[PATCH 05/12] dt-bindings: media: convert meson-ir.txt to dt-schema

[Neil Armstrong <neil.armstrong@linaro.org>]

Convert the Amlogic Meson IR remote control receiver bindings to
dt-schema.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 .../bindings/media/amlogic,meson6-ir.yaml          | 43 ++++++++++++++++++++++
 .../devicetree/bindings/media/meson-ir.txt         | 20 ----------
 2 files changed, 43 insertions(+), 20 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml b/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml
new file mode 100644
index 000000000000..f8bc445b1f25
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/amlogic,meson6-ir.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson IR remote control receiver
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: rc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson6-ir
+      - amlogic,meson8b-ir
+      - amlogic,meson-gxbb-ir
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    ir-receiver@c8100480 {
+        compatible = "amlogic,meson6-ir";
+        reg = <0xc8100480 0x20>;
+        interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
+    };
diff --git a/Documentation/devicetree/bindings/media/meson-ir.txt b/Documentation/devicetree/bindings/media/meson-ir.txt
deleted file mode 100644
index efd9d29a8f10..000000000000
--- a/Documentation/devicetree/bindings/media/meson-ir.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Amlogic Meson IR remote control receiver
-
-Required properties:
- - compatible	: depending on the platform this should be one of:
-		  - "amlogic,meson6-ir"
-		  - "amlogic,meson8b-ir"
-		  - "amlogic,meson-gxbb-ir"
- - reg		: physical base address and length of the device registers
- - interrupts	: a single specifier for the interrupt from the device
-
-Optional properties:
- - linux,rc-map-name:	see rc.txt file in the same directory.
-
-Example:
-
-	ir-receiver@c8100480 {
-		compatible= "amlogic,meson6-ir";
-		reg = <0xc8100480 0x20>;
-		interrupts = <0 15 1>;
-	};

-- 
b4 0.10.1