From: Sergey Shtylyov <s.shtylyov@omp.ru>
To: Biju Das <biju.das.jz@bp.renesas.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
Andrew Lunn <andrew@lunn.ch>,
Sergei Shtylyov <sergei.shtylyov@gmail.com>,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
Adam Ford <aford173@gmail.com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
<netdev@vger.kernel.org>, <linux-renesas-soc@vger.kernel.org>,
Chris Paterson <Chris.Paterson2@renesas.com>,
Biju Das <biju.das@bp.renesas.com>
Subject: Re: [RFC/PATCH 18/18] ravb: Add set_feature support for RZ/G2L
Date: Thu, 30 Sep 2021 23:39:26 +0300 [thread overview]
Message-ID: <b19b7b83-7b0b-2c48-afc2-6fbf36a5ad98@omp.ru> (raw)
In-Reply-To: <20210923140813.13541-19-biju.das.jz@bp.renesas.com>
On 9/23/21 5:08 PM, Biju Das wrote:
> This patch adds set_feature support for RZ/G2L.
>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
> drivers/net/ethernet/renesas/ravb.h | 32 ++++++++++++++
> drivers/net/ethernet/renesas/ravb_main.c | 56 +++++++++++++++++++++++-
> 2 files changed, 87 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/renesas/ravb.h b/drivers/net/ethernet/renesas/ravb.h
> index d42e8ea981df..2275f27c0672 100644
> --- a/drivers/net/ethernet/renesas/ravb.h
> +++ b/drivers/net/ethernet/renesas/ravb.h
> @@ -209,6 +209,8 @@ enum ravb_reg {
> CXR56 = 0x0770, /* Documented for RZ/G2L only */
> MAFCR = 0x0778,
> CSR0 = 0x0800, /* Documented for RZ/G2L only */
> + CSR1 = 0x0804, /* Documented for RZ/G2L only */
> + CSR2 = 0x0808, /* Documented for RZ/G2L only */
These are the TOE regs (CSR0 included), they only exist on RZ/G2L, no?
[...]
> @@ -978,6 +980,36 @@ enum CSR0_BIT {
> CSR0_RPE = 0x00000020,
> };
>
*enum* CSR0_BIT should be here (as we concluded).
> +enum CSR1_BIT {
[...]
> diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
> index 72aea5875bc5..641ae5553b64 100644
> --- a/drivers/net/ethernet/renesas/ravb_main.c
> +++ b/drivers/net/ethernet/renesas/ravb_main.c
[...]
> @@ -2290,7 +2308,38 @@ static void ravb_set_rx_csum(struct net_device *ndev, bool enable)
> static int ravb_set_features_rgeth(struct net_device *ndev,
> netdev_features_t features)
> {
> - /* Place holder */
> + netdev_features_t changed = features ^ ndev->features;
> + unsigned int reg;
u32 reg;
> + int error;
> +
> + reg = ravb_read(ndev, CSR0);
... as this function returns u32.
> +
> + ravb_write(ndev, reg & ~(CSR0_RPE | CSR0_TPE), CSR0);
> + error = ravb_wait(ndev, CSR0, CSR0_RPE | CSR0_TPE, 0);
> + if (error) {
> + ravb_write(ndev, reg, CSR0);
> + return error;
> + }
> +
> + if (changed & NETIF_F_RXCSUM) {
> + if (features & NETIF_F_RXCSUM)
> + ravb_write(ndev, CSR2_ALL, CSR2);
> + else
> + ravb_write(ndev, 0, CSR2);
> + }
> +
> + if (changed & NETIF_F_HW_CSUM) {
> + if (features & NETIF_F_HW_CSUM) {
> + ravb_write(ndev, CSR1_ALL, CSR1);
> + ndev->features |= NETIF_F_CSUM_MASK;
Hm, I don't understand this... it would be nice if someone knowledgeable about the offloads
would look at this... Although, without the register documentation it's possibly vain...
> + } else {
> + ravb_write(ndev, 0, CSR1);
> + }
> + }
> + ravb_write(ndev, reg, CSR0);
> +
> + ndev->features = features;
> +
> return 0;
> }
>
> @@ -2432,6 +2481,11 @@ static const struct ravb_hw_info rgeth_hw_info = {
> .set_feature = ravb_set_features_rgeth,
> .dmac_init = ravb_dmac_init_rgeth,
> .emac_init = ravb_emac_init_rgeth,
> + .net_hw_features = (NETIF_F_HW_CSUM | NETIF_F_RXCSUM),
> + .gstrings_stats = ravb_gstrings_stats_rgeth,
> + .gstrings_size = sizeof(ravb_gstrings_stats_rgeth),
> + .stats_len = ARRAY_SIZE(ravb_gstrings_stats_rgeth),
These seem unrelated, couldn't it be moved to a spearate patch?
> + .max_rx_len = RGETH_RX_BUFF_MAX + RAVB_ALIGN - 1,
This seems unrelsated and misplaced too.
[...]
MBR, Sergey
next prev parent reply other threads:[~2021-09-30 20:39 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-23 14:07 [RFC/PATCH 00/18] Add Gigabit Ethernet driver support Biju Das
2021-09-23 14:07 ` [RFC/PATCH 01/18] ravb: Rename "ravb_set_features_rx_csum" function to "ravb_set_features_rcar" Biju Das
2021-09-27 19:54 ` Sergey Shtylyov
2021-09-23 14:07 ` [RFC/PATCH 02/18] ravb: Rename the variables "no_ptp_cfg_active" and "ptp_cfg_active" Biju Das
2021-09-23 16:07 ` Sergey Shtylyov
2021-09-23 16:35 ` Biju Das
2021-09-23 17:57 ` Sergey Shtylyov
2021-09-23 18:20 ` Biju Das
2021-09-26 13:34 ` Biju Das
2021-09-23 14:07 ` [RFC/PATCH 03/18] ravb: Initialize GbEthernet dmac Biju Das
2021-09-23 17:41 ` Sergey Shtylyov
2021-09-23 18:42 ` Biju Das
2021-09-23 19:07 ` Sergey Shtylyov
2021-09-23 19:22 ` Biju Das
2021-09-23 19:29 ` Biju Das
2021-09-26 13:38 ` Biju Das
2021-09-23 14:07 ` [RFC/PATCH 04/18] ravb: Enable aligned_tx and tx_counters for RZ/G2L Biju Das
2021-09-23 18:05 ` Sergey Shtylyov
2021-09-23 18:10 ` Sergey Shtylyov
2021-09-23 18:13 ` Biju Das
2021-09-26 13:40 ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 05/18] ravb: Exclude gPTP feature support " Biju Das
2021-09-23 19:00 ` Sergey Shtylyov
2021-09-23 19:13 ` Biju Das
2021-09-23 19:41 ` Sergey Shtylyov
2021-09-23 19:45 ` Biju Das
2021-09-26 13:48 ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 06/18] ravb: Add multi_tsrq to struct ravb_hw_info Biju Das
2021-09-23 20:19 ` Sergey Shtylyov
2021-09-24 6:19 ` Biju Das
2021-09-26 13:54 ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 07/18] ravb: Add magic_pkt " Biju Das
2021-09-23 20:42 ` Sergey Shtylyov
2021-09-24 6:24 ` Biju Das
2021-09-26 13:56 ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 08/18] ravb: Add mii_rgmii_selection " Biju Das
2021-09-24 19:49 ` Sergey Shtylyov
2021-09-25 6:23 ` Biju Das
2021-09-26 15:49 ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 09/18] ravb: Add half_duplex " Biju Das
2021-09-24 20:07 ` Sergey Shtylyov
2021-09-25 6:37 ` Biju Das
2021-09-26 15:51 ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 10/18] ravb: Initialize GbEthernet E-MAC Biju Das
2021-09-24 20:44 ` Sergey Shtylyov
2021-09-25 6:38 ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 11/18] ravb: Add rx_2k_buffers to struct ravb_hw_info Biju Das
2021-09-24 19:35 ` Sergey Shtylyov
2021-09-26 15:48 ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 12/18] ravb: Add timestamp " Biju Das
2021-09-25 20:52 ` Sergey Shtylyov
2021-09-26 6:34 ` Biju Das
2021-09-26 16:52 ` Biju Das
2021-09-26 20:45 ` Sergey Shtylyov
2021-09-26 20:48 ` Sergei Shtylyov
2021-09-27 6:10 ` Biju Das
2021-09-27 6:04 ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 13/18] ravb: Add rx_ring_free function support for GbEthernet Biju Das
2021-09-27 19:28 ` Sergey Shtylyov
2021-09-28 9:24 ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 14/18] ravb: Add rx_ring_format function " Biju Das
2021-09-27 20:32 ` Sergey Shtylyov
2021-09-29 7:49 ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 15/18] ravb: Add rx_alloc helper " Biju Das
2021-09-23 14:08 ` [RFC/PATCH 16/18] ravb: Add Packet receive function for Gigabit Ethernet Biju Das
2021-10-01 17:27 ` Sergey Shtylyov
2021-10-04 14:56 ` Biju Das
2021-09-23 14:08 ` [RFC/PATCH 17/18] ravb: Add carrier_counters to struct ravb_hw_info Biju Das
2021-09-28 20:50 ` Sergey Shtylyov
2021-09-23 14:08 ` [RFC/PATCH 18/18] ravb: Add set_feature support for RZ/G2L Biju Das
2021-09-30 20:39 ` Sergey Shtylyov [this message]
2021-10-01 6:53 ` Biju Das
2021-10-01 9:13 ` Sergey Shtylyov
2021-10-01 9:26 ` Biju Das
2021-10-01 8:22 ` Biju Das
2021-09-23 15:11 ` [RFC/PATCH 00/18] Add Gigabit Ethernet driver support Sergey Shtylyov
2021-09-23 15:13 ` Sergey Shtylyov
2021-09-23 15:37 ` Jakub Kicinski
2021-09-23 17:43 ` Sergey Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b19b7b83-7b0b-2c48-afc2-6fbf36a5ad98@omp.ru \
--to=s.shtylyov@omp.ru \
--cc=Chris.Paterson2@renesas.com \
--cc=aford173@gmail.com \
--cc=andrew@lunn.ch \
--cc=biju.das.jz@bp.renesas.com \
--cc=biju.das@bp.renesas.com \
--cc=davem@davemloft.net \
--cc=geert+renesas@glider.be \
--cc=kuba@kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=sergei.shtylyov@gmail.com \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).