From: Kai Ye <yekai13@huawei.com>
To: <marcel@holtmann.org>, <johan.hedberg@gmail.com>,
<luiz.dentz@gmail.com>, <davem@davemloft.net>, <kuba@kernel.org>,
<netdev@vger.kernel.org>, <linux-bluetooth@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <yekai13@huawei.com>
Subject: [PATCH v2 05/12] net/Bluetooth/6lowpan - use the correct print format
Date: Fri, 21 May 2021 13:59:41 +0800 [thread overview]
Message-ID: <1621576788-48092-6-git-send-email-yekai13@huawei.com> (raw)
In-Reply-To: <1621576788-48092-1-git-send-email-yekai13@huawei.com>
According to Documentation/core-api/printk-formats.rst,
Use the correct print format. Printing an unsigned int value should use %u
instead of %d. Otherwise printk() might end up displaying negative numbers.
Signed-off-by: Kai Ye <yekai13@huawei.com>
---
net/bluetooth/6lowpan.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c
index cff4944..8de7876 100644
--- a/net/bluetooth/6lowpan.c
+++ b/net/bluetooth/6lowpan.c
@@ -195,7 +195,7 @@ static inline struct lowpan_peer *peer_lookup_dst(struct lowpan_btle_dev *dev,
rcu_read_lock();
list_for_each_entry_rcu(peer, &dev->peers, list) {
- BT_DBG("dst addr %pMR dst type %d ip %pI6c",
+ BT_DBG("dst addr %pMR dst type %u ip %pI6c",
&peer->chan->dst, peer->chan->dst_type,
&peer->peer_addr);
@@ -507,7 +507,7 @@ static int send_mcast_pkt(struct sk_buff *skb, struct net_device *netdev)
local_skb = skb_clone(skb, GFP_ATOMIC);
- BT_DBG("xmit %s to %pMR type %d IP %pI6c chan %p",
+ BT_DBG("xmit %s to %pMR type %u IP %pI6c chan %p",
netdev->name,
&pentry->chan->dst, pentry->chan->dst_type,
&pentry->peer_addr, pentry->chan);
@@ -550,7 +550,7 @@ static netdev_tx_t bt_xmit(struct sk_buff *skb, struct net_device *netdev)
if (err) {
if (lowpan_cb(skb)->chan) {
- BT_DBG("xmit %s to %pMR type %d IP %pI6c chan %p",
+ BT_DBG("xmit %s to %pMR type %u IP %pI6c chan %p",
netdev->name, &addr, addr_type,
&lowpan_cb(skb)->addr, lowpan_cb(skb)->chan);
err = send_pkt(lowpan_cb(skb)->chan, skb, netdev);
@@ -819,7 +819,7 @@ static void chan_close_cb(struct l2cap_chan *chan)
BT_DBG("dev %p removing %speer %p", dev,
last ? "last " : "1 ", peer);
- BT_DBG("chan %p orig refcnt %d", chan,
+ BT_DBG("chan %p orig refcnt %u", chan,
kref_read(&chan->kref));
l2cap_chan_put(chan);
@@ -943,7 +943,7 @@ static int bt_6lowpan_disconnect(struct l2cap_conn *conn, u8 dst_type)
{
struct lowpan_peer *peer;
- BT_DBG("conn %p dst type %d", conn, dst_type);
+ BT_DBG("conn %p dst type %u", conn, dst_type);
peer = lookup_peer(conn);
if (!peer)
@@ -975,7 +975,7 @@ static struct l2cap_chan *bt_6lowpan_listen(void)
atomic_set(&chan->nesting, L2CAP_NESTING_PARENT);
- BT_DBG("chan %p src type %d", chan, chan->src_type);
+ BT_DBG("chan %p src type %u", chan, chan->src_type);
err = l2cap_add_psm(chan, addr, cpu_to_le16(L2CAP_PSM_IPSP));
if (err) {
@@ -1016,7 +1016,7 @@ static int get_l2cap_conn(char *buf, bdaddr_t *addr, u8 *addr_type,
*conn = (struct l2cap_conn *)hcon->l2cap_data;
- BT_DBG("conn %p dst %pMR type %d", *conn, &hcon->dst, hcon->dst_type);
+ BT_DBG("conn %p dst %pMR type %u", *conn, &hcon->dst, hcon->dst_type);
return 0;
}
@@ -1158,7 +1158,7 @@ static ssize_t lowpan_control_write(struct file *fp,
return -EALREADY;
}
- BT_DBG("conn %p dst %pMR type %d user %d", conn,
+ BT_DBG("conn %p dst %pMR type %d user %u", conn,
&conn->hcon->dst, conn->hcon->dst_type,
addr_type);
}
--
2.8.1
next prev parent reply other threads:[~2021-05-21 6:03 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-21 5:59 [PATCH v2 00/12] net/Bluetooth: correct the use of print format Kai Ye
2021-05-21 5:59 ` [PATCH v2 01/12] net/Bluetooth/bnep - use the correct " Kai Ye
2021-05-21 5:59 ` [PATCH v2 02/12] net/Bluetooth/cmtp " Kai Ye
2021-05-21 5:59 ` [PATCH v2 03/12] net/Bluetooth/hidp " Kai Ye
2021-05-21 5:59 ` [PATCH v2 04/12] net/Bluetooth/rfcomm " Kai Ye
2021-05-21 5:59 ` Kai Ye [this message]
2021-05-21 5:59 ` [PATCH v2 06/12] net/Bluetooth/a2mp " Kai Ye
2021-05-21 5:59 ` [PATCH v2 07/12] net/Bluetooth/amp " Kai Ye
2021-05-21 5:59 ` [PATCH v2 08/12] net/Bluetooth/hci " Kai Ye
2021-05-21 5:59 ` [PATCH v2 09/12] net/Bluetooth/mgmt " Kai Ye
2021-05-21 5:59 ` [PATCH v2 10/12] net/Bluetooth/msft " Kai Ye
2021-05-21 5:59 ` [PATCH v2 11/12] net/Bluetooth/sco " Kai Ye
2021-05-21 5:59 ` [PATCH v2 12/12] net/Bluetooth/smp " Kai Ye
2021-06-02 20:18 ` [PATCH v2 00/12] net/Bluetooth: correct the use of " Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1621576788-48092-6-git-send-email-yekai13@huawei.com \
--to=yekai13@huawei.com \
--cc=davem@davemloft.net \
--cc=johan.hedberg@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=marcel@holtmann.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).