netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Wei <dw@davidwei.uk>
To: Jiri Pirko <jiri@resnulli.us>
Cc: Jakub Kicinski <kuba@kernel.org>,
	Sabrina Dubroca <sd@queasysnail.net>,
	netdev@vger.kernel.org, "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Paolo Abeni <pabeni@redhat.com>
Subject: Re: [PATCH net-next v5 2/5] netdevsim: allow two netdevsim ports to be connected
Date: Wed, 3 Jan 2024 13:56:36 -0800	[thread overview]
Message-ID: <29ff3b51-4e51-4f2d-81e5-fd2d6c6869b3@davidwei.uk> (raw)
In-Reply-To: <ZZPvST-nAaBMPKet@nanopsycho>

On 2024-01-02 03:11, Jiri Pirko wrote:
> Thu, Dec 28, 2023 at 02:46:30AM CET, dw@davidwei.uk wrote:
>> Add a debugfs file in
>> /sys/kernel/debug/netdevsim/netdevsimN/ports/A/peer
>>
>> Writing "M B" to this file will link port A of netdevsim N with port B
>> of netdevsim M. Reading this file will return the linked netdevsim id
>> and port, if any.
>>
>> During nsim_dev_peer_write(), nsim_dev_list_lock prevents concurrent
>> modifications to nsim_dev and peer's devlink->lock prevents concurrent
>> modifications to the peer's port_list. rtnl_lock ensures netdevices do
>> not change during the critical section where a link is established.
>>
>> The lock order is consistent with other parts that touch netdevsim and
>> should not deadlock.
>>
>> During nsim_dev_peer_read(), RCU read critical section ensures valid
>> values even if stale.
>>
>> Signed-off-by: David Wei <dw@davidwei.uk>
>> ---
>> drivers/net/netdevsim/dev.c       | 134 +++++++++++++++++++++++++++---
>> drivers/net/netdevsim/netdev.c    |   6 ++
>> drivers/net/netdevsim/netdevsim.h |   1 +
>> 3 files changed, 128 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/net/netdevsim/dev.c b/drivers/net/netdevsim/dev.c
>> index 8d477aa99f94..6d5e4ce08dfd 100644
>> --- a/drivers/net/netdevsim/dev.c
>> +++ b/drivers/net/netdevsim/dev.c
>> @@ -391,6 +391,124 @@ static const struct file_operations nsim_dev_rate_parent_fops = {
>> 	.owner = THIS_MODULE,
>> };
>>
>> +static struct nsim_dev *nsim_dev_find_by_id(unsigned int id)
>> +{
>> +	struct nsim_dev *dev;
>> +
>> +	list_for_each_entry(dev, &nsim_dev_list, list)
>> +		if (dev->nsim_bus_dev->dev.id == id)
>> +			return dev;
>> +
>> +	return NULL;
>> +}
>> +
>> +static struct nsim_dev_port *
>> +__nsim_dev_port_lookup(struct nsim_dev *nsim_dev, enum nsim_dev_port_type type,
>> +		       unsigned int port_index)
>> +{
>> +	struct nsim_dev_port *nsim_dev_port;
>> +
>> +	port_index = nsim_dev_port_index(type, port_index);
>> +	list_for_each_entry(nsim_dev_port, &nsim_dev->port_list, list)
>> +		if (nsim_dev_port->port_index == port_index)
>> +			return nsim_dev_port;
>> +	return NULL;
>> +}
>> +
>> +static ssize_t nsim_dev_peer_read(struct file *file, char __user *data,
>> +				  size_t count, loff_t *ppos)
>> +{
>> +	struct nsim_dev_port *nsim_dev_port;
>> +	struct netdevsim *peer;
>> +	unsigned int id, port;
>> +	ssize_t ret = 0;
>> +	char buf[23];
>> +
>> +	nsim_dev_port = file->private_data;
>> +	rcu_read_lock();
>> +	peer = rcu_dereference(nsim_dev_port->ns->peer);
>> +	if (!peer) {
>> +		rcu_read_unlock();
>> +		return 0;
>> +	}
>> +
>> +	id = peer->nsim_bus_dev->dev.id;
>> +	port = peer->nsim_dev_port->port_index;
>> +	ret = scnprintf(buf, sizeof(buf), "%u %u\n", id, port);
>> +	ret = simple_read_from_buffer(data, count, ppos, buf, ret);
>> +
>> +	rcu_read_unlock();
>> +	return ret;
>> +}
>> +
>> +static ssize_t nsim_dev_peer_write(struct file *file,
>> +				   const char __user *data,
>> +				   size_t count, loff_t *ppos)
>> +{
>> +	struct nsim_dev_port *nsim_dev_port, *peer_dev_port;
>> +	struct nsim_dev *peer_dev;
>> +	unsigned int id, port;
>> +	char buf[22];
>> +	ssize_t ret;
>> +
>> +	if (count >= sizeof(buf))
>> +		return -ENOSPC;
>> +
>> +	ret = copy_from_user(buf, data, count);
>> +	if (ret)
>> +		return -EFAULT;
>> +	buf[count] = '\0';
>> +
>> +	ret = sscanf(buf, "%u %u", &id, &port);
>> +	if (ret != 2) {
>> +		pr_err("Format is peer netdevsim \"id port\" (uint uint)\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	ret = -EINVAL;
>> +	mutex_lock(&nsim_dev_list_lock);
>> +	peer_dev = nsim_dev_find_by_id(id);
>> +	if (!peer_dev) {
>> +		pr_err("Peer netdevsim %u does not exist\n", id);
>> +		goto out_mutex;
>> +	}
>> +
>> +	devl_lock(priv_to_devlink(peer_dev));
> 
> Why exactly do you take devlink instance mutex of the peer here?

To make sure that port list do not change. Ports can be added or removed
at will from nsim_drv_port_add() and nsim_drv_port_del() which both take
the devlink lock.

> 
> 
>> +	rtnl_lock();
>> +	nsim_dev_port = file->private_data;
>> +	peer_dev_port = __nsim_dev_port_lookup(peer_dev, NSIM_DEV_PORT_TYPE_PF,
>> +					       port);
>> +	if (!peer_dev_port) {
>> +		pr_err("Peer netdevsim %u port %u does not exist\n", id, port);
>> +		goto out_devl;
>> +	}
>> +
>> +	if (nsim_dev_port == peer_dev_port) {
>> +		pr_err("Cannot link netdevsim to itself\n");
>> +		goto out_devl;
>> +	}
>> +
>> +	rcu_assign_pointer(nsim_dev_port->ns->peer, peer_dev_port->ns);
>> +	rcu_assign_pointer(peer_dev_port->ns->peer, nsim_dev_port->ns);
>> +	ret = count;
>> +
>> +out_devl:
>> +	rtnl_unlock();
>> +	devl_unlock(priv_to_devlink(peer_dev));
>> +out_mutex:
>> +	mutex_unlock(&nsim_dev_list_lock);
>> +
>> +	return ret;
>> +}
>> +
>> +static const struct file_operations nsim_dev_peer_fops = {
>> +	.open = simple_open,
>> +	.read = nsim_dev_peer_read,
>> +	.write = nsim_dev_peer_write,
>> +	.llseek = generic_file_llseek,
>> +	.owner = THIS_MODULE,
>> +};
>> +
>> static int nsim_dev_port_debugfs_init(struct nsim_dev *nsim_dev,
>> 				      struct nsim_dev_port *nsim_dev_port)
>> {
>> @@ -421,6 +539,9 @@ static int nsim_dev_port_debugfs_init(struct nsim_dev *nsim_dev,
>> 	}
>> 	debugfs_create_symlink("dev", nsim_dev_port->ddir, dev_link_name);
>>
>> +	debugfs_create_file("peer", 0600, nsim_dev_port->ddir,
>> +			    nsim_dev_port, &nsim_dev_peer_fops);
>> +
>> 	return 0;
>> }
>>
>> @@ -1704,19 +1825,6 @@ void nsim_drv_remove(struct nsim_bus_dev *nsim_bus_dev)
>> 	dev_set_drvdata(&nsim_bus_dev->dev, NULL);
>> }
>>
>> -static struct nsim_dev_port *
>> -__nsim_dev_port_lookup(struct nsim_dev *nsim_dev, enum nsim_dev_port_type type,
>> -		       unsigned int port_index)
>> -{
>> -	struct nsim_dev_port *nsim_dev_port;
>> -
>> -	port_index = nsim_dev_port_index(type, port_index);
>> -	list_for_each_entry(nsim_dev_port, &nsim_dev->port_list, list)
>> -		if (nsim_dev_port->port_index == port_index)
>> -			return nsim_dev_port;
>> -	return NULL;
>> -}
>> -
>> int nsim_drv_port_add(struct nsim_bus_dev *nsim_bus_dev, enum nsim_dev_port_type type,
>> 		      unsigned int port_index)
>> {
>> diff --git a/drivers/net/netdevsim/netdev.c b/drivers/net/netdevsim/netdev.c
>> index aecaf5f44374..434322f6a565 100644
>> --- a/drivers/net/netdevsim/netdev.c
>> +++ b/drivers/net/netdevsim/netdev.c
>> @@ -388,6 +388,7 @@ nsim_create(struct nsim_dev *nsim_dev, struct nsim_dev_port *nsim_dev_port)
>> 	ns->nsim_dev = nsim_dev;
>> 	ns->nsim_dev_port = nsim_dev_port;
>> 	ns->nsim_bus_dev = nsim_dev->nsim_bus_dev;
>> +	RCU_INIT_POINTER(ns->peer, NULL);
>> 	SET_NETDEV_DEV(dev, &ns->nsim_bus_dev->dev);
>> 	SET_NETDEV_DEVLINK_PORT(dev, &nsim_dev_port->devlink_port);
>> 	nsim_ethtool_init(ns);
>> @@ -407,8 +408,13 @@ nsim_create(struct nsim_dev *nsim_dev, struct nsim_dev_port *nsim_dev_port)
>> void nsim_destroy(struct netdevsim *ns)
>> {
>> 	struct net_device *dev = ns->netdev;
>> +	struct netdevsim *peer;
>>
>> 	rtnl_lock();
>> +	peer = rtnl_dereference(ns->peer);
>> +	if (peer)
>> +		RCU_INIT_POINTER(peer->peer, NULL);
>> +	RCU_INIT_POINTER(ns->peer, NULL);
>> 	unregister_netdevice(dev);
>> 	if (nsim_dev_port_is_pf(ns->nsim_dev_port)) {
>> 		nsim_macsec_teardown(ns);
>> diff --git a/drivers/net/netdevsim/netdevsim.h b/drivers/net/netdevsim/netdevsim.h
>> index babb61d7790b..24fc3fbda791 100644
>> --- a/drivers/net/netdevsim/netdevsim.h
>> +++ b/drivers/net/netdevsim/netdevsim.h
>> @@ -125,6 +125,7 @@ struct netdevsim {
>> 	} udp_ports;
>>
>> 	struct nsim_ethtool ethtool;
>> +	struct netdevsim __rcu *peer;
>> };
>>
>> struct netdevsim *
>> -- 
>> 2.39.3
>>

  reply	other threads:[~2024-01-03 21:56 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-28  1:46 [PATCH net-next v5 0/5] netdevsim: link and forward skbs between ports David Wei
2023-12-28  1:46 ` [PATCH net-next v5 1/5] netdevsim: maintain a list of probed netdevsims David Wei
2024-01-02 11:04   ` Jiri Pirko
2024-01-03 21:48     ` David Wei
2023-12-28  1:46 ` [PATCH net-next v5 2/5] netdevsim: allow two netdevsim ports to be connected David Wei
2024-01-02 11:11   ` Jiri Pirko
2024-01-03 21:56     ` David Wei [this message]
2024-01-04  9:30       ` Jiri Pirko
2024-01-04  1:39   ` Jakub Kicinski
2024-01-09 16:57     ` David Wei
2024-01-10  1:53       ` Jakub Kicinski
2023-12-28  1:46 ` [PATCH net-next v5 3/5] netdevsim: forward skbs from one connected port to another David Wei
2024-01-02 11:13   ` Jiri Pirko
2024-01-03 22:36     ` David Wei
2024-01-04  9:31       ` Jiri Pirko
2024-01-09 16:58         ` David Wei
2024-01-02 11:20   ` Eric Dumazet
2024-01-03 21:57     ` David Wei
2023-12-28  1:46 ` [PATCH net-next v5 4/5] netdevsim: add selftest for forwarding skb between connected ports David Wei
2023-12-28  1:46 ` [PATCH net-next v5 5/5] netdevsim: add Makefile for selftests David Wei

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=29ff3b51-4e51-4f2d-81e5-fd2d6c6869b3@davidwei.uk \
    --to=dw@davidwei.uk \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=jiri@resnulli.us \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=sd@queasysnail.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).