From: Ido Schimmel <idosch@idosch.org>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, richardcochran@gmail.com, jiri@mellanox.com,
shalomt@mellanox.com, petrm@mellanox.com, mlxsw@mellanox.com,
Ido Schimmel <idosch@mellanox.com>
Subject: [PATCH net-next 9/9] selftests: ptp: Add Physical Hardware Clock test
Date: Mon, 3 Jun 2019 15:12:44 +0300 [thread overview]
Message-ID: <20190603121244.3398-10-idosch@idosch.org> (raw)
In-Reply-To: <20190603121244.3398-1-idosch@idosch.org>
From: Shalom Toledo <shalomt@mellanox.com>
Test the PTP Physical Hardware Clock functionality using the "phc_ctl" (a
part of "linuxptp").
The test contains three sub-tests:
* "settime" test
* "adjtime" test
* "adjfreq" test
"settime" test:
* set the PHC time to 0 seconds.
* wait for 120.5 seconds.
* check if PHC time equal to 120.XX seconds.
"adjtime" test:
* set the PHC time to 0 seconds.
* adjust the time by 10 seconds.
* check if PHC time equal to 10.XX seconds.
"adjfreq" test:
* adjust the PHC frequency to be 1% faster.
* set the PHC time to 0 seconds.
* wait for 100.5 seconds.
* check if PHC time equal to 101.XX seconds.
Usage:
$ ./phc.sh /dev/ptp<X>
It is possible to run a subset of the tests, for example:
* To run only the "settime" test:
$ TESTS="settime" ./phc.sh /dev/ptp<X>
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
---
tools/testing/selftests/ptp/phc.sh | 166 +++++++++++++++++++++++++++++
1 file changed, 166 insertions(+)
create mode 100755 tools/testing/selftests/ptp/phc.sh
diff --git a/tools/testing/selftests/ptp/phc.sh b/tools/testing/selftests/ptp/phc.sh
new file mode 100755
index 000000000000..ac6e5a6e1d3a
--- /dev/null
+++ b/tools/testing/selftests/ptp/phc.sh
@@ -0,0 +1,166 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+ settime
+ adjtime
+ adjfreq
+"
+DEV=$1
+
+##############################################################################
+# Sanity checks
+
+if [[ "$(id -u)" -ne 0 ]]; then
+ echo "SKIP: need root privileges"
+ exit 0
+fi
+
+if [[ "$DEV" == "" ]]; then
+ echo "SKIP: PTP device not provided"
+ exit 0
+fi
+
+require_command()
+{
+ local cmd=$1; shift
+
+ if [[ ! -x "$(command -v "$cmd")" ]]; then
+ echo "SKIP: $cmd not installed"
+ exit 1
+ fi
+}
+
+phc_sanity()
+{
+ phc_ctl $DEV get &> /dev/null
+
+ if [ $? != 0 ]; then
+ echo "SKIP: unknown clock $DEV: No such device"
+ exit 1
+ fi
+}
+
+require_command phc_ctl
+phc_sanity
+
+##############################################################################
+# Helpers
+
+# Exit status to return at the end. Set in case one of the tests fails.
+EXIT_STATUS=0
+# Per-test return value. Clear at the beginning of each test.
+RET=0
+
+check_err()
+{
+ local err=$1
+
+ if [[ $RET -eq 0 && $err -ne 0 ]]; then
+ RET=$err
+ fi
+}
+
+log_test()
+{
+ local test_name=$1
+
+ if [[ $RET -ne 0 ]]; then
+ EXIT_STATUS=1
+ printf "TEST: %-60s [FAIL]\n" "$test_name"
+ return 1
+ fi
+
+ printf "TEST: %-60s [ OK ]\n" "$test_name"
+ return 0
+}
+
+tests_run()
+{
+ local current_test
+
+ for current_test in ${TESTS:-$ALL_TESTS}; do
+ $current_test
+ done
+}
+
+##############################################################################
+# Tests
+
+settime_do()
+{
+ local res
+
+ res=$(phc_ctl $DEV set 0 wait 120.5 get 2> /dev/null \
+ | awk '/clock time is/{print $5}' \
+ | awk -F. '{print $1}')
+
+ (( res == 120 ))
+}
+
+adjtime_do()
+{
+ local res
+
+ res=$(phc_ctl $DEV set 0 adj 10 get 2> /dev/null \
+ | awk '/clock time is/{print $5}' \
+ | awk -F. '{print $1}')
+
+ (( res == 10 ))
+}
+
+adjfreq_do()
+{
+ local res
+
+ # Set the clock to be 1% faster
+ res=$(phc_ctl $DEV freq 10000000 set 0 wait 100.5 get 2> /dev/null \
+ | awk '/clock time is/{print $5}' \
+ | awk -F. '{print $1}')
+
+ (( res == 101 ))
+}
+
+##############################################################################
+
+cleanup()
+{
+ phc_ctl $DEV freq 0.0 &> /dev/null
+ phc_ctl $DEV set &> /dev/null
+}
+
+settime()
+{
+ RET=0
+
+ settime_do
+ check_err $?
+ log_test "settime"
+ cleanup
+}
+
+adjtime()
+{
+ RET=0
+
+ adjtime_do
+ check_err $?
+ log_test "adjtime"
+ cleanup
+}
+
+adjfreq()
+{
+ RET=0
+
+ adjfreq_do
+ check_err $?
+ log_test "adjfreq"
+ cleanup
+}
+
+trap cleanup EXIT
+
+tests_run
+
+exit $EXIT_STATUS
--
2.20.1
next prev parent reply other threads:[~2019-06-03 12:14 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-03 12:12 [PATCH net-next 0/9] mlxsw: Add support for physical hardware clock Ido Schimmel
2019-06-03 12:12 ` [PATCH net-next 1/9] mlxsw: cmd: Free running clock PCI BAR and offsets via query firmware Ido Schimmel
2019-06-03 12:12 ` [PATCH net-next 2/9] mlxsw: core: Add a new interface for reading the hardware free running clock Ido Schimmel
2019-06-03 12:12 ` [PATCH net-next 3/9] mlxsw: pci: Query free running clock PCI BAR and offsets Ido Schimmel
2019-06-03 12:12 ` [PATCH net-next 4/9] mlxsw: reg: Add Management UTC Register Ido Schimmel
2019-06-04 14:17 ` Richard Cochran
2019-06-05 11:30 ` Shalom Toledo
2019-06-05 17:23 ` Richard Cochran
2019-06-05 18:55 ` Shalom Toledo
2019-06-06 2:37 ` Richard Cochran
2019-06-06 9:11 ` Shalom Toledo
2019-06-06 10:12 ` Petr Machata
2019-06-03 12:12 ` [PATCH net-next 5/9] mlxsw: reg: Add Management Pulse Per Second Register Ido Schimmel
2019-06-03 12:12 ` [PATCH net-next 6/9] ptp: ptp_clock: Publish scaled_ppm_to_ppb Ido Schimmel
2019-06-04 14:21 ` Richard Cochran
2019-06-05 11:46 ` Shalom Toledo
2019-06-03 12:12 ` [PATCH net-next 7/9] mlxsw: spectrum_ptp: Add implementation for physical hardware clock operations Ido Schimmel
2019-06-04 14:28 ` Richard Cochran
2019-06-05 6:30 ` Jiri Pirko
2019-06-05 17:24 ` Richard Cochran
2019-06-05 11:44 ` Shalom Toledo
2019-06-05 17:40 ` Richard Cochran
2019-06-05 19:28 ` Shalom Toledo
2019-06-06 2:43 ` Richard Cochran
2019-06-06 8:50 ` Shalom Toledo
2019-06-06 8:57 ` Shalom Toledo
2019-06-04 17:03 ` Richard Cochran
2019-06-05 9:00 ` Petr Machata
2019-06-05 17:31 ` Richard Cochran
2019-06-06 10:21 ` Petr Machata
2019-06-03 12:12 ` [PATCH net-next 8/9] mlxsw: spectrum: PTP physical hardware clock initialization Ido Schimmel
2019-06-03 12:12 ` Ido Schimmel [this message]
2019-06-04 17:05 ` [PATCH net-next 9/9] selftests: ptp: Add Physical Hardware Clock test Richard Cochran
2019-06-07 11:15 ` Vladimir Oltean
2019-06-08 10:44 ` Vladimir Oltean
2019-06-11 13:54 ` Shalom Toledo
2019-06-03 17:35 ` [PATCH net-next 0/9] mlxsw: Add support for physical hardware clock David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190603121244.3398-10-idosch@idosch.org \
--to=idosch@idosch.org \
--cc=davem@davemloft.net \
--cc=idosch@mellanox.com \
--cc=jiri@mellanox.com \
--cc=mlxsw@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=petrm@mellanox.com \
--cc=richardcochran@gmail.com \
--cc=shalomt@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).