 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -507,7 +507,7 @@ static int phy_config_aneg(struct phy_device *phydev)
* allowed to call genphy_config_aneg()
*/
if (phydev->is_c45 && !(phydev->c45_ids.devices_in_package & BIT(0)))
- return -EOPNOTSUPP;
+ return genphy_c45_config_aneg(phydev);
return genphy_config_aneg(phydev);
}
diff --git a/include/linux/phy.h b/include/linux/phy.h
index d26779f1fb6b..a7ecbe0e55aa 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1117,6 +1117,7 @@ int genphy_c45_an_disable_aneg(struct phy_device *phydev);
int genphy_c45_read_mdix(struct phy_device *phydev);
int genphy_c45_pma_read_abilities(struct phy_device *phydev);
int genphy_c45_read_status(struct phy_device *phydev);
+int genphy_c45_config_aneg(struct phy_device *phydev);
/* The gen10g_* functions are the old Clause 45 stub */
int gen10g_config_aneg(struct phy_device *phydev);
--
2.7.4
next reply other threads:[~2019-08-21 11:01 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-21 11:00 Marco Hartmann [this message]
2019-08-21 15:37 ` [PATCH v2 net] Add genphy_c45_config_aneg() function to phy-c45.c Andrew Lunn
2019-08-21 16:55 ` Heiner Kallweit
2019-08-22 23:15 ` David Miller
2019-08-23 6:00 ` Heiner Kallweit
2019-08-27 22:01 ` David Miller
2019-08-27 23:10 ` Andrew Lunn
2019-08-28 3:20 ` David Miller
2019-08-28 3:22 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1566385208-23523-1-git-send-email-marco.hartmann@nxp.com \
--to=marco.hartmann@nxp.com \
--cc=andrew@lunn.ch \
--cc=christian.herber@nxp.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).