From: Jose Abreu <Jose.Abreu@synopsys.com>
To: netdev@vger.kernel.org
Cc: Joao Pinto <Joao.Pinto@synopsys.com>,
Jose Abreu <Jose.Abreu@synopsys.com>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
"David S. Miller" <davem@davemloft.net>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH net-next 6/6] net: stmmac: ARP Offload for GMAC4+ Cores
Date: Tue, 10 Sep 2019 16:41:27 +0200 [thread overview]
Message-ID: <9423c111db514a03abfe6ee7f74052245a859d1f.1568126225.git.joabreu@synopsys.com> (raw)
In-Reply-To: <cover.1568126224.git.joabreu@synopsys.com>
In-Reply-To: <cover.1568126224.git.joabreu@synopsys.com>
Implement the ARP Offload feature in GMAC4 and GMAC5 cores.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
drivers/net/ethernet/stmicro/stmmac/dwmac4.h | 3 +++
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 19 +++++++++++++++++++
drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 1 +
3 files changed, 23 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
index e88dac1dd765..89a3420eba42 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
@@ -40,6 +40,7 @@
#define GMAC_HW_FEATURE3 0x00000128
#define GMAC_MDIO_ADDR 0x00000200
#define GMAC_MDIO_DATA 0x00000204
+#define GMAC_ARP_ADDR 0x00000210
#define GMAC_ADDR_HIGH(reg) (0x300 + reg * 8)
#define GMAC_ADDR_LOW(reg) (0x304 + reg * 8)
@@ -165,6 +166,7 @@ enum power_event {
#define GMAC_DEBUG_RPESTS BIT(0)
/* MAC config */
+#define GMAC_CONFIG_ARPEN BIT(31)
#define GMAC_CONFIG_SARC GENMASK(30, 28)
#define GMAC_CONFIG_SARC_SHIFT 28
#define GMAC_CONFIG_IPC BIT(27)
@@ -188,6 +190,7 @@ enum power_event {
#define GMAC_HW_FEAT_TXCOSEL BIT(14)
#define GMAC_HW_FEAT_EEESEL BIT(13)
#define GMAC_HW_FEAT_TSSEL BIT(12)
+#define GMAC_HW_FEAT_ARPOFFSEL BIT(9)
#define GMAC_HW_FEAT_MMCSEL BIT(8)
#define GMAC_HW_FEAT_MGKSEL BIT(7)
#define GMAC_HW_FEAT_RWKSEL BIT(6)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index a99effe61325..9b4b5f69fc02 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -782,6 +782,22 @@ static void dwmac4_enable_vlan(struct mac_device_info *hw, u32 type)
writel(value, ioaddr + GMAC_VLAN_INCL);
}
+static void dwmac4_set_arp_offload(struct mac_device_info *hw, bool en,
+ u32 addr)
+{
+ void __iomem *ioaddr = hw->pcsr;
+ u32 value;
+
+ writel(addr, ioaddr + GMAC_ARP_ADDR);
+
+ value = readl(ioaddr + GMAC_CONFIG);
+ if (en)
+ value |= GMAC_CONFIG_ARPEN;
+ else
+ value &= ~GMAC_CONFIG_ARPEN;
+ writel(value, ioaddr + GMAC_CONFIG);
+}
+
const struct stmmac_ops dwmac4_ops = {
.core_init = dwmac4_core_init,
.set_mac = stmmac_set_mac,
@@ -815,6 +831,7 @@ const struct stmmac_ops dwmac4_ops = {
.update_vlan_hash = dwmac4_update_vlan_hash,
.sarc_configure = dwmac4_sarc_configure,
.enable_vlan = dwmac4_enable_vlan,
+ .set_arp_offload = dwmac4_set_arp_offload,
};
const struct stmmac_ops dwmac410_ops = {
@@ -850,6 +867,7 @@ const struct stmmac_ops dwmac410_ops = {
.update_vlan_hash = dwmac4_update_vlan_hash,
.sarc_configure = dwmac4_sarc_configure,
.enable_vlan = dwmac4_enable_vlan,
+ .set_arp_offload = dwmac4_set_arp_offload,
};
const struct stmmac_ops dwmac510_ops = {
@@ -890,6 +908,7 @@ const struct stmmac_ops dwmac510_ops = {
.update_vlan_hash = dwmac4_update_vlan_hash,
.sarc_configure = dwmac4_sarc_configure,
.enable_vlan = dwmac4_enable_vlan,
+ .set_arp_offload = dwmac4_set_arp_offload,
};
int dwmac4_setup(struct stmmac_priv *priv)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
index f3ca0236450d..68c157979b94 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
@@ -349,6 +349,7 @@ static void dwmac4_get_hw_feature(void __iomem *ioaddr,
dma_cap->tx_coe = (hw_cap & GMAC_HW_FEAT_TXCOSEL) >> 14;
dma_cap->rx_coe = (hw_cap & GMAC_HW_FEAT_RXCOESEL) >> 16;
dma_cap->vlins = (hw_cap & GMAC_HW_FEAT_SAVLANINS) >> 27;
+ dma_cap->arpoffsel = (hw_cap & GMAC_HW_FEAT_ARPOFFSEL) >> 9;
/* MAC HW feature1 */
hw_cap = readl(ioaddr + GMAC_HW_FEATURE1);
--
2.7.4
next prev parent reply other threads:[~2019-09-10 14:41 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-10 14:41 [PATCH net-next 0/6] net: stmmac: Improvements for -next Jose Abreu
2019-09-10 14:41 ` [PATCH net-next 1/6] net: stmmac: Prevent divide-by-zero Jose Abreu
2019-09-10 14:41 ` [PATCH net-next 2/6] net: stmmac: Add VLAN HASH filtering support in GMAC4+ Jose Abreu
2019-09-10 14:41 ` [PATCH net-next 3/6] net: stmmac: xgmac: Reinitialize correctly a variable Jose Abreu
2019-09-10 14:41 ` [PATCH net-next 4/6] net: stmmac: Add support for SA Insertion/Replacement in GMAC4+ Jose Abreu
2019-09-10 14:41 ` [PATCH net-next 5/6] net: stmmac: Add support for VLAN Insertion Offload " Jose Abreu
2019-09-10 14:41 ` Jose Abreu [this message]
2019-09-10 16:50 ` [PATCH net-next 0/6] net: stmmac: Improvements for -next Jose Abreu
2019-09-10 20:36 ` Jesse Brandeburg
2019-09-11 8:21 ` David Miller
2019-09-11 8:59 ` Jose Abreu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9423c111db514a03abfe6ee7f74052245a859d1f.1568126225.git.joabreu@synopsys.com \
--to=jose.abreu@synopsys.com \
--cc=Joao.Pinto@synopsys.com \
--cc=alexandre.torgue@st.com \
--cc=davem@davemloft.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).