[PATCH net-next 2/7] mlxsw: reg: Add new trap actions

[Ido Schimmel <idosch@idosch.org>]

From: Ido Schimmel <idosch@mellanox.com>

Subsequent patches will add discard traps support in mlxsw. The driver
cannot configure such traps with a normal trap action, but needs to use
exception trap action, which also increments an error counter.

On the other hand, when these traps are initialized or set to drop
action, they should use the default drop action set by the firmware.
This guarantees that when the feature is disabled we get the exact same
behavior as before the feature was introduced.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index ead36702549a..59e296562b5a 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -5559,6 +5559,8 @@ enum mlxsw_reg_hpkt_action {
 	MLXSW_REG_HPKT_ACTION_DISCARD,
 	MLXSW_REG_HPKT_ACTION_SOFT_DISCARD,
 	MLXSW_REG_HPKT_ACTION_TRAP_AND_SOFT_DISCARD,
+	MLXSW_REG_HPKT_ACTION_TRAP_EXCEPTION_TO_CPU,
+	MLXSW_REG_HPKT_ACTION_SET_FW_DEFAULT = 15,
 };
 
 /* reg_hpkt_action
@@ -5569,6 +5571,8 @@ enum mlxsw_reg_hpkt_action {
  * 3 - Discard.
  * 4 - Soft discard (allow other traps to act on the packet).
  * 5 - Trap and soft discard (allow other traps to overwrite this trap).
+ * 6 - Trap to CPU (CPU receives sole copy) and count it as error.
+ * 15 - Restore the firmware's default action.
  * Access: RW
  *
  * Note: Must be set to 0 (forward) for event trap IDs, as they are already
-- 
2.21.0