netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michael Chan <michael.chan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, vasundhara-v.volam@broadcom.com,
	ray.jui@broadcom.com
Subject: [PATCH net-next v2 00/22] bnxt_en: health and error recovery.
Date: Thu, 29 Aug 2019 23:54:43 -0400	[thread overview]
Message-ID: <1567137305-5853-1-git-send-email-michael.chan@broadcom.com> (raw)

This patchset implements adapter health and error recovery.  The status
is reported through several devlink reporters and the driver will
initiate and complete the recovery process using the devlink infrastructure.

v2: Added 4 patches at the beginning of the patchset to clean up error code
    handling related to firmware messages and to convert to use standard
    error codes.

    Removed the dropping of rtnl_lock in bnxt_close().

    Broke up the patches some more for better patch organization and
    future bisection.

Michael Chan (17):
  bnxt_en: Use a common function to print the same ethtool -f error
    message.
  bnxt_en: Remove the -1 error return code from bnxt_hwrm_do_send_msg().
  bnxt_en: Convert error code in firmware message response to standard
    code.
  bnxt_en: Simplify error checking in the SR-IOV message forwarding
    functions.
  bnxt_en: Suppress all error messages in hwrm_do_send_msg() in silent
    mode.
  bnxt_en: Prepare bnxt_init_one() to be called multiple times.
  bnxt_en: Refactor bnxt_sriov_enable().
  bnxt_en: Handle firmware reset status during IF_UP.
  bnxt_en: Discover firmware error recovery capabilities.
  bnxt_en: Pre-map the firmware health monitoring registers.
  bnxt_en: Enable health monitoring.
  bnxt_en: Add BNXT_STATE_IN_FW_RESET state.
  bnxt_en: Handle RESET_NOTIFY async event from firmware.
  bnxt_en: Handle firmware reset.
  bnxt_en: Do not send firmware messages if firmware is in error state.
  bnxt_en: Add RESET_FW state logic to bnxt_fw_reset_task().
  bnxt_en: Add bnxt_fw_exception() to handle fatal firmware errors.

Vasundhara Volam (5):
  bnxt_en: Register buffers for VFs before reserving resources.
  bnxt_en: Add new FW devlink_health_reporter
  bnxt_en: Add devlink health reset reporter.
  bnxt_en: Retain user settings on a VF after RESET_NOTIFY event.
  bnxt_en: Add FW fatal devlink_health_reporter.

 drivers/net/ethernet/broadcom/bnxt/bnxt.c         | 884 +++++++++++++++++++---
 drivers/net/ethernet/broadcom/bnxt/bnxt.h         |  91 +++
 drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c     |   6 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c | 197 ++++-
 drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h |   1 +
 drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c |  39 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c   | 181 +++--
 drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h   |   1 +
 drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c      |  17 -
 drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c     |   3 +
 10 files changed, 1172 insertions(+), 248 deletions(-)

-- 
2.5.1


             reply	other threads:[~2019-08-30  3:55 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-30  3:54 Michael Chan [this message]
2019-08-30  3:54 ` [PATCH net-next v2 01/22] bnxt_en: Use a common function to print the same ethtool -f error message Michael Chan
2019-08-30  3:54 ` [PATCH net-next v2 02/22] bnxt_en: Remove the -1 error return code from bnxt_hwrm_do_send_msg() Michael Chan
2019-08-30  3:54 ` [PATCH net-next v2 03/22] bnxt_en: Convert error code in firmware message response to standard code Michael Chan
2019-08-30  3:54 ` [PATCH net-next v2 04/22] bnxt_en: Simplify error checking in the SR-IOV message forwarding functions Michael Chan
2019-08-30  3:54 ` [PATCH net-next v2 05/22] bnxt_en: Suppress all error messages in hwrm_do_send_msg() in silent mode Michael Chan
2019-08-30  3:54 ` [PATCH net-next v2 06/22] bnxt_en: Prepare bnxt_init_one() to be called multiple times Michael Chan
2019-08-30  3:54 ` [PATCH net-next v2 07/22] bnxt_en: Refactor bnxt_sriov_enable() Michael Chan
2019-08-30  3:54 ` [PATCH net-next v2 08/22] bnxt_en: Register buffers for VFs before reserving resources Michael Chan
2019-08-30  3:54 ` [PATCH net-next v2 09/22] bnxt_en: Handle firmware reset status during IF_UP Michael Chan
2019-08-30  3:54 ` [PATCH net-next v2 10/22] bnxt_en: Discover firmware error recovery capabilities Michael Chan
2019-08-30  3:54 ` [PATCH net-next v2 11/22] bnxt_en: Pre-map the firmware health monitoring registers Michael Chan
2019-08-30  3:54 ` [PATCH net-next v2 12/22] bnxt_en: Enable health monitoring Michael Chan
2019-08-30  3:54 ` [PATCH net-next v2 13/22] bnxt_en: Add BNXT_STATE_IN_FW_RESET state Michael Chan
2019-08-30  3:54 ` [PATCH net-next v2 14/22] bnxt_en: Add new FW devlink_health_reporter Michael Chan
2019-10-07  9:56   ` Jiri Pirko
2019-10-09  4:55     ` Vasundhara Volam
2019-10-09  7:04       ` Jiri Pirko
2019-08-30  3:54 ` [PATCH net-next v2 15/22] bnxt_en: Handle RESET_NOTIFY async event from firmware Michael Chan
2019-08-30  3:54 ` [PATCH net-next v2 16/22] bnxt_en: Handle firmware reset Michael Chan
2019-08-30 17:56   ` kbuild test robot
2019-08-30  3:55 ` [PATCH net-next v2 17/22] bnxt_en: Add devlink health reset reporter Michael Chan
2019-08-30  3:55 ` [PATCH net-next v2 18/22] bnxt_en: Retain user settings on a VF after RESET_NOTIFY event Michael Chan
2019-08-30  3:55 ` [PATCH net-next v2 19/22] bnxt_en: Do not send firmware messages if firmware is in error state Michael Chan
2019-08-30  3:55 ` [PATCH net-next v2 20/22] bnxt_en: Add RESET_FW state logic to bnxt_fw_reset_task() Michael Chan
2019-08-30  3:55 ` [PATCH net-next v2 21/22] bnxt_en: Add bnxt_fw_exception() to handle fatal firmware errors Michael Chan
2019-08-30  3:55 ` [PATCH net-next v2 22/22] bnxt_en: Add FW fatal devlink_health_reporter Michael Chan
2019-08-30 21:02 ` [PATCH net-next v2 00/22] bnxt_en: health and error recovery David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1567137305-5853-1-git-send-email-michael.chan@broadcom.com \
    --to=michael.chan@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    --cc=ray.jui@broadcom.com \
    --cc=vasundhara-v.volam@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).