[PATCH v2 net-next 06/10] net: dsa: b53: Add MTU configuration support

From: Vladimir Oltean <olteanv@gmail.com>
To: andrew@lunn.ch, f.fainelli@gmail.com, vivien.didelot@gmail.com,
	davem@davemloft.net, jakub.kicinski@netronome.com
Cc: murali.policharla@broadcom.com, stephen@networkplumber.org,
	jiri@resnulli.us, idosch@idosch.org, kuba@kernel.org,
	nikolay@cumulusnetworks.com, netdev@vger.kernel.org
Subject: [PATCH v2 net-next 06/10] net: dsa: b53: Add MTU configuration support
Date: Wed, 25 Mar 2020 17:22:05 +0200	[thread overview]
Message-ID: <20200325152209.3428-7-olteanv@gmail.com> (raw)
In-Reply-To: <20200325152209.3428-1-olteanv@gmail.com>

From: Murali Krishna Policharla <murali.policharla@broadcom.com>

Add b53_change_mtu API to configure mtu settings in B53 switch. Enable
jumbo frame support if configured mtu size is for jumbo frame. Also
configure BCM583XX devices to send and receive jumbo frames when ports
are configured with 10/100 Mbps speed.

Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/net/dsa/b53/b53_common.c | 35 ++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index ceafce446317..e32e05803800 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -644,6 +644,7 @@ EXPORT_SYMBOL(b53_brcm_hdr_setup);
 
 static void b53_enable_cpu_port(struct b53_device *dev, int port)
 {
+	u32 port_mask;
 	u8 port_ctrl;
 
 	/* BCM5325 CPU port is at 8 */
@@ -658,6 +659,14 @@ static void b53_enable_cpu_port(struct b53_device *dev, int port)
 	b53_brcm_hdr_setup(dev->ds, port);
 
 	b53_br_egress_floods(dev->ds, port, true, true);
+
+	b53_read32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, &port_mask);
+
+	if (dev->chip_id == BCM583XX_DEVICE_ID)
+		port_mask |= JPM_10_100_JUMBO_EN;
+
+	port_mask |= BIT(port);
+	b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask);
 }
 
 static void b53_enable_mib(struct b53_device *dev)
@@ -2065,6 +2074,30 @@ int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
 }
 EXPORT_SYMBOL(b53_set_mac_eee);
 
+static int b53_change_mtu(struct dsa_switch *ds, int port, int mtu)
+{
+	struct b53_device *dev = ds->priv;
+	u32 port_mask;
+
+	if (dev->chip_id == BCM58XX_DEVICE_ID ||
+	    is5325(dev) || is5365(dev))
+		return -EOPNOTSUPP;
+
+	b53_read32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, &port_mask);
+
+	if (mtu >= JMS_MIN_SIZE)
+		port_mask |= BIT(port);
+	else
+		port_mask &= ~BIT(port);
+
+	return b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask);
+}
+
+static int b53_get_max_mtu(struct dsa_switch *ds, int port)
+{
+	return JMS_MAX_SIZE;
+}
+
 static const struct dsa_switch_ops b53_switch_ops = {
 	.get_tag_protocol	= b53_get_tag_protocol,
 	.setup			= b53_setup,
@@ -2102,6 +2135,8 @@ static const struct dsa_switch_ops b53_switch_ops = {
 	.port_mdb_prepare	= b53_mdb_prepare,
 	.port_mdb_add		= b53_mdb_add,
 	.port_mdb_del		= b53_mdb_del,
+	.port_max_mtu		= b53_get_max_mtu,
+	.port_change_mtu	= b53_change_mtu,
 };
 
 struct b53_chip_data {
-- 
2.17.1

