[PATCH net-next v4 0/7] add ti dp83td510 support

[Oleksij Rempel <o.rempel@pengutronix.de>]

changes v4:
- dp83td510: remove unused variables
- s/base1/baset1
- s/genphy_c45_baset1_read_master_slave/genphy_c45_pma_baset1_read_master_slave

changes v3:
- export reusable code snippets and make use of it in the dp83td510
  driver

changes v2:
- rewrite the driver reduce usage of common code and to reduce amount of
  quirks.
- add genphy_c45_baset1_an_config_aneg fix

Oleksij Rempel (7):
  net: phy: genphy_c45_baset1_an_config_aneg: do no set unknown
    configuration
  net: phy: introduce genphy_c45_pma_baset1_setup_master_slave()
  net: phy: genphy_c45_pma_baset1_setup_master_slave: do no set unknown
    configuration
  net: phy: introduce genphy_c45_pma_baset1_read_master_slave()
  net: phy: genphy_c45_pma_baset1_read_master_slave: read actual
    configuration
  net: phy: export genphy_c45_baset1_read_status()
  net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY

 drivers/net/phy/Kconfig     |   6 ++
 drivers/net/phy/Makefile    |   1 +
 drivers/net/phy/dp83td510.c | 209 ++++++++++++++++++++++++++++++++++++
 drivers/net/phy/phy-c45.c   |  94 +++++++++++-----
 include/linux/phy.h         |   3 +
 5 files changed, 286 insertions(+), 27 deletions(-)
 create mode 100644 drivers/net/phy/dp83td510.c

-- 
2.30.2