netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Srujana Challa <schalla@marvell.com>
To: <netdev@vger.kernel.org>
Cc: <davem@davemloft.net>, <kuba@kernel.org>, <edumazet@google.com>,
	<jerinj@marvell.com>, <sgoutham@marvell.com>,
	<lcherian@marvell.com>, <gakula@marvell.com>,
	<sbhatta@marvell.com>, <hkelam@marvell.com>
Subject: [PATCH net-next,2/9] octeontx2-af: recover CPT engine when it gets fault
Date: Mon, 9 Jan 2023 13:05:56 +0530	[thread overview]
Message-ID: <20230109073603.861043-3-schalla@marvell.com> (raw)
In-Reply-To: <20230109073603.861043-1-schalla@marvell.com>

When CPT engine has uncorrectable errors, it will get halted and
must be disabled and re-enabled. This patch adds code for the same.

Signed-off-by: Srujana Challa <schalla@marvell.com>
---
 .../ethernet/marvell/octeontx2/af/rvu_cpt.c   | 107 +++++++++++++-----
 1 file changed, 79 insertions(+), 28 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c
index 33979adb7d02..1ed16ce515bb 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c
@@ -37,34 +37,60 @@
 	(_rsp)->free_sts_##etype = free_sts;                        \
 })
 
-static irqreturn_t rvu_cpt_af_flt_intr_handler(int irq, void *ptr)
+static irqreturn_t cpt_af_flt_intr_handler(int vec, void *ptr)
 {
 	struct rvu_block *block = ptr;
 	struct rvu *rvu = block->rvu;
 	int blkaddr = block->addr;
-	u64 reg0, reg1, reg2;
-
-	reg0 = rvu_read64(rvu, blkaddr, CPT_AF_FLTX_INT(0));
-	reg1 = rvu_read64(rvu, blkaddr, CPT_AF_FLTX_INT(1));
-	if (!is_rvu_otx2(rvu)) {
-		reg2 = rvu_read64(rvu, blkaddr, CPT_AF_FLTX_INT(2));
-		dev_err_ratelimited(rvu->dev,
-				    "Received CPTAF FLT irq : 0x%llx, 0x%llx, 0x%llx",
-				     reg0, reg1, reg2);
-	} else {
-		dev_err_ratelimited(rvu->dev,
-				    "Received CPTAF FLT irq : 0x%llx, 0x%llx",
-				     reg0, reg1);
+	u64 reg, val;
+	int i, eng;
+	u8 grp;
+
+	reg = rvu_read64(rvu, blkaddr, CPT_AF_FLTX_INT(vec));
+	dev_err_ratelimited(rvu->dev, "Received CPTAF FLT%d irq : 0x%llx", vec, reg);
+
+	i = -1;
+	while ((i = find_next_bit((unsigned long *)&reg, 64, i + 1)) < 64) {
+		switch (vec) {
+		case 0:
+			eng = i;
+			break;
+		case 1:
+			eng = i + 64;
+			break;
+		case 2:
+			eng = i + 128;
+			break;
+		}
+		grp = rvu_read64(rvu, blkaddr, CPT_AF_EXEX_CTL2(eng)) & 0xFF;
+		/* Disable and enable the engine which triggers fault */
+		rvu_write64(rvu, blkaddr, CPT_AF_EXEX_CTL2(eng), 0x0);
+		val = rvu_read64(rvu, blkaddr, CPT_AF_EXEX_CTL(eng));
+		rvu_write64(rvu, blkaddr, CPT_AF_EXEX_CTL(eng), val & ~1ULL);
+
+		rvu_write64(rvu, blkaddr, CPT_AF_EXEX_CTL2(eng), grp);
+		rvu_write64(rvu, blkaddr, CPT_AF_EXEX_CTL(eng), val | 1ULL);
 	}
-
-	rvu_write64(rvu, blkaddr, CPT_AF_FLTX_INT(0), reg0);
-	rvu_write64(rvu, blkaddr, CPT_AF_FLTX_INT(1), reg1);
-	if (!is_rvu_otx2(rvu))
-		rvu_write64(rvu, blkaddr, CPT_AF_FLTX_INT(2), reg2);
+	rvu_write64(rvu, blkaddr, CPT_AF_FLTX_INT(vec), reg);
 
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t rvu_cpt_af_flt0_intr_handler(int irq, void *ptr)
+{
+	return cpt_af_flt_intr_handler(CPT_AF_INT_VEC_FLT0, ptr);
+}
+
+static irqreturn_t rvu_cpt_af_flt1_intr_handler(int irq, void *ptr)
+{
+	return cpt_af_flt_intr_handler(CPT_AF_INT_VEC_FLT1, ptr);
+}
+
+static irqreturn_t rvu_cpt_af_flt2_intr_handler(int irq, void *ptr)
+{
+	return cpt_af_flt_intr_handler(CPT_10K_AF_INT_VEC_FLT2, ptr);
+}
+
 static irqreturn_t rvu_cpt_af_rvu_intr_handler(int irq, void *ptr)
 {
 	struct rvu_block *block = ptr;
@@ -119,8 +145,10 @@ static void cpt_10k_unregister_interrupts(struct rvu_block *block, int off)
 	int i;
 
 	/* Disable all CPT AF interrupts */
-	for (i = 0; i < CPT_10K_AF_INT_VEC_RVU; i++)
-		rvu_write64(rvu, blkaddr, CPT_AF_FLTX_INT_ENA_W1C(i), 0x1);
+	rvu_write64(rvu, blkaddr, CPT_AF_FLTX_INT_ENA_W1C(0), ~0ULL);
+	rvu_write64(rvu, blkaddr, CPT_AF_FLTX_INT_ENA_W1C(1), ~0ULL);
+	rvu_write64(rvu, blkaddr, CPT_AF_FLTX_INT_ENA_W1C(2), 0xFFFF);
+
 	rvu_write64(rvu, blkaddr, CPT_AF_RVU_INT_ENA_W1C, 0x1);
 	rvu_write64(rvu, blkaddr, CPT_AF_RAS_INT_ENA_W1C, 0x1);
 
@@ -151,7 +179,7 @@ static void cpt_unregister_interrupts(struct rvu *rvu, int blkaddr)
 
 	/* Disable all CPT AF interrupts */
 	for (i = 0; i < CPT_AF_INT_VEC_RVU; i++)
-		rvu_write64(rvu, blkaddr, CPT_AF_FLTX_INT_ENA_W1C(i), 0x1);
+		rvu_write64(rvu, blkaddr, CPT_AF_FLTX_INT_ENA_W1C(i), ~0ULL);
 	rvu_write64(rvu, blkaddr, CPT_AF_RVU_INT_ENA_W1C, 0x1);
 	rvu_write64(rvu, blkaddr, CPT_AF_RAS_INT_ENA_W1C, 0x1);
 
@@ -172,16 +200,31 @@ static int cpt_10k_register_interrupts(struct rvu_block *block, int off)
 {
 	struct rvu *rvu = block->rvu;
 	int blkaddr = block->addr;
+	irq_handler_t flt_fn;
 	int i, ret;
 
 	for (i = CPT_10K_AF_INT_VEC_FLT0; i < CPT_10K_AF_INT_VEC_RVU; i++) {
 		sprintf(&rvu->irq_name[(off + i) * NAME_SIZE], "CPTAF FLT%d", i);
+
+		switch (i) {
+		case CPT_10K_AF_INT_VEC_FLT0:
+			flt_fn = rvu_cpt_af_flt0_intr_handler;
+			break;
+		case CPT_10K_AF_INT_VEC_FLT1:
+			flt_fn = rvu_cpt_af_flt1_intr_handler;
+			break;
+		case CPT_10K_AF_INT_VEC_FLT2:
+			flt_fn = rvu_cpt_af_flt2_intr_handler;
+			break;
+		}
 		ret = rvu_cpt_do_register_interrupt(block, off + i,
-						    rvu_cpt_af_flt_intr_handler,
-						    &rvu->irq_name[(off + i) * NAME_SIZE]);
+						    flt_fn, &rvu->irq_name[(off + i) * NAME_SIZE]);
 		if (ret)
 			goto err;
-		rvu_write64(rvu, blkaddr, CPT_AF_FLTX_INT_ENA_W1S(i), 0x1);
+		if (i == CPT_10K_AF_INT_VEC_FLT2)
+			rvu_write64(rvu, blkaddr, CPT_AF_FLTX_INT_ENA_W1S(i), 0xFFFF);
+		else
+			rvu_write64(rvu, blkaddr, CPT_AF_FLTX_INT_ENA_W1S(i), ~0ULL);
 	}
 
 	ret = rvu_cpt_do_register_interrupt(block, off + CPT_10K_AF_INT_VEC_RVU,
@@ -208,6 +251,7 @@ static int cpt_register_interrupts(struct rvu *rvu, int blkaddr)
 {
 	struct rvu_hwinfo *hw = rvu->hw;
 	struct rvu_block *block;
+	irq_handler_t flt_fn;
 	int i, offs, ret = 0;
 
 	if (!is_block_implemented(rvu->hw, blkaddr))
@@ -226,12 +270,19 @@ static int cpt_register_interrupts(struct rvu *rvu, int blkaddr)
 
 	for (i = CPT_AF_INT_VEC_FLT0; i < CPT_AF_INT_VEC_RVU; i++) {
 		sprintf(&rvu->irq_name[(offs + i) * NAME_SIZE], "CPTAF FLT%d", i);
+		switch (i) {
+		case CPT_AF_INT_VEC_FLT0:
+			flt_fn = rvu_cpt_af_flt0_intr_handler;
+			break;
+		case CPT_AF_INT_VEC_FLT1:
+			flt_fn = rvu_cpt_af_flt1_intr_handler;
+			break;
+		}
 		ret = rvu_cpt_do_register_interrupt(block, offs + i,
-						    rvu_cpt_af_flt_intr_handler,
-						    &rvu->irq_name[(offs + i) * NAME_SIZE]);
+						    flt_fn, &rvu->irq_name[(offs + i) * NAME_SIZE]);
 		if (ret)
 			goto err;
-		rvu_write64(rvu, blkaddr, CPT_AF_FLTX_INT_ENA_W1S(i), 0x1);
+		rvu_write64(rvu, blkaddr, CPT_AF_FLTX_INT_ENA_W1S(i), ~0ULL);
 	}
 
 	ret = rvu_cpt_do_register_interrupt(block, offs + CPT_AF_INT_VEC_RVU,
-- 
2.25.1


  parent reply	other threads:[~2023-01-09  7:36 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-09  7:35 [PATCH net-next 0/9] octeontx2-af: Miscellaneous changes for CPT Srujana Challa
2023-01-09  7:35 ` [PATCH net-next,1/9] octeontx2-af: Fix interrupt name strings completely Srujana Challa
2023-01-10  3:46   ` Jakub Kicinski
2023-01-09  7:35 ` Srujana Challa [this message]
2023-01-09  7:35 ` [PATCH net-next,3/9] octeontx2-af: add mbox for CPT LF reset Srujana Challa
2023-01-09  7:35 ` [PATCH net-next,4/9] octeontx2-af: modify FLR sequence for CPT Srujana Challa
2023-01-09  7:35 ` [PATCH net-next,5/9] octeontx2-af: optimize cpt pf identification Srujana Challa
2023-01-09  7:36 ` [PATCH net-next,6/9] octeontx2-af: restore rxc conf after teardown sequence Srujana Challa
2023-01-09  7:36 ` [PATCH net-next,7/9] octeontx2-af: update CPT inbound inline IPsec config mailbox Srujana Challa
2023-01-09  7:36 ` [PATCH net-next,8/9] octeontx2-af: add ctx ilen to cpt lf alloc mailbox Srujana Challa
2023-01-09  7:36 ` [PATCH net-next,9/9] octeontx2-af: add mbox to return CPT_AF_FLT_INT info Srujana Challa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230109073603.861043-3-schalla@marvell.com \
    --to=schalla@marvell.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=gakula@marvell.com \
    --cc=hkelam@marvell.com \
    --cc=jerinj@marvell.com \
    --cc=kuba@kernel.org \
    --cc=lcherian@marvell.com \
    --cc=netdev@vger.kernel.org \
    --cc=sbhatta@marvell.com \
    --cc=sgoutham@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).