netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vladimir Oltean <vladimir.oltean@nxp.com>
To: Richard Cochran <richardcochran@gmail.com>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Andrew Lunn <andrew@lunn.ch>, David Miller <davem@davemloft.net>,
	Grygorii Strashko <grygorii.strashko@ti.com>,
	Jakub Kicinski <kuba@kernel.org>,
	Joakim Zhang <qiangqing.zhang@nxp.com>,
	Kurt Kanzenbach <kurt@linutronix.de>,
	Miroslav Lichvar <mlichvar@redhat.com>,
	Russell King <linux@arm.linux.org.uk>,
	Hangbin Liu <liuhangbin@gmail.com>
Subject: Re: [PATCH RFC V1 net-next 1/4] net: ethtool: Refactor identical get_ts_info implementations.
Date: Thu, 20 Jan 2022 16:13:29 +0000	[thread overview]
Message-ID: <20220120161329.fbniou5kzn2x4rp7@skbuf> (raw)
In-Reply-To: <20220103232555.19791-2-richardcochran@gmail.com>

On Mon, Jan 03, 2022 at 03:25:52PM -0800, Richard Cochran wrote:
> Both the vlan and the bonding drivers call their "real" device driver
> in order to report the time stamping capabilities.  Provide a core
> ethtool helper function to avoid copy/paste in the stack.
> 
> Signed-off-by: Richard Cochran <richardcochran@gmail.com>
> ---

Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>

>  drivers/net/bonding/bond_main.c | 14 ++------------
>  include/linux/ethtool.h         |  8 ++++++++
>  net/8021q/vlan_dev.c            | 15 +--------------
>  net/ethtool/common.c            |  6 ++++++
>  4 files changed, 17 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
> index b60e22f6394a..f28b88b67b9e 100644
> --- a/drivers/net/bonding/bond_main.c
> +++ b/drivers/net/bonding/bond_main.c
> @@ -5353,23 +5353,13 @@ static int bond_ethtool_get_ts_info(struct net_device *bond_dev,
>  				    struct ethtool_ts_info *info)
>  {
>  	struct bonding *bond = netdev_priv(bond_dev);
> -	const struct ethtool_ops *ops;
>  	struct net_device *real_dev;
> -	struct phy_device *phydev;
>  
>  	rcu_read_lock();
>  	real_dev = bond_option_active_slave_get_rcu(bond);
>  	rcu_read_unlock();

Side note: I'm a bit confused about this rcu_read_lock() ->
rcu_dereference_protected() -> rcu_read_unlock() pattern, and use of the
real_dev outside the RCU critical section. Isn't ->get_ts_info()
protected by the rtnl_mutex? Shouldn't there be a
bond_option_active_slave_get() which uses rtnl_dereference()?
I see the code has been recently added by Hangbin Liu.

> -	if (real_dev) {
> -		ops = real_dev->ethtool_ops;
> -		phydev = real_dev->phydev;
> -
> -		if (phy_has_tsinfo(phydev)) {
> -			return phy_ts_info(phydev, info);
> -		} else if (ops->get_ts_info) {
> -			return ops->get_ts_info(real_dev, info);
> -		}
> -	}
> +	if (real_dev)
> +		return ethtool_get_ts_info_by_layer(real_dev, info);
>  
>  	info->so_timestamping = SOF_TIMESTAMPING_RX_SOFTWARE |
>  				SOF_TIMESTAMPING_SOFTWARE;
> diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
> index a26f37a27167..1d72344493bb 100644
> --- a/include/linux/ethtool.h
> +++ b/include/linux/ethtool.h
> @@ -824,6 +824,14 @@ ethtool_params_from_link_mode(struct ethtool_link_ksettings *link_ksettings,
>   */
>  int ethtool_get_phc_vclocks(struct net_device *dev, int **vclock_index);
>  
> +/**
> + * ethtool_get_ts_info_by_layer - Obtains time stamping capabilities from the MAC or PHY layer.
> + * @dev: pointer to net_device structure
> + * @info: buffer to hold the result
> + * Returns zero on sauces, non-zero otherwise.
> + */
> +int ethtool_get_ts_info_by_layer(struct net_device *dev, struct ethtool_ts_info *info);
> +
>  /**
>   * ethtool_sprintf - Write formatted string to ethtool string data
>   * @data: Pointer to start of string to update
> diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
> index 26d031a43cc1..c645d7c46d78 100644
> --- a/net/8021q/vlan_dev.c
> +++ b/net/8021q/vlan_dev.c
> @@ -679,20 +679,7 @@ static int vlan_ethtool_get_ts_info(struct net_device *dev,
>  				    struct ethtool_ts_info *info)
>  {
>  	const struct vlan_dev_priv *vlan = vlan_dev_priv(dev);
> -	const struct ethtool_ops *ops = vlan->real_dev->ethtool_ops;
> -	struct phy_device *phydev = vlan->real_dev->phydev;
> -
> -	if (phy_has_tsinfo(phydev)) {
> -		return phy_ts_info(phydev, info);
> -	} else if (ops->get_ts_info) {
> -		return ops->get_ts_info(vlan->real_dev, info);
> -	} else {
> -		info->so_timestamping = SOF_TIMESTAMPING_RX_SOFTWARE |
> -			SOF_TIMESTAMPING_SOFTWARE;
> -		info->phc_index = -1;
> -	}
> -
> -	return 0;
> +	return ethtool_get_ts_info_by_layer(vlan->real_dev, info);
>  }
>  
>  static void vlan_dev_get_stats64(struct net_device *dev,
> diff --git a/net/ethtool/common.c b/net/ethtool/common.c
> index 0c5210015911..651d18eef589 100644
> --- a/net/ethtool/common.c
> +++ b/net/ethtool/common.c
> @@ -569,6 +569,12 @@ int ethtool_get_phc_vclocks(struct net_device *dev, int **vclock_index)
>  }
>  EXPORT_SYMBOL(ethtool_get_phc_vclocks);
>  
> +int ethtool_get_ts_info_by_layer(struct net_device *dev, struct ethtool_ts_info *info)
> +{
> +	return __ethtool_get_ts_info(dev, info);
> +}
> +EXPORT_SYMBOL(ethtool_get_ts_info_by_layer);

I would probably replace all __ethtool_get_ts_info() function name
occurrences with ethtool_get_ts_info_by_layer() (since it isn't a bad
name) to make it absolutely clear that it's recursive for VLAN and bond
interfaces. But maybe that's just me.

> +
>  const struct ethtool_phy_ops *ethtool_phy_ops;
>  
>  void ethtool_set_ethtool_phy_ops(const struct ethtool_phy_ops *ops)
> -- 
> 2.20.1
>

  reply	other threads:[~2022-01-20 16:13 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-03 23:25 [PATCH RFC V1 net-next 1/4] net: ethtool: Refactor identical get_ts_info implementations Richard Cochran
2022-01-20 16:13 ` Vladimir Oltean [this message]
2022-01-21  3:56   ` Hangbin Liu
2022-01-21  5:20     ` Jay Vosburgh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220120161329.fbniou5kzn2x4rp7@skbuf \
    --to=vladimir.oltean@nxp.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=grygorii.strashko@ti.com \
    --cc=kuba@kernel.org \
    --cc=kurt@linutronix.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=liuhangbin@gmail.com \
    --cc=mlichvar@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=qiangqing.zhang@nxp.com \
    --cc=richardcochran@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).